Since 1998, eders.com has offered the largest selection archery and hunting equipment at the best prices. For even more savings on Archery and BowHunting Supplies, Join our Professional Bowhunter Buyer's Club, membership is NOW FREE for all.
Get Free Standard Shipping on all orders over $100.00. Just type: freeshipping in the coupon field during checkout.
Ensures broadhead sharpness by supporting ferrules without contacting blades. Holds 6 mechanical or fixed-blade broadheads in a durable ABS body. Compatible with most Deep Six and standard broadheads.
Designed and made by crossbow hunters, TRAIL BLAZER broadhead replacement blades feature .040”thick blades that open up to a massive 2” cutting diameter. Made in the USA
Make sure the blades of the Deadmeat broadhead stay in place and are held there until they need to deploy, not before. Collars are recommended to be replaced after use to maximize blade retention.
Make sure the blades of the Deadmeat broadhead stay in place and are held there until they need to deploy, not before. Collars are recommended to be replaced after use to maximize blade retention.
Ballistic Matched Point (BMP) is a practice head designed to have the same aerodynamics as the Mega Meat broadhead but be much more target friendly. Three heads per pack.
Ballistic Matched Point (BMP) is a practice head designed to have the same aerodynamics as the Mega Meat broadhead but be much more target friendly. Three heads per pack.
The giant blades expand to a 2 inch cutting diameter resulting in heaving blood loss. The MegaMeat features 3 razor sharp blades and an easy to use snaplock collar. The blades and collars are replaceable.
The giant blades expand to a 2 inch cutting diameter resulting in heaving blood loss. The MegaMeat features 3 razor sharp blades and an easy to use snaplock collar. The blades and collars are replaceable.
The Montec M3 broadhead offers all-steel construction with 100% spin-tested accuracy. The stronger steel blades with a non-vented design provide a sharper edge with quieter arrow flight and a 1.125" cutting diameter'
Confidently apply the proper amount of pressure to your broadheads with the Torkee from G5. The Torkee wrench can apply up to 7 inch pounds of pressure when tightening broadheads down on arrows and bolts. Two visible tabs are twisted together to show the user when the correct torque has been applied to the broadhead.
The Practice Head is the identical configuration of the Grim Reaper mechanical line of heads. In testing it was found to fly and impact the same as the actual broadheads, and will hold up long term to use on broadhead type targets.
The Practice Head is the identical configuration of the Grim Reaper mechanical line of heads. In testing it was found to fly and impact the same as the actual broadheads, and will hold up long term to use on broadhead type targets.
The K’Netix Convergence Broadhead Wrench and Sharpener is designed for both mechanical and fixed blade broadheads. The Convergence combines a carbide sharpener with a broadhead wrench along with nock tuning slots for a 3 in 1 tool.
The K’Netix MV2 Broadhead Wrench and Sharpener is designed for both mechanical and fixed blade broadheads. The MV2 combines a carbide sharpener with a broadhead wrench along with nock tuning slots for a 3 in 1 tool.
Offers safe storage and transport for 16 broadheads. Holds both expandable and fixed-blade, keeping them sharp and ready for the next hunt. Made of high-impact plastic, with strong snap latch and a full length, mechanical hinge.
Mechanical broadhead case features a silent rattle free padded interior. Small enough to fit in a backpack or pants pocket. Holds 6 mechanical broadheads.
The Muzzy Broadhead and Accessory Case is a handy carrying case made specifically to hold your Muzzy broadheads. The Muzzy Case is a zippered EVA molded case and is designed to hold up to six Muzzy broadheads. The foam insert on the inside of the Muzzy Case holds the heads in place and is blade friendly. A compact case that easily fits in a fanny pack or pocket.
The Rage Broadhead and Accessory Case is a handy carrying case made specifically to hold your Rage broadheads and tubes of SHOCK Collars. The Rage Case is a zippered EVA molded case and is designed to hold up to six 2-blade or 3-blade Rage broadheads and two plastic SHOCK Collar tubes. A compact case that easily fits in a fanny pack or pocket
Ravin’s Broadhead Case locks broadheads in place with magnets to help them stay sharp and prevent unwanted deployment. This compact case fits in the palm of your hand and is double sided with durable covers that latch securely.
The Redi-Edge Broadhead Holder is a tool that we created to make sharpening your broadheads safer and easier. All you have to do is attach your broadhead to the threaded end of the holder and draw the broadhead through the sharpener.
Sharpening a mechanical broadhead requires a harder material than the material you are trying to sharpen. The curved handle gives you a sturdy grip while you use the Duromite cutters to put the perfect edge on your mechanical broadheads every time. The Redi-Edge Mechanical Broadhead Sharpener's Duromite cutter blades are factory-set at a 30 degree inclusive angle, maintaining a consistent 15 degree double edge on your broadheads.
The thumb insert gives you a sturdy grip while you use the Duromite cutters to put the perfect edge on your snuffer broadheads every time. The Redi-Edge Snuffer Broadhead Sharpener's Duromite cutter blades are factory-set at a 62 degree inclusive angle, maintaining a consistent 31 degree double edge on your broadheads.
FliteLoc clip allows bowhunters to practice or hunt with broadhead and reuse by replacing the patented FliteLoc clip guarantees broadhead will deploy on impact.
Lighter and 2.8x stronger than the competition’s cases, Watertight and dustproof, Meets Military Standards and manufactured to withstand the toughest conditions, Resistant to impact damage, UV, solvents, corrosion, and fungus, Lifetime Warranty, 100% Made in the USA and fully warranted for the life of the case to the original owner. Layered foam interior measuring 7" x 2" 1"
Waterproof broadhead case designed to hold 9 broadheads and offers a compartment for tools or additional accessories. Internal measurements: 7.5”x5”x3.25”. External measurements: 8.4”x6.7”x3.8”.
The HDX3 is a multi-sharpener, dual angle sharpening system designed for use with razor blades, broadheads, and knives. Features two broadhead tip tighteners.
Replacement blade kit for the Levi Morgan Blade Lock 100 grain hybrid broad head model #261. Kit includes 6 expandable blades, shrink bands, and Allen wrench.
The Thorn Archery Multi Tool is designed for the Thorn Broadhead. The Multi Tool will cut your sheer pin, remove debris inside the ferrule of the Thorn Broadhead, remove Practice Clip, and will easily attach to a key chain.
Make your Thorn Broadheads safe to use with any Foam Target. The Thorn Archery Practice Clip prevents the Butcher Blades from deploying. Place Practice Clip clips underneath the Rip Tip and it will secure it from deploying. 3pk.
