Cart is Empty
Anschutz - Rear Mount: 1568. Churchill - Rear Mount: 590 and 590-C. Knight Muzzleloaders - Rear Mount: Knight MK-85, BK-92, and T-Bolt (flat receivers). Front Mount: Knight MK-85, BK-92, and T-Bolt (flat receivers). Ithaca - Rear Mount: LSA-55 and LSA-65. Front Mount: LSA-55 and LSA-65. Sako - Rear Mount: Whitetail Hunter. Front Mount: Whitetail Hunter. Savage - Rear Mount: 10, 12, and 16 (short actions). Striker, Pstl , 510, 512, 516 S/ A, 10 ML (2-piece only) pre-2003 models, 110, 112, 116 (long actions); 210 Shtg (use X-high rings) pre-2003 models. Front Mount: 10, 12, and 16 (short actions). Striker, Pstl, 510, 512, 516 S/ A, 10 ML (2-piece only) pre-2003 models, 110, 112, 116 (long actions); 210 Shtg (use X-high rings) pre-2003 models. Note: For shorter tube scopes or red dot scopes use #402 extension front base or one-piece base if available. Extension base allows an extra 0.689". Shlien - Rear Mount: Flat Top Receiver. Front Mount: Flat Top Receiver. Stevens - Rear Mount: 110E. Tikka - Rear Mount: Tikka with Flat Receiver. Front Mount: Tikka with Flat Receiver. |
Anschutz: 1568. Browning: Bolt Action BBR, Hi-Power, other select calibers, older models, long and short actions. Churchill: 950/950-C, 972-C. Cooey: 71. Colt: 57. Enfield: with receiver cut down like a Winchester 70. H&R: 300, 301, 330, 370. Herters: J9. Musgrave: Mark III/IV. Marlin: 455, MR7. Mauser: Receiver Ring with 1.410" diameter (98FN). Navy Arms: Country Boy Muzzleloader Sears: 50, 51, 53. Parker Hale: 1000, 1000C, 1100, 1200, 1700. Savage: Axis Series short actions, 10, 12, 16. Striker Pistols: 510, 512, 516 S/A, 2-piece pre-2003 models 10 ML, long actions 110, 112, 116, pre-2003 model 210 Shotgun, long action Accutriggger 10, 12, 110, 112, 10 ML II. Stevens: 110E, 200. Weatherby: FN Mauser-style actions. Winchester: 52, 70 long action, 670, 770, 70 long action, 70 Super Express, post-1984 70 short action, 70 WSM. Voere: 2150, 2165/1, 2165/2, 2165/3, 2165/4, Mauser action, 45, 46. |
Rear Base for: Browning BLR with flat top receiver (older models). BSA other high powers. Marlin 39A, 39D, and Century (octagon barrel). Herters U9, BSA Action. Voere 2130. Front Base for: Browning BLR with flat top receiver (older models). BSA other high powers. Herters U9, BSA Action. Voere 2130. |
Browning – Rear Mount: A-Bolt, A-Bolt 22 Stalker; Medallion, BBR (Bolt Action), Long & Short Actions. Front Mount: A-Bolt, A-Bolt 22 Stalker, Medallion. Marlin – Rear Mount: MR7. Cooey – Rear Mount: 71. Enfield – Rear Mount: with receiver cut down like a Winchester 70. Sears – Rear Mount: 53. Winchester, includes Ranger models – Rear Mount: 70 Long Action (hole spacing same), 670, 770, 70 Short Action (1984+), 70 WSM. |
Beretta: Rear Mount – Pintail slug gun, Front Mount – pintail slug gun. BSA: Front Mount – Monarch Medium Action in 222, 243, and 308, CF2, Monarch Long Action in 7mm, 270, and 30-06. Churchill: Front Mount – Highlander. Colt: Rear Mount – Sauer, Front Mount – Sauer. Enfield: Front Mount – With receiver cut down like Remington 721. Herters: Front Mount – U9 Round Receiver. Howa: Front Mount – Howa. Mossberg: Front Mount – 100 ATR, 1500, 1700. Raptor Arms: Front Mount – Same as Remington 700 Long Action. Remington: Front Mount – 700, 78, 40x-L, 721, 725 (all long actions), 700, 78, 40x-S, 722, 725 (all short actions), 700 muzzleloader. Sauer: Rear Mount – Round Receiver, Front Mount – Round Receiver. Shilen: Rear Mount – Round Receiver, Front Mount – Round Receiver. Smith & Wesson: Front Mount – 1500, 1600, and 1700. Weatherby: Front Mount – Vanguard. |
Smith & Wesson 29, 629, 625, 686 L, K, and N Frame revolvers (factory drilled). Taurus L, K, and N Frame revolvers (factory drilled). Note: Remove rear sight to use. Must be factory drilled and tapped. Not for use with X-frame revolvers. Use on firearms under than those listed may cause injury. |
An aluminum base for the Winchester 70 Short Action (1984+). Machined to tight tolerances for a custom fit.
|
One-piece base for Winchester 70 Long Action (same hole spacing) 670 and 770. Made of aluminum with tight tolerances. Note: The handiest way to pinpoint the correct base for the Winchester 52 & Winchester 70 Long Action Rifles is to check the spacing of the tapped holes for the rear base and compare it to the hole spacing for the front base. For hole spacing the same, Model 70, use 47+ 46.
|
A one-piece aluminum base for Winchester 1200, 1300, 1400, and 1500 shotguns.
|
Quick, quiet, and easy to use climbing sticks designed to nest together and mount directly on the Assault or Alpha tree stands. Features reversible steps and pivoting v-brackets to match the contour of the tree. Length: 32 in. (per stick), Weight Capacity: 350 lbs., Weight: 2.5 lbs. (per stick).
|
Reduced diameter shaft designed for durability and accuracy in wind and other inclement weather. Straightness tolerance of +-.0025� and weight tolerance of +- 0.5 grains. Available in sizes 500 (7.6 GPI), 400 (9.5 GPI), 340 (9.9 GPI), 300 (10.4 GPI) and 200 (11.6 GPI). Includes Accu-Tough inserts with Ballistic collar and GTO nocks with bushings. Factory fletched with 2 in. Raptor vanes.
|
A rechargeable work light with bright white light in spot and flood modes. Hands-free design with magnetic base, hang hook, and clamps. The lithium ion battery recharges in 5.5 hours. Thermoplastic construction with chemical-resistant lens that withstands common automotive chemicals. IPX4 water resistant and 1m impact tested. Weighs 2 lbs 3 oz.
|
This line of holsters delivers on both incredible quality and added functionality. Made to mirror our Belt Holster line up, this new line of OR holsters will work with every firearm that our BH line works with while adding the OR cut necessary to carry most types of optics. As an added bonus each of these holsters is also equipped with a sweat guard or shield that protects you from your firearm rubbing against your body and protects any controls you may have on your firearm including manual safeties and de-cockers.
|
Can be used for medium game and personal defense
|