Since 1998, eders.com has offered the largest selection archery and hunting equipment at the best prices. For even more savings on Archery and BowHunting Supplies, Join our Professional Bowhunter Buyer's Club, membership is NOW FREE for all.
Get Free Standard Shipping on all orders over $100.00. Just type: freeshipping in the coupon field during checkout.
The ProTac Rail Mount 1 is a compact tactical light for use on long guns with Picatinny rails. This powerful light features a 12,000 candela beam that reaches out to 240 yards for long-range illumination. It can be used with either a standard push button tail cap or the included remote switch. This light is capable or using lithium or alkaline batteries (alkaline at reduced output).
This 625 lumen light gives users the choice of three selectable programs for various lighting needs. It features a dedicated mount for Picatinny rails and uses either a remote switch with momentary/constant on operation or a standard push-button tail switch. This light uses durable, anodized aluminum construction with an impact-resistant tempered glass lens.
The ProTac Rail Mount HL-X is a 1,000 lumen weapon-mounted light featuring a dedicated fixed-mount for Picatinny rails. This light uses either a remote switch or a standard push-button tail switch. Three different modes allow for high, low, and strobe modes. The HL-X is powered by two CR123A batteries or one Streamlight SL-B26 USB rechargeable battery pack.
The TL-Racker replaces the forend on your shotgun for positive identification of targets and enhanced safety. The light delivers 1,000 lumens of bright white light with a concentrated beam and peripheral ring to help maintain situational awareness while illuminating your target. Integrated pressure pads on both sides of the forend enable easy access for left and right-handed users to switch between momentary and constant-on activation modes. The forend is made from an impact-resistant nylon polymer with a deeply ribbed textured grip for secure handling. This light is IPX7 waterproof, allowing submersion up to 1m of water for 30 minutes.Compatible with 12 gauge 7-3/4" Action slide 500 & 590 series.
The TL-Racker replaces the forend on your shotgun for positive identification of targets and enhanced safety. The light delivers 1,000 lumens of bright white light with a concentrated beam and peripheral ring to help maintain situational awareness while illuminating your target. Integrated pressure pads on both sides of the forend enable easy access for left and right-handed users to switch between momentary and constant-on activation modes. The forend is made from an impact-resistant nylon polymer with a deeply ribbed textured grip for secure handling. This light is IPX7 waterproof, allowing submersion up to 1m of water for 30 minutes.
The TL-Racker replaces the forend on your shotgun for positive identification of targets and enhanced safety. The light delivers 1,000 lumens of bright white light with a concentrated beam and peripheral ring to help maintain situational awareness while illuminating your target. Integrated pressure pads on both sides of the forend enable easy access for left and right-handed users to switch between momentary and constant-on activation modes. The forend is made from an impact-resistant nylon polymer with a deeply ribbed textured grip for secure handling. This light is IPX7 waterproof, allowing submersion up to 1m of water for 30 minutes.Compatible with most 12 gauge 870s except the Remington 870 Express Supermag.
The TLR-10 with integrated red laser includes ambidextrous switches with either low or high position to match your shooting style. This light produces a concentrated beam with optimum peripheral illumination for increased situational awareness. The rail clamp system is designed for easy attachment to full frame weapons and requires no tools. This light is made with a durable, anodized aluminum and is IPX4 water-resistant.
The TLR RM 1 Laser features independently operating push-button and remote pressure switches. This model uses a built-in ergonomic push button for activation. Continued pressure on the push-button provides momentary-on activation, a tap of the button puts the light in constant-on mode. A mode selector toggle switch transitions from laser only, light only, or light/laser combo modes. This light securely attaches to long guns with MIL-STD 1913/ Picatinny rails. The TLR RM 1 is powered by one CR123A battery and is IPX4 water-resistant. Includes key kit.
The TLR RM 1 Laser features independently operating push-button and remote pressure switches. Continued pressure on the pressure switch provides momentary-on activation, a tap of the switch puts the light in constant-on mode. A mode selector toggle switch transitions from laser only, light only, or light/laser combo modes. This light securely attaches to long guns with MIL-STD 1913/ Picatinny rails. Packaged as a complete package, this model includes a remote pressure switch and key kit. The TLR RM 1 is powered by one CR123A battery and is IPX4 water-resistant.
The TLR RM 2 Laser features independently operating push-button and remote pressure switches. This model uses a built-in ergonomic push button for activation. Continued pressure on the push-button provides momentary-on activation, a tap of the button puts the light in constant-on mode. A mode selector toggle switch transitions from laser only, light only, or light/laser combo modes. This light securely attaches to long guns with MIL-STD 1913/ Picatinny rails. The TLR RM 2 is powered by one CR123A battery and is IPX4 water-resistant. Includes key kit.
The TLR RM 2 Laser features independently operating push-button and remote pressure switches. Continued pressure on the pressure switch provides momentary-on activation, a tap of the switch puts the light in constant-on mode. A mode selector toggle switch transitions from laser only, light only, or light/laser combo modes. This light securely attaches to long guns with MIL-STD 1913/ Picatinny rails. Packaged as a complete package, this model includes a remote pressure switch and key kit. The TLR RM 2 is powered by one CR123A battery and is IPX4 water-resistant.
The TLR-1 HL delivers a 1,000 lumen beam of light for maximum illumination. A wide pattern illuminates large areas to light rooms and outdoor spaces. This light attaches and detaches to Glock-style and Picatinny rails without the need of tools or unsafe hand placement. Includes keys for Glock-style, Picatinny, Beretta 92, S&W 99 & TSW, and Sig P320. Ambidextrous momentary on/off switches make manipulation easy for all users. This light also features a programmable strobe for a variety of needs. The TLR-1 HL is powered by two CR123A batteries that provide up to 1.5 hours of use.Long Gun Kit includes a remote pressure switch and mounting clips.
The TLR-1 HL delivers a 1,000 lumen beam of light for maximum illumination. A wide pattern illuminates large areas to light rooms and outdoor spaces. This light attaches and detaches to Glock-style and Picatinny rails without the need of tools or unsafe hand placement. Includes keys for Glock-style, Picatinny, Beretta 92, S&W 99 & TSW, and Sig P320. Ambidextrous momentary on/off switches make manipulation easy for all users. This light also features a programmable strobe for a variety of needs. The TLR-1 HL is powered by two CR123A batteries that provide up to 1.5 hours of use.
The TLR-1 HL delivers a 1,000 lumen beam of light for maximum illumination. A wide pattern illuminates large areas to light rooms and outdoor spaces. This light attaches and detaches to Glock-style and Picatinny rails without the need of tools or unsafe hand placement. Includes keys for Glock-style, Picatinny, Beretta 92, S&W 99 & TSW, and Sig P320. Ambidextrous momentary on/off switches make manipulation easy for all users. This light also features a programmable strobe for a variety of needs. The TLR-1 HL is powered by two CR123A batteries that provide up to 1.5 hours of use.
The rail-mounted TLR-1 HPL produces a wide, 1,000 lumen beam pattern with brighter peripheral illumination and superior down–range performance. Mounts directly to all Picatinny rails and weapons with Glock-style rails. The deep dish parabolic reflector produces a long-range beam with optimum peripheral illumination. Durable anodized aluminum constriction, scratch-resistant coatings and waterproofing to 1m for 30 minutes make the TLR-1 HPL a durable and powerful light.
The TLR-6 is designed for secure attachment to select subcompact handguns. This model features a red laser with three different modes for activating the LED and laser independently or together. Push-button switches on both sides provide easy operation for left or right-handed users. The TLR-6 is made from an impact-resistant polymer and is impact tested up to 1m.
The TLR-6 is designed for secure attachment to select subcompact handguns. This model features push-button switches on both sides to provide easy operation for left or right-handed users. The TLR-6 is made from an impact-resistant polymer and is impact tested up to 1m.
The TLR-6 is designed for secure attachment to select subcompact handguns. This model features a red laser with three different modes for activating the LED and laser independently or together. Push-button switches on both sides provide easy operation for left or right-handed users. The TLR-6 is made from an impact-resistant polymer and is impact tested up to 1m.
The TLR-6 is designed for secure attachment to select subcompact handguns. This model features push-button switches on both sides to provide easy operation for left or right-handed users. The TLR-6 is made from an impact-resistant polymer and is impact tested up to 1m.
The TLR-7A includes ergonomic switches with low and high positions to match your shooting style. This light is an optimal fit for a wide variety of both full-sized and compact guns. The low-profile design prevents snagging and a “safe off� feature prevents accidental activation. The rail grip clamp system securely attaches/detaches without the use of tools or unsafe hand placement. IPX7 waterproof to 1m for 30 minutes and built with durable, anodized machined aluminum housing.
The TLR-7 Sub weapon light is designed specifically for attachment on select subcompact handguns. Includes an ambidextrous rear switch for activation with a strobe function. A safe off feature prevents accidental activation of the light. This item is IPX7 waterproof rated to 1m for 30 minutes.
The TLR-7 Sub weapon light is designed specifically for attachment on select subcompact handguns. Includes an ambidextrous rear switch for activation and a strobe function. A safe-off feature prevents accidental activation of the light. This item is IPX7 waterproof rated to 1m for 30 minutes. This model fits select 1913 short-railed subcompact handguns, including the M&P 2.0 subcompact, Beretta PX4 Storm Compact/Subcompacts, Springfield XD-E, Sprinfield XD-S, and the H&K HK 45.
The TLR-7 Sub weapon light is designed specifically for attachment on select subcompact handguns. Includes an ambidextrous rear switch for activation with a strobe function. A saf- off feature prevents accidental activation of the light. This item is IPX7 waterproof rated to 1m for 30 minutes.
The TLR-7 Sub weapon light is designed specifically for attachment on select subcompact handguns. Includes an ambidextrous rear switch for activation with a strobe function. A saf- off feature prevents accidental activation of the light. This item is IPX7 waterproof rated to 1m for 30 minutes.
The TLR-9 includes ergonomic switches with low and high positions to match your shooting style. This light is an optimal fit for a wide variety of full-sized handguns. The low-profile design prevents snagging and a “safe off� feature prevents accidental activation. The rail grip clamp system securely attaches/detaches without the use of tools or unsafe hand placement. IPX7 waterproof to 1m for 30 minutes and built with durable, anodized machined aluminum housing.
The TLR RM1 features independently operating push-button and remote pressure switches designed for use with long guns. The LED produces 500 lumens of light with 1.5 hours of runtime; 3 hours on strobe. The safe off feature prevents accidental activation, saving battery life and preventing unwanted illumination. This light securely attaches to long guns with Mil-Std Picatinny rails. This package includes the remote pressure switch kit and key kit. IPX7 waterproof to 1m for 30 minutes.
The TLR RM2 features a 1,000 lumens white LED to provide a bright picture. Features independently operating push-button and remote pressure switches designed for use with long guns. The safe off feature prevents accidental activation, saving battery life and preventing unwanted illumination. This light securely attaches to long guns with Mil-Std Picatinny rails. This package includes the remote pressure switch kit and key kit. IPX4 water-resistant.
The Wedge is a compact EDC light perfect for pocket carry. A rotating thumb switch provides control over the constant-on and THRO modes. This light is made of anodized aluminum with a tempered glass lens. A waterproof USB-C port charges the lithium polymer battery in 3 hours.
