Cart is Empty
Uncle Mike's QD Push Button Quick Detach Swivels with glue in bases. Package of 2.
|
Uncle Mike's QD Swivels. One machine screw and one wood screw stud.
|
Uncle Mike's QD Swivels kit. Kit includes one machine screw mount for Fore end base and one wood screw mount.
|
Uncle Mike's QD Swivels; 1" split band swivel mount; Kit comes with allen wrench and screw in stud and two swivels
|
Uncle Mike's QD Swivels including split barrel band w/Allen wrench (size .630"-.675" Dia.) plus one screw in stud and two sling swivels.
|
Uncle Mike's QD Swivels includes two screw in studs and two 1" sling swivels.
|
Uncle Mike's QD Swivels includes two screw in studs and two 1.25" sling swivels.
|
Uncle Mike's Swivels including split barrel band w/Allen wrench (size .850"-.900" dia.) plus one screw in stud and two 1" sling swivels. For single barrel 12 Ga.
|
Uncle Mike's Swivels including split barrel band w/Allen wrench (size .800"-.850" Dia.) plus one screw in stud and two 1" sling swivels. For Winchester model 101/201 12 Ga. O/U.
|
Uncle Mike's Swivels including split barrel band w/Allen wrench (size .700"-.750" Dia.) plus one screw in stud and two 1" sling swivels.
|
Uncle Mike's QD Swivels including split barrel band w/Allen wrench (size .420"-.470" Dia.) plus one screw in stud and two 1" sling swivels.
|
Uncle Mike's Swivels for pumps and autos. Kit includes end cap with washers, one screw in stud and two 1" swivels.
|
Uncle Mike's Swivels include end cap with stud and a screw in stud and two 1" swivels. For Mossberg 500.
|
Uncle Mike's Swivels include end cap with stud and a screw in stud and two 1" swivels. For Remington 1187 12 gauge.
|
Uncle Mike's Swivels including wrap around barrel band (.645" - 660" Dia) and two 1" swivels for 1969 and newer Remington 7600, 760, 740, 742, and some .22's and centerfires.
|
Uncle Mike's QD Swivels includes fore end bold swivel addapter, one screw in stud, two 1" swivels for Pre 1969 Remington 7600/760/760 ES
|
Uncle Mike's Swivels include end cap with stud and a screw in stud and two 1" swivels. For Remington 870 20G.
|
Uncle Mike's Swivels including two screw in studs and two swivels for single shot and small carbines.
|
Super Swivel includes one BL 1 in. Blued swivel.
|
Uncle Mike's super Heavy duty swivel includes two 1.25" Mil-Spec swivels in silver
|
With simple adjustments the Kwik Stand will fit on most bow limbs including some of the widest limbs on the market. The legs adjust also to allow for the best balance angle for your bow. Perfect for tournament archers and blind hunters. Jaws adjust from 1.28" to 3.14". Legs adjust from 4.25" to 6".
|
Featuring premium Feather Vision lenses. The Feather Vision lens A is mainly used for 2x to 3x power scope lenses depending on scope-to-peep sight length.
|
Nano-Pro X-Treme is specifically engineered for today's competitive recurve bows. When the difference of success can be that of mere millimeters in FITA, NAA and NFAA long-distance field shooting, the Nano-Pro X-Treme is sure to deliver pinpoint accuracy as a result of its multi-spine construction. The Nano-Pro X-Treme recovers faster out of the bow while delivering the flattest trajectory and superior down range accuracy. Keeping true to form of the Nano-Pro series, it has the smallest diameter of any of the Carbon Express target arrows coupled with the parallel shaft design to virtually eliminate cross-wind drift. Straightness: 0.0015", Weight Tolerance: 1.0 grains, Spine Selection Tolerance: 0.002". Available spines: 900 (5.19 gpi) 800 (5.6 gpi), 750 (5.9 gpi), 700 (6.0 gpi), 650 (6.2 gpi), 600 (6.7 gpi), 550 (7.1 gpi), 500 (7.8 gpi), 450 (8.0 gpi), 400 (8.7 gpi), 350 (9.3 gpi).
|
The Ravin Backpack sling creates less shoulder fatigue. Made of non-slip neoprene. Straps adjust for custom fit.
|
Otis brushes have a proprietary Tufcor core wire that is corrosive-resistant with a tighter twist for better bristle retention and brush life. These brushes clean .410 bore shotguns, are 2� long, and fit 8-32 threads. Includes one nylon brush and one bronze brush
|
Carlson’s Cremator Choke Tubes feature Triple Shot Technology (TST) and is offered in close mid and long range constrictions. TST is a series of three graduated rings in the taper section of the choke tube that allows a more gradual transition from the shotgun bore to the final constriction. This design offers reduced pellet deformation, less flyers and more dense patterns. These benefits make the Cremator Series effective on all types of waterfowl throughout the entire season. The Cremator series has no size or speed restrictions with steel shot in any of the three constrictions. You also get all the benefits of an extended choke tube, including a 25% longer parallel section for tighter and more dense patterns, wrench-less installation, quick removal and helps with muzzle protection. They are offered in your choice of ported or non-ported configurations. Like all of our tubes Carlson’s Cremator Series Choke Tubes are made in the U.S.A.,  carry a lifetime warranty and are precision-machined from heat-treated 17-4 stainless steel.
|