Cart is Empty
Adjustable sight features a Harmoic Damper and Accu-Click system which allows the shooter to set “clicks” at desired distances. As the sight elevation is adjusted, it will stop at those specified distances. A 45 degree facing sight tape makes it easier for the shooter to see where the yardage indicator is set. 1st, 2nd, and 3rd axis adjustments can be made without the use of shims. Micro adjust windage is locked into place until the Windage Lock Button is disengaged. Includes Accu-Stat scope with an adjustable rheostat fiber cover and micro adjustable pins.
|
Adjustable sight features a Harmoic Damper and Accu-Click system which allows the shooter to set “clicks” at desired distances. As the sight elevation is adjusted, it will stop at those specified distances. A 45 degree facing sight tape makes it easier for the shooter to see where the yardage indicator is set. 1st, 2nd, and 3rd axis adjustments can be made without the use of shims. Micro adjust windage is locked into place until the Windage Lock Button is disengaged. Includes Accu-Stat scope with an adjustable rheostat fiber cover and micro adjustable pins.
|
Official target faces for NFAA Field Round. Set of target faces for 14 target butts. Set includes the following faces: 20cm (16), 35cm (16), 50cm (10), 65cm (4).
|
The proven performance of the XT Hunter in a high speed shaft. Straightness tolerance of +- .003” and weight tolerance of +- 2 grains. Available in sizes 600 (5.9 GPI), 500 (6.3 GPI), 400 (7.4 GPI), 340 (8.2 GPI), and 300 (8.8 GPI). Includes Accu-Lite nocks and inserts.
|
Hybrid broadhead featuring a machined aluminum ferrule, 2.3" cutting diameter, 7/8" wide cut on contact tip, .030" cut on contact tip blade and .035" wing blades. 2 pack.
|
Alpine branded long sleeve tee featuring 4.2oz, 100% arilume combed and rung spun cotton.
|
A two-die set intended for reloading bottleneck cases, and consists of a Full-Length Sizer Die with an Expander-Decapping Unit, and a Seater Die with Bullet Seater Plug. The Full-Length Sizer Die brings the case to SAAMI minimum cartridge dimensions. It sizes the outside of the case, de-primes and expands the neck to accept the bullet. The Die has vents to prevent case damage caused by trapped air and for excessive lubricant. Headspace is held to minimum tolerances to avoid changing the case body length during full-length sizing. The included Seater Die has a built-in roll crimper to secure the bullet at the same time it is seated.
|
The ideal balance of protection and comfort, allowing four possible carry positions: Vertical, Horizontal, Cross-Draw, or Inside-The-Waistband. No other holster provides the same high-quality craftsmanship in and extremely versatile design. The 4WH provides maximum flexibility with IWB and OWB carry positions available all in one sturdy, leather belt holster.
|