Cart is Empty
Glue in point for 3DHV arrow shafts.
|
Stainless steel break off glue in point allows adjustability in 20 grain increments. Fits 3DHV 300-350 spine and all RIP shafts.
|
Glue in point for V-Tac 23 arrow shaft.
|
Glue in point for V-Tac 23 arrow shaft.
|
Glue in point for V-Tac 23 arrow shaft.
|
Glue in point for V-Tac 25 arrow shaft.
|
Glue in point for V-Tac 25 arrow shaft.
|
Glue in point for V-Tac 25 arrow shaft.
|
Glue in point for V-Tac 25 arrow shaft.
|
Glue in point for V-Tac 27 arrow shaft.
|
Glue in point for V-Tac 27 arrow shaft.
|
Press fit nock for use in Gold Tip Pierce arrow shafts and .166� nock bushings. Weight: 5 gr.
|
This specialized Short Draw Insight peep utilizes a 52 degree string groove. The increased string angle makes the InSight Short Draw Peep ideal for shooters with a shorter draw length who might otherwise struggle to get their peep to sit parallel with the arrow at full draw. Weighing in at only 14 grains, the InSight Short Draw Peep Housing has light baffles on the inside of the housing to eliminate glare.
|
The Zen vane is a low profile shield cut vane designed for indoor spot shooting. Solves clearance issues when using large diameter shafts. Length: 4�, Height: 0.37�, Weight: 12.5 grains.
|
The Fearsome 4 includes the Double Dead, Cutt'n 2.5, Double D and Power V calls along with a call box for storage.
|
The V-Tec 23 target arrow shaft is a large diameter shaft with a .314 ID high modulus 100% carbon fiber construction for increased speed and accuracy with line cutting abilities. Every shaft is digitally spine aligned for increased accuracy for shot to shot consistency. With the advanced Nano Ceramic arrow coating also improves penetration and easy arrow removal. Straightness tolerance of +- .003� and weight tolerance of +- 0.5 grains. Available in sizes 270 (7.2 GPI), 380 (6.8 GPI), 480 (7.2 GPI). F nocks and nock unibushing included. Inserts and target point sold separately.
|
The V-Tec 23 target arrow shaft is a large diameter shaft with a .314 ID high modulus 100% carbon fiber construction for increased speed and accuracy with line cutting abilities. Every shaft is digitally spine aligned for increased accuracy for shot to shot consistency. With the advanced Nano Ceramic arrow coating also improves penetration and easy arrow removal. Straightness tolerance of +- .006� and weight tolerance of +- 0.5 grains. Available in sizes 270 (7.2 GPI), 380 (6.8 GPI), 480 (7.2 GPI). F nocks and nock unibushing included. Inserts and target point sold separately.
|