AAE
2 products
Axcel
35 products
Bee Stinger
9 products
Bow Jax
5 products
Bowfinger
1 products
CBE
2 products
Doinker
8 products
Easton
5 products
Last Chance
2 products
Last Chance Archery
1 products
Limbsaver
9 products
Mybo
3 products
Precision Balance
1 products
Stabilizer weights with 5/16�-24 thread.
|
Stabilizer weights with 5/16�-24 thread.
|
Adjustable vibration dampener system that allows you to adjust the strong proprietary rubber material will support up to 30oz weight max. By loosening the locking screw you twist the inner part of the dampener to set the tension to the amount of weights being used. The overall weight of the dampener is 2.7oz. When using 1-5oz weights loosen set screw rotate counter-clockwise all the way to stop position lock screw down, when using 5-10oz weights tighten clockwise 1 revolution to line 1 lock screw down, when using 10-30oz weights tighten clockwise 2 revolution line 2 lock screw down. Stock 5/16�-24 thread size.
|
Adjustable vibration dampener system that allows you to adjust the strong proprietary rubber material will support up to 30oz weight max. By loosening the locking screw you twist the inner part of the dampener to set the tension to the amount of weights being used. The overall weight of the dampener is 2.7oz. When using 1-5oz weights loosen set screw rotate counter-clockwise all the way to stop position lock screw down, when using 5-10oz weights tighten clockwise 1 revolution to line 1 lock screw down, when using 10-30oz weights tighten clockwise 2 revolution line 2 lock screw down. Stock 5/16�-24 thread size.
|
Adjustable vibration dampener system that allows you to adjust the strong proprietary rubber material will support up to 30oz weight max. By loosening the locking screw you twist the inner part of the dampener to set the tension to the amount of weights being used. The overall weight of the dampener is 2.7oz. When using 1-5oz weights loosen set screw rotate counter-clockwise all the way to stop position lock screw down, when using 5-10oz weights tighten clockwise 1 revolution to line 1 lock screw down, when using 10-30oz weights tighten clockwise 2 revolution line 2 lock screw down. Stock 5/16�-24 thread size.
|
Adjustable vibration dampener system that allows you to adjust the strong proprietary rubber material will support up to 30oz weight max. By loosening the locking screw you twist the inner part of the dampener to set the tension to the amount of weights being used. The overall weight of the dampener is 2.7oz. When using 1-5oz weights loosen set screw rotate counter-clockwise all the way to stop position lock screw down, when using 5-10oz weights tighten clockwise 1 revolution to line 1 lock screw down, when using 10-30oz weights tighten clockwise 2 revolution line 2 lock screw down. Stock 5/16�-24 thread size.
|
Aluminum Black end cap with logo for Axcel stabilizer.
|
Black weight for Axcel stabilizer.
|
Silver weight for Axcel stabilizer.
|
Black Nitride SST weight for Axcel stabilizer.
|
Stainless Steel weight for Axcel stabilizer.
|
Stainless Steel 3 pk weight for Axcel stabilizer.
|
1.25 in Black weight for Axcel stabilizer.
|
1.25 in Stainless weight for Axcel stabilizer.
|
Black Nitride SST weight for Axcel stabilizer.
|
Stainless Steel weight for Axcel stabilizer.
|
Stack Black Nitride SST weight for Axcel stabilizer.
|
Stack Stainless Steel weight for Axcel stabilizer.
|
Black Nitride SST weight for Axcel stabilizer.
|
Stainless Steel weight for Axcel stabilizer.
|
Black Nitride SST weight for Axcel stabilizer.
|
Stainless Steel weight for Axcel stabilizer.
|
Stainless Steel weight for Axcel stabilizer.
|
Black Nitride SST weight for Axcel stabilizer.
|
Stainless Steel weight for Axcel stabilizer.
|
Black Nitride SST weight for Axcel stabilizer.
|
Stainless Steel weight for Axcel stabilizer.
|
Ball Shape Black Nitride SST weight for Axcel stabilizer.
|
Ball Shape Stainless Steel weight for Axcel stabilizer.
|
Black Nitride SST weight for Axcel stabilizer.
|
Stainless Steel weight for Axcel stabilizer.
|
Black Nitride SST weight for Axcel stabilizer.
|
Stainless Steel weight for Axcel stabilizer.
|
Stainless Steel weight for Axcel stabilizer.
|
Stainless steel 1 oz. end weights for use on all B-Stinger bars. Matte black finish.
|
Single block stainless steel 4 oz. weight for use on all B-Stinger stabilizer bars.
|
Individual stack weights provide customized balance to any hunting or target bow.
|
This single block 8 oz. stainless steel end weight is designed for the archer who wants extra weight without having to stack multiple single weights on the bar. Maximum convenience, maximum balance and stability.
|
Individual stack weights provide customized balance to any hunting or target bow.
|
Stainless steel 1 oz. end weights for use on all B-Stinger bars. Polished finish.
|
Single block stainless steel 4 oz. weight for use on all B-Stinger stabilizer bars.
|
Dampener for B-Stinger Microhex series stabilizers.
|
End weights designed to meet the exacting standards of the world’s leading archers. Provides maximum balance and stability for your Bee Stinger Stabilizer system. Available in 2 oz. and 4 oz. Black.
|
Weight set for Bowfinger stabilizers. Includes one each of 1 oz., 2 oz., 3 oz., and 4 oz. weights. Makes it easy to adjust in 1 oz. increments. 5/16-24 threads.
|
Dampeners can be installed on a stabilizer to reduce vibration. Fits stabilizers with 5/8� -1� outside diameter. 2/pk.
|
Dampeners can be installed on a stabilizer to reduce vibration. Fits stabilizers with 5/8� -1� outside diameter. 2 pk.
|
Dampeners can be installed on a stabilizer to reduce vibration. Fits stabilizers with 5/8� -1� outside diameter. 2 pk.
|
4-arm dampener helps dampen noise and vibration for your stabilizer. The only stabilizer module designed that has 4 arms with balls at the end for maximum stability and control. 5/16" x 24 thread, weights 2.25 ounces.
|
Installs in seconds and easily slips over the end of the stabilizer. Improves accuracy and reduces vibration. Fits stabilizers with 3/4� outside diameter.
|
These soft elastomeric dampeners stretch over your stabilizer to help reduce vibration.
|
Black Nitride coated stainless steel weights. Mounting stud included.
|
Stainless steel weights with a black nitride coating to eliminate chipping. Mounting stud included.
|
Stabilizer end weight for use with any Doinker stabilizer that accepts 1/4”-20 threaded weights.
|
Stabilizer end weight system for use with any Doinker stabilizer that accepts 1/4”-20 threaded weights. Includes 1 oz., 2 oz., and 4 oz. weights with set screw kit.
|
Doinker 421 weight system includes (1) 4 ounce weight, (1) 2 ounce weight, (1) 1 ounce weight and 1/4-20 thread size screw pack.
|
Adapts from 1/4”-20 thread to 5/16”-24 thread.
|
Adjustable stack weights that are constructed of steel. Features 1/4-20 threads and weighs 5 oz. Standard on the Advancee series stabilizers.
|
Allows the archer to fully adjust the flex/tension of the Doinker to absorb residual vibration in the stabilizer. Fits between the 421 weight system. 1/4”-20 threads.
|
Allows the archer to fully adjust the flex/tension of the Doinker to absorb residual vibration in the stabilizer. Fits between stabilizer weights. 1/4”-20 threads.
|
Doinker 421 weight system includes (3) 4 ounce weights and (1) 3 oz weight. 1/4-20 thread size.
|
Flat Vari-Weights can be stacked to obtain a custom balance. For use on Easton stabilizers.
|
Flat Vari-Weights can be stacked to obtain a custom balance. For use on Easton stabilizers.
|
Flat Vari-Weights can be stacked to obtain a custom balance. For use on Easton stabilizers.
|
Used to adjust and customize stabilizer balance and flex.
|
This cap and stud is made just for holding your weights onto your stabilizers. The tungsten weights are not threaded, giving you the ability to easily take off, or add on, your tungsten weights with ease. You'll never again have to worry about getting stabilizer studs to align perfect with a large number of threaded steel weights. Hold up to 30oz. of weight using the 3" threaded stud included.
|
These weights are the same size overall as a standard 1oz. stainless steel weight but weigh 3oz. This gives you the ability to cut down on your weight length which then cuts down your overall stabilizer length as a whole. These weights are not threaded and require the weight cap and stud. The weights are sold individually.
|
Made from NAVCOM material with Broadband Technology to dampen a wide range of vibration frequencies. Screws onto the end of any stabilizer with 5/16�-24 thread mount.
|
Made from NAVCOM material with Broadband Technology to dampen a wide range of vibration frequencies. Screws onto the end of any stabilizer with 5/16�-24 thread mount.
|
The FW1 Stabilizer Enhancer Node utilizes double Broadband design to greatly reduce vibration and help your bow settle faster for a smoother shot. Can be used with any stabilizer that has a 5/16" thread mount. You can add as much weight as you want, weights sold seperately. Diameter: 1.65", weight: 1.6 oz.
|
Adds 5.6 oz. of weight to the front of your stabilizer to help keep your bow steady and eliminate vibration on the shot. Additional 5/16"-24 weights can be added for a customized feel. Includes (2) 1 oz. weights, additional weights sold separately.
|
The FW1 Stabilizer Enhancer Node utilizes double Broadband design to greatly reduce vibration and help your bow settle faster for a smoother shot. Can be used with any stabilizer that has a 5/16" thread mount. You can add as much weight as you want, weights sold seperately. Diameter: 1.65", weight: 1.6 oz.
|
Adds 5.6 oz. of weight to the front of your stabilizer to help keep your bow steady and eliminate vibration on the shot. Additional 5/16"-24 weights can be added for a customized feel. Includes (2) 1 oz. weights, additional weights sold separately.
|
The FW1 Stabilizer Enhancer Node utilizes double Broadband design to greatly reduce vibration and help your bow settle faster for a smoother shot. Can be used with any stabilizer that has a 5/16" thread mount. You can add as much weight as you want, weights sold seperately. Diameter: 1.65", weight: 1.6 oz.
|
The FW1 Stabilizer Enhancer Node utilizes double Broadband design to greatly reduce vibration and help your bow settle faster for a smoother shot. Can be used with any stabilizer that has a 5/16" thread mount. You can add as much weight as you want, weights sold seperately. Diameter: 1.65", weight: 1.6 oz.
|
Boosts performance by minimizing vibration in the stabilizer. Designed to be easily movable on the stabilizer to aid in tuning.
|
Attaches to the threaded hole at the end of a hunting stabilizer to significantly reduce shock and vibration. Also works as a stabilizer end cap.
|
Slimline sold steel stabilizer weights.
|
Slimline sold steel stabilizer weights.
|
Slimline sold steel stabilizer weights.
|
Stainless steel stabilizer weight featuring a black cerakote finish and 5/16-24 threads.
|