Since 1998, eders.com has offered the largest selection archery and hunting equipment at the best prices. For even more savings on Archery and BowHunting Supplies, Join our Professional Bowhunter Buyer's Club, membership is NOW FREE for all.
Get Free Standard Shipping on all orders over $200.00. Just type: freeshipping in the coupon field during checkout.
Designed specifically for use with crossbows to withstand higher velocities and stabilize short crossbow bolts up to 100 yards. Made from a stiffer vane material than standard vanes. Length: 3.5�, Profile: .5�, Weight: 11.5 gr.
The Cauldron Jig is a 3 vane advanced fletching system. It provides the right amount of pressure for excellent adhesion, and you can fletch all three vanes at once so it's a big time-saver. The snap-in inserts are easy to change and don't require tools, so you can switch from a three degree right helical to a one degree right in no time. With this jig you can leave the nock on your arrow so you don't need to change the center post - simply twist the dial at the bottom of the jig to rotate your arrow for perfect indexing. The Cauldron pressure ring is adjustable with a single twist to accommodate micro, standard, and large arrow diameters. Cleaning is easy: the inserts can be soaked in acetone for an hour to remove instant glue residue.
Tower fletching jig allows you to fletch all three vanes at once. Includes 7 sets of arms - Straight (Up to 4� vane), 1 degree offset (Up to 4� vane), 3 degree right helical (Up to 2.25� vanes), 1 degree offset (for Impulse vanes), 2 degree right wing feather, 2 degree left wing feather arms, and Mylar vane arms. Center posts for standard carbon, F nock, A nock, pin nock, HE nock, swedged shafts and crossbow bolts are also included. Three different clamping rings accept any size arrow shaft.
Water-based Crest-Lac paints produce a glossy, durable finish and improves fletching adhesion. Formulated specifically for cresting and dipping arrows, with optimal flow and leveling so brush marks don't show when dry, and non-bleeding properties that achieve crisp edges on even the finest cresting stripes. A new coating technology that prevents Crest-Lac from separating as quickly as other water-based paints, also allowing Crest-Lac to be easily mixed back to a perfect consistency. Crest-Lac is an acrylic, water-based paint (no VOC) that dries in 24-36 hours, depending on the humidity present in the drying area. Safe for Air, Ocean, or Ground transport. Pro Tip: If thinning use distilled water NOT paint thinner.
Water-based Crest-Lac paints produce a glossy, durable finish and improves fletching adhesion. Formulated specifically for cresting and dipping arrows, with optimal flow and leveling so brush marks don't show when dry, and non-bleeding properties that achieve crisp edges on even the finest cresting stripes. A new coating technology that prevents Crest-Lac from separating as quickly as other water-based paints, also allowing Crest-Lac to be easily mixed back to a perfect consistency. Crest-Lac is an acrylic, water-based paint (no VOC) that dries in 24-36 hours, depending on the humidity present in the drying area. Safe for Air, Ocean, or Ground transport. Pro Tip: If thinning use distilled water NOT paint thinner.
Apply Bohning Feather Fletching Tape to feather quill for a strong, reliable bond. Use for emergency field repair, will fletch 3 1/2 dozen arrows. 720" per roll.
Low-temp hot melt for carbon shafts, instant full strength set-up in cold water. Super strong, easy to apply heat reversible. Stick will do approximately 144 inserts.
Bohning Ferr-L-Tite Melt Stick softens under flame. Good for inserting aluminum broadhead adapters and target points, reheating will allow point to be removed.
Fletch Fuse is designed for use with vanes, feathers and nocks. It has a clamp time of 30 seconds and a cure time of 2 minutes. Comes in a 1/2 oz. bottle.
A solvent based paint formulated for dipping and cresting and used to customize aluminum, wood or carbon that dries to a hard chip-resistant finish. Dries on all shafts within a 24 hour period and improves fletching adhesion. Comes in convenient 1 oz. jar for easy storage. Thin with Fletch-Lac thinner for better consistency.
A solvent based paint formulated for dipping and cresting and used to customize aluminum, wood or carbon that dries to a hard chip-resistant finish. Dries on all shafts within a 24 hour period and improves fletching adhesion. Comes in convenient 1 oz. jar for easy storage. Thin with Fletch-Lac thinner for better consistency.
A solvent based paint formulated for dipping and cresting and used to customize aluminum, wood or carbon that dries to a hard chip-resistant finish. Dries on all shafts within a 24 hour period and improves fletching adhesion. Comes in convenient 1 oz. jar for easy storage. Thin with Fletch-Lac thinner for better consistency.
A solvent based paint formulated for dipping and cresting and used to customize aluminum, wood or carbon that dries to a hard chip-resistant finish. Dries on all shafts within a 24 hour period and improves fletching adhesion. Comes in convenient 1 oz. jar for easy storage. Thin with Fletch-Lac thinner for better consistency.
A solvent based paint formulated for dipping and cresting and used to customize aluminum, wood or carbon that dries to a hard chip-resistant finish. Dries on all shafts within a 24 hour period and improves fletching adhesion. Comes in convenient 1 oz. jar for easy storage. Thin with Fletch-Lac thinner for better consistency.
A solvent based paint formulated for dipping and cresting and used to customize aluminum, wood or carbon that dries to a hard chip-resistant finish. Dries on all shafts within a 24 hour period and improves fletching adhesion. Comes in convenient 1 oz. jar for easy storage. Thin with Fletch-Lac thinner for better consistency.
A solvent based paint formulated for dipping and cresting and used to customize aluminum, wood or carbon that dries to a hard chip-resistant finish. Dries on all shafts within a 24 hour period and improves fletching adhesion. Comes in convenient 1 oz. jar for easy storage. Thin with Fletch-Lac thinner for better consistency.
Bohning Glue Bottle Dispenser w/Tip is a clear bottle with applicator tip designed to hold 2 oz of solvent or adhesive. Comes with red cap for air tight seal.
The Griffin Vane is designed specifically for olympic recurve archers. The twisted ribbon design aids in immediate arrow rotation and the minimal surface area resulting from the cut-out profile provides a stable & accurate flight in variable, constant, and zero wind shooting scenarios. Weighing 1.2 grains the Griffin can be fletched with a standard Pro Class Style Jig using glue or tape.
The Griffin Vane is designed specifically for olympic recurve archers. The twisted ribbon design aids in immediate arrow rotation and the minimal surface area resulting from the cut-out profile provides a stable & accurate flight in variable, constant, and zero wind shooting scenarios. Weighing 1.2 grains the Griffin can be fletched with a standard Pro Class Style Jig using glue or tape.
The Griffin Vane is designed specifically for olympic recurve archers. The twisted ribbon design aids in immediate arrow rotation and the minimal surface area resulting from the cut-out profile provides a stable & accurate flight in variable, constant, and zero wind shooting scenarios. Weighing 1.2 grains the Griffin can be fletched with a standard Pro Class Style Jig using glue or tape.
The Griffin Vane is designed specifically for olympic recurve archers. The twisted ribbon design aids in immediate arrow rotation and the minimal surface area resulting from the cut-out profile provides a stable & accurate flight in variable, constant, and zero wind shooting scenarios. Weighing 1.2 grains the Griffin can be fletched with a standard Pro Class Style Jig using glue or tape.
The Griffin Vane is designed specifically for olympic recurve archers. The twisted ribbon design aids in immediate arrow rotation and the minimal surface area resulting from the cut-out profile provides a stable & accurate flight in variable, constant, and zero wind shooting scenarios. Weighing 1.2 grains the Griffin can be fletched with a standard Pro Class Style Jig using glue or tape.
The Griffin Vane is designed specifically for olympic recurve archers. The twisted ribbon design aids in immediate arrow rotation and the minimal surface area resulting from the cut-out profile provides a stable & accurate flight in variable, constant, and zero wind shooting scenarios. Weighing 1.2 grains the Griffin can be fletched with a standard Pro Class Style Jig using glue or tape.
The Griffin Vane is designed specifically for olympic recurve archers. The twisted ribbon design aids in immediate arrow rotation and the minimal surface area resulting from the cut-out profile provides a stable & accurate flight in variable, constant, and zero wind shooting scenarios. Weighing 1.2 grains the Griffin can be fletched with a standard Pro Class Style Jig using glue or tape.
The Griffin Vane is designed specifically for olympic recurve archers. The twisted ribbon design aids in immediate arrow rotation and the minimal surface area resulting from the cut-out profile provides a stable & accurate flight in variable, constant, and zero wind shooting scenarios. Weighing 1.2 grains the Griffin can be fletched with a standard Pro Class Style Jig using glue or tape.
The Griffin Vane is designed specifically for olympic recurve archers. The twisted ribbon design aids in immediate arrow rotation and the minimal surface area resulting from the cut-out profile provides a stable & accurate flight in variable, constant, and zero wind shooting scenarios. Weighing 1.2 grains the Griffin can be fletched with a standard Pro Class Style Jig using glue or tape.
This Arrow wrap is designed to complement Blazer vane by providing increased arrow visibility. Wraps are 4� long and 1.125� wide, each package contains 13 wraps.
This Arrow wrap is designed to complement Blazer vane by providing increased arrow visibility. Wraps are 4� long and 1.125� wide, each package contains 13 wraps.
This Arrow wrap is designed to complement Blazer vane by providing increased arrow visibility. Wraps are 4� long and 1.125� wide, each package contains 13 wraps.
This Arrow wrap is designed to complement Blazer vane by providing increased arrow visibility. Wraps are 4� long and 1.125� wide, each package contains 13 wraps.
Four inch wraps work great with Blazer vanes or other vanes 2� or less. For use on arrow shafts 19/64� diameter and smaller. Weight: 8.8 gr. 13 pk.
This Arrow wrap was designed to complement Blazer vane by providing increased arrow visibility. Wraps are 4" long and 1.125" wide, each package contains 13 wraps.
This Arrow wrap is designed to complement Blazer vane by providing increased arrow visibility. Wraps are 4� long and 1.125� wide, each package contains 13 wraps.
A low profile hunting vane that is constructed of a stiffer material. Great for any broadhead and 3D archery. 2.5� in length, 0.41� in height and they weigh 6 grains.
A low profile hunting vane that is constructed of a stiffer material. Great for any broadhead and 3D archery. 2.5� in length, 0.41� in height and they weigh 6 grains.
A low profile hunting vane that is constructed of a stiffer material. Great for any broadhead and 3D archery. 2.5� in length, 0.41� in height and they weigh 6 grains.
A low profile hunting vane that is constructed of a stiffer material. Great for any broadhead and 3D archery. 2.5� in length, 0.41� in height and they weigh 6 grains.
A low profile hunting vane that is constructed of a stiffer material. Great for any broadhead and 3D archery. 2.5� in length, 0.41� in height and they weigh 6 grains.
A low profile hunting vane that is constructed of a stiffer material. Great for any broadhead and 3D archery. 2.5� in length, 0.41� in height and they weigh 6 grains.
A low profile hunting vane that is constructed of a stiffer material. Great for any broadhead and 3D archery. 2.5� in length, 0.41� in height and they weigh 6 grains.
A low profile hunting vane that is constructed of a stiffer material. Great for any broadhead and 3D archery. 2.5� in length, 0.41� in height and they weigh 6 grains.
A low profile hunting vane that is constructed of a stiffer material. Great for any broadhead and 3D archery. 2.5� in length, 0.41� in height and they weigh 6 grains.
A low profile hunting vane that is constructed of a stiffer material. Great for any broadhead and 3D archery. 2.5� in length, 0.41� in height and they weigh 6 grains.
A low profile hunting vane that is constructed of a stiffer material. Great for any broadhead and 3D archery. 2.5� in length, 0.41� in height and they weigh 6 grains.
A low profile hunting vane that is constructed of a stiffer material. Great for any broadhead and 3D archery. 2.5� in length, 0.41� in height and they weigh 6 grains.
A low profile hunting vane that is constructed of a stiffer material. Great for any broadhead and 3D archery. 2.5� in length, 0.41� in height and they weigh 6 grains.
Bohning's Multi-Fletcher Jig includes 7 color-coded clamp inserts for different angles, from straight up to a 3 degree right or left helical. It works with all arrow diameters from X10s to 27s. The Multi-Fletcher can do a 3 or 4 fletch and will accommodate arrows with stand nocks or x-bow bolts. The rugged 16-gauge stainless steel base and durable composite clamps can be cleaned with acetone to remove adhesive residue. The unique snap-lock clamp plate with inserts provide superior adhesion force and consistent angles. Also includes a feather inserts, which is specifically designed to avoid damage to feathers. The stainless steel base can be screwed down to a work table as a single unit or as a multiple jig arrangement.
Fletching jig features a Quick-set magnetic clamp with larger clamp grips for easier operation, easy off-set adjustment, and accurate “snap� indexing.
Fletching jig features a Quick-set magnetic clamp with larger clamp grips for easier operation, easy off-set adjustment, and accurate “snap� indexing.
Shield cut vane designed for field and FITA style archery competition. Made from Blazer vane material for durability. Length: 1.75�, Profile: .375�, Weight: 3.5 gr.
Shield cut vane designed for field and FITA style archery competition. Made from Blazer vane material for durability. Length: 1.75�, Profile: .375�, Weight: 3.5 gr.
Shield cut vane designed for field and FITA style archery competition. Made from Blazer vane material for durability. Length: 1.75�, Profile: .375�, Weight: 3.5 gr.
Shield cut vane designed for field and FITA style archery competition. Made from Blazer vane material for durability. Length: 1.75�, Profile: .375�, Weight: 3.5 gr.
Shaft stripper features a contoured surgical steel blade for years of use, pre-formed channel to keep shaft properly positioned, and an easy-grip handle.
Bohning Strip-Pro easily removes fletchings, adhesive residue, and wraps from your arrows. It features a cutting angle that is safe for carbon, aluminum, and fiberglass shafts in all diameters. The handle opens for extra blade storage (extra blades not included).
Tower fletching jig allows you to fletch all 3 vanes at once with a 3 degree helical or 1 degree right offset. Designed for shafts up to .350� in diameter.
Vertical fletching jig accommodates all standard carbon, small diameter carbon, large diameter carbon, and aluminum shafts up to 23/64� O.D. Designed to work with arrows that have a press fit nock system. Places 3 vanes on a 3 degree right helical at 120 degrees apart and includes two pressure rings allowing you to apply the perfect amount of pressure on different diameter shafts. Jig will only work with vanes up to 2 inches in length.
Tower fletching jig allows you to fletch all three vanes at once. Includes 3 sets of arms - Straight (Up to 4� vane), 1 degree offset (Up to 4� vane), and 3 degree right helical (Up to 2.25� vanes). Center posts for standard carbon, F nock, A nock, HE nock, pin nock, and crossbow bolts are also included. Two different clamping rings accept any size arrow shaft.
This arrow wrap and vane combo set lets you custom your arrows to your liking. The wraps are a standard 4" length and are 1.125" wide and contains 13 wraps. Also included are 36 True Color Blazer vanes that match the arrow wrap for a total custom look that stands out.
Bohning X3 Vanes feature a shield cut ultra-stiff lower profile design. Designed for field and FITA archery. Lightweight for added spped and constructed of Heat Vane material. Weight: 4.4 gr. (1.75 in.), 5.8 gr. (2.25 in.). Height: .375 in. (1.75in.), .325 in. (2.25 in.).
Bohning X3 Vanes feature a shield cut ultra-stiff lower profile design. Designed for field and FITA archery. Lightweight for added spped and constructed of Heat Vane material. Weight: 4.4 gr. (1.75 in.), 5.8 gr. (2.25 in.). Height: .375 in. (1.75in.), .325 in. (2.25 in.).
Bohning X3 Vanes feature a shield cut ultra-stiff lower profile design. Designed for field and FITA archery. Lightweight for added spped and constructed of Heat Vane material. Weight: 4.4 gr. (1.75 in.), 5.8 gr. (2.25 in.). Height: .375 in. (1.75in.), .325 in. (2.25 in.).
Bohning X3 Vanes feature a shield cut ultra-stiff lower profile design. Designed for field and FITA archery. Lightweight for added spped and constructed of Heat Vane material. Weight: 4.4 gr. (1.75 in.), 5.8 gr. (2.25 in.). Height: .375 in. (1.75in.), .325 in. (2.25 in.).
Bohning X3 Vanes feature a shield cut ultra-stiff lower profile design. Designed for field and FITA archery. Lightweight for added spped and constructed of Heat Vane material. Weight: 4.4 gr. (1.75 in.), 5.8 gr. (2.25 in.). Height: .375 in. (1.75in.), .325 in. (2.25 in.).
Bohning X3 Vanes feature a shield cut ultra-stiff lower profile design. Designed for field and FITA archery. Lightweight for added spped and constructed of Heat Vane material. Weight: 4.4 gr. (1.75 in.), 5.8 gr. (2.25 in.). Height: .375 in. (1.75in.), .325 in. (2.25 in.).
Bohning X3 Vanes feature a shield cut ultra-stiff lower profile design. Designed for field and FITA archery. Lightweight for added spped and constructed of Heat Vane material. Weight: 4.4 gr. (1.75 in.), 5.8 gr. (2.25 in.). Height: .375 in. (1.75in.), .325 in. (2.25 in.).
Bohning X3 Vanes feature a shield cut ultra-stiff lower profile design. Designed for field and FITA archery. Lightweight for added spped and constructed of Heat Vane material. Weight: 4.4 gr. (1.75 in.), 5.8 gr. (2.25 in.). Height: .375 in. (1.75in.), .325 in. (2.25 in.).
Bohning X3 Vanes feature a shield cut ultra-stiff lower profile design. Designed for field and FITA archery. Lightweight for added spped and constructed of Heat Vane material. Weight: 4.4 gr. (1.75 in.), 5.8 gr. (2.25 in.). Height: .375 in. (1.75in.), .325 in. (2.25 in.).
Bohning X3 Vanes feature a shield cut ultra-stiff lower profile design. Designed for field and FITA archery. Lightweight for added spped and constructed of Heat Vane material. Weight: 4.4 gr. (1.75 in.), 5.8 gr. (2.25 in.). Height: .375 in. (1.75in.), .325 in. (2.25 in.).
Bohning X3 Vanes feature a shield cut ultra-stiff lower profile design. Designed for field and FITA archery. Lightweight for added spped and constructed of Heat Vane material. Weight: 4.4 gr. (1.75 in.), 5.8 gr. (2.25 in.). Height: .375 in. (1.75in.), .325 in. (2.25 in.).
Bohning X3 Vanes feature a shield cut ultra-stiff lower profile design. Designed for field and FITA archery. Lightweight for added spped and constructed of Heat Vane material. Weight: 4.4 gr. (1.75 in.), 5.8 gr. (2.25 in.). Height: .375 in. (1.75in.), .325 in. (2.25 in.).
Bohning X3 Vanes feature a shield cut ultra-stiff lower profile design. Designed for field and FITA archery. Lightweight for added spped and constructed of Heat Vane material. Weight: 4.4 gr. (1.75 in.), 5.8 gr. (2.25 in.). Height: .375 in. (1.75in.), .325 in. (2.25 in.).
Bohning X3 Vanes feature a shield cut ultra-stiff lower profile design. Designed for field and FITA archery. Lightweight for added spped and constructed of Heat Vane material. Weight: 4.4 gr. (1.75 in.), 5.8 gr. (2.25 in.). Height: .375 in. (1.75in.), .325 in. (2.25 in.).
Bohning X3 Vanes feature a shield cut ultra-stiff lower profile design. Designed for field and FITA archery. Lightweight for added spped and constructed of Heat Vane material. Weight: 4.4 gr. (1.75 in.), 5.8 gr. (2.25 in.). Height: .375 in. (1.75in.), .325 in. (2.25 in.).
Bohning X3 Vanes feature a shield cut ultra-stiff lower profile design. Designed for field and FITA archery. Lightweight for added spped and constructed of Heat Vane material. Weight: 4.4 gr. (1.75 in.), 5.8 gr. (2.25 in.). Height: .375 in. (1.75in.), .325 in. (2.25 in.).
Bohning X3 Vanes feature a shield cut ultra-stiff lower profile design. Designed for field and FITA archery. Lightweight for added spped and constructed of Heat Vane material. Weight: 4.4 gr. (1.75 in.), 5.8 gr. (2.25 in.). Height: .375 in. (1.75in.), .325 in. (2.25 in.).
Bohning X3 Vanes feature a shield cut ultra-stiff lower profile design. Designed for field and FITA archery. Lightweight for added spped and constructed of Heat Vane material. Weight: 4.4 gr. (1.75 in.), 5.8 gr. (2.25 in.). Height: .375 in. (1.75in.), .325 in. (2.25 in.).
Bohning X3 Vanes feature a shield cut ultra-stiff lower profile design. Designed for field and FITA archery. Lightweight for added spped and constructed of Heat Vane material. Weight: 4.4 gr. (1.75 in.), 5.8 gr. (2.25 in.). Height: .375 in. (1.75in.), .325 in. (2.25 in.).
The Zen vane is a low profile shield cut vane designed for indoor spot shooting. Solves clearance issues when using large diameter shafts. Length: 4”, Height: 0.37”, Weight: 12.5 grains.
The Zen vane is a low profile shield cut vane designed for indoor spot shooting. Solves clearance issues when using large diameter shafts. Length: 4�, Height: 0.37�, Weight: 12.5 grains.
The Zen vane is a low profile shield cut vane designed for indoor spot shooting. Solves clearance issues when using large diameter shafts. Length: 4�, Height: 0.37�, Weight: 12.5 grains.
The Zen vane is a low profile shield cut vane designed for indoor spot shooting. Solves clearance issues when using large diameter shafts. Length: 4�, Height: 0.37�, Weight: 12.5 grains.
The Zen vane is a low profile shield cut vane designed for indoor spot shooting. Solves clearance issues when using large diameter shafts. Length: 4�, Height: 0.37�, Weight: 12.5 grains.
The Zen vane is a low profile shield cut vane designed for indoor spot shooting. Solves clearance issues when using large diameter shafts. Length: 4�, Height: 0.37�, Weight: 12.5 grains.
The fletcher may be easily adjusted with the furnished wrench for 120 degree three fletch or 75 by 105 four fletch. Large easy-to-turn indexing knob with zero index position mark. Nock receiver may be rotated to any position for precise placement of your nock in relation to the fletching. It will even allow placement of the cock feather down if desired or allow adjustment for best fletching clearance on a particular bow. The clamp is graduated for easy fletching placement in relation to the nock.
Will fletch 3 fletch 120 degree,4 fletch 75X150 degree,60X120 degree and 90X90 degree, cock fletch up, down out or any angle desired. Head is degreed using a CNC milling which is accurate to one ten thousandth of an inch, for setting both the fletch and nock angles. Indexable upper shafts support is designed to hold each size shafts from 12/64 to 27/64. Hardened indexing contact points for non-wearing accuracy. No ball bearings.
Will fletch 3 fletch 120 degree,4 fletch 75X150 degree,60X120 degree and 90X90 degree, cock fletch up, down out or any angle desired. Head is degreed using a CNC milling which is accurate to one ten thousandth of an inch, for setting both the fletch and nock angles. Indexable upper shafts support is designed to hold each size shafts from 12/64 to 27/64. Hardened indexing contact points for non-wearing accuracy. No ball bearings.
Will fletch 3 fletch 120 degree,4 fletch 75X150 degree,60X120 degree and 90X90 degree, cock fletch up, down out or any angle desired. Head is degreed using a CNC milling which is accurate to one ten thousandth of an inch, for setting both the fletch and nock angles. Indexable upper shafts support is designed to hold each size shafts from 12/64 to 27/64. Hardened indexing contact points for non-wearing accuracy. No ball bearings.
Bully boat tail vanes feature an ultra-stiff design for high speed stability and Boat Tail shape for superior accuracy. Length: 2�, Height: .5�, Weight: 7 grains.
Bully boat tail vanes feature an ultra-stiff design for high speed stability and Boat Tail shape for superior accuracy. Length: 2”, Height: .5”, Weight: 7 grains.
Bully boat tail vanes feature an ultra-stiff design for high speed stability and Boat Tail shape for superior accuracy. Length: 2�, Height: .5�, Weight: 7 grains.
Bully boat tail vanes feature an ultra-stiff design for high speed stability and Boat Tail shape for superior accuracy. Length: 2”, Height: .5”, Weight: 7 grains.
Bully boat tail vanes feature an ultra-stiff design for high speed stability and Boat Tail shape for superior accuracy. Length: 2�, Height: .5�, Weight: 7 grains.
Height and profile designed for high powered crossbows. Stiffening ridge cuts flutter at high speeds and increases accuracy and tightens broadhead groups. They are 3" in length and have a .500" profile and weigh 10 grains.
Height and profile designed for high powered crossbows. Stiffening ridge cuts flutter at high speeds and increases accuracy and tightens broadhead groups. They are 3" in length and have a .500" profile and weigh 10 grains.
Height and profile designed for high powered crossbows. Stiffening ridge cuts flutter at high speeds and increases accuracy and tightens broadhead groups. They are 3" in length and have a .500" profile and weigh 10 grains.
Height and profile designed for high powered crossbows. Stiffening ridge cuts flutter at high speeds and increases accuracy and tightens broadhead groups. They are 3" in length and have a .500" profile and weigh 10 grains.
Height and profile designed for high powered crossbows. Stiffening ridge cuts flutter at high speeds and increases accuracy and tightens broadhead groups. They are 3" in length and have a .500" profile and weigh 10 grains.
