Cart is Empty
Anschutz - Rear Mount: 1568. Churchill - Rear Mount: 590 and 590-C. Knight Muzzleloaders - Rear Mount: Knight MK-85, BK-92, and T-Bolt (flat receivers). Front Mount: Knight MK-85, BK-92, and T-Bolt (flat receivers). Ithaca - Rear Mount: LSA-55 and LSA-65. Front Mount: LSA-55 and LSA-65. Sako - Rear Mount: Whitetail Hunter. Front Mount: Whitetail Hunter. Savage - Rear Mount: 10, 12, and 16 (short actions). Striker, Pstl , 510, 512, 516 S/ A, 10 ML (2-piece only) pre-2003 models, 110, 112, 116 (long actions); 210 Shtg (use X-high rings) pre-2003 models. Front Mount: 10, 12, and 16 (short actions). Striker, Pstl, 510, 512, 516 S/ A, 10 ML (2-piece only) pre-2003 models, 110, 112, 116 (long actions); 210 Shtg (use X-high rings) pre-2003 models. Note: For shorter tube scopes or red dot scopes use #402 extension front base or one-piece base if available. Extension base allows an extra 0.689". Shlien - Rear Mount: Flat Top Receiver. Front Mount: Flat Top Receiver. Stevens - Rear Mount: 110E. Tikka - Rear Mount: Tikka with Flat Receiver. Front Mount: Tikka with Flat Receiver. |
Anschutz: 1568. Browning: Bolt Action BBR, Hi-Power, other select calibers, older models, long and short actions. Churchill: 950/950-C, 972-C. Cooey: 71. Colt: 57. Enfield: with receiver cut down like a Winchester 70. H&R: 300, 301, 330, 370. Herters: J9. Musgrave: Mark III/IV. Marlin: 455, MR7. Mauser: Receiver Ring with 1.410" diameter (98FN). Navy Arms: Country Boy Muzzleloader Sears: 50, 51, 53. Parker Hale: 1000, 1000C, 1100, 1200, 1700. Savage: Axis Series short actions, 10, 12, 16. Striker Pistols: 510, 512, 516 S/A, 2-piece pre-2003 models 10 ML, long actions 110, 112, 116, pre-2003 model 210 Shotgun, long action Accutriggger 10, 12, 110, 112, 10 ML II. Stevens: 110E, 200. Weatherby: FN Mauser-style actions. Winchester: 52, 70 long action, 670, 770, 70 long action, 70 Super Express, post-1984 70 short action, 70 WSM. Voere: 2150, 2165/1, 2165/2, 2165/3, 2165/4, Mauser action, 45, 46. |
Rear Base for: Browning BLR with flat top receiver (older models). BSA other high powers. Marlin 39A, 39D, and Century (octagon barrel). Herters U9, BSA Action. Voere 2130. Front Base for: Browning BLR with flat top receiver (older models). BSA other high powers. Herters U9, BSA Action. Voere 2130. |
Browning – Rear Mount: A-Bolt, A-Bolt 22 Stalker; Medallion, BBR (Bolt Action), Long & Short Actions. Front Mount: A-Bolt, A-Bolt 22 Stalker, Medallion. Marlin – Rear Mount: MR7. Cooey – Rear Mount: 71. Enfield – Rear Mount: with receiver cut down like a Winchester 70. Sears – Rear Mount: 53. Winchester, includes Ranger models – Rear Mount: 70 Long Action (hole spacing same), 670, 770, 70 Short Action (1984+), 70 WSM. |
Beretta: Rear Mount – Pintail slug gun, Front Mount – pintail slug gun. BSA: Front Mount – Monarch Medium Action in 222, 243, and 308, CF2, Monarch Long Action in 7mm, 270, and 30-06. Churchill: Front Mount – Highlander. Colt: Rear Mount – Sauer, Front Mount – Sauer. Enfield: Front Mount – With receiver cut down like Remington 721. Herters: Front Mount – U9 Round Receiver. Howa: Front Mount – Howa. Mossberg: Front Mount – 100 ATR, 1500, 1700. Raptor Arms: Front Mount – Same as Remington 700 Long Action. Remington: Front Mount – 700, 78, 40x-L, 721, 725 (all long actions), 700, 78, 40x-S, 722, 725 (all short actions), 700 muzzleloader. Sauer: Rear Mount – Round Receiver, Front Mount – Round Receiver. Shilen: Rear Mount – Round Receiver, Front Mount – Round Receiver. Smith & Wesson: Front Mount – 1500, 1600, and 1700. Weatherby: Front Mount – Vanguard. |
Smith & Wesson 29, 629, 625, 686 L, K, and N Frame revolvers (factory drilled). Taurus L, K, and N Frame revolvers (factory drilled). Note: Remove rear sight to use. Must be factory drilled and tapped. Not for use with X-frame revolvers. Use on firearms under than those listed may cause injury. |
An aluminum base for the Winchester 70 Short Action (1984+). Machined to tight tolerances for a custom fit.
|
One-piece base for Winchester 70 Long Action (same hole spacing) 670 and 770. Made of aluminum with tight tolerances. Note: The handiest way to pinpoint the correct base for the Winchester 52 & Winchester 70 Long Action Rifles is to check the spacing of the tapped holes for the rear base and compare it to the hole spacing for the front base. For hole spacing the same, Model 70, use 47+ 46.
|
A one-piece aluminum base for Winchester 1200, 1300, 1400, and 1500 shotguns.
|
Superior quality crossbow cables made from tri-color Velocity Plus material. Feature tight nylon center serving and end loops. Sold per pair.
|
The FW1 Stabilizer Enhancer Node utilizes double Broadband design to greatly reduce vibration and help your bow settle faster for a smoother shot. Can be used with any stabilizer that has a 5/16" thread mount. You can add as much weight as you want, weights sold seperately. Diameter: 1.65", weight: 1.6 oz.
|
The Treelimb Riser Mount allows you to move your quiver off your sight and mount it directly to your riser. Works with both standard and premium quivers. Premium series mounting posts not included. Ambidextrous.
|
Nano-XRZ featuring Tri-Spine technology which combines stiffer ends with a softer spine center for ultimate accuracy out of a compound bow. Like the Nano-SST for recurve archers the Nano-XRZ is constructed from 30-Ton carbon that ensures faster recovery out of the bow and superior down range performance. Straightness: .0025�, Weight Tolerance: 2 grains. Available sizes: 350 (9.9 gpi), 400 (9.0 gpi), 500 (7.8 gpi), 600 (7.0 gpi), 700 (6.3 gpi), 800 (5.7 gpi).
|
Butch's Bore Shine a non-abrasive chemical solvent is specifically designed to remove all forms of bore fouling including copper with an absolute minimum of effort and no damage. It will quickly remove carbon build-up, even in difficult to clean areas like the chamber throat. It also removes lead, wax and even plastic shotgun wad build up.
|
The Titan 3D Face Mask is a one size fits all, all in one full cover 3D camouflage leafy face mask with a generous opening that is convenient for people with glasses. It is fully adjustable and the face mask also features two straps to help snug the mask to the back of your head. The metal nose piece contours the front to fit your nose with the use of the two cinch straps to snug the mask to your face. This mask is designed to be worn when turkey hunting, stalking game from the ground or when still hunting from a tree stand.
|