Printable version

Since 1998, eders.com has offered the largest selection archery and hunting equipment at the best prices. For even more savings on Archery and BowHunting Supplies, Join our Professional Bowhunter Buyer's Club, membership is NOW FREE for all.

Get Free Standard Shipping on all orders over $200.00. Just type: freeshipping in the coupon field during checkout.


Weaver

Products


  • Weaver Aluminum Top Mount 61-S

    Anschutz -
    Rear Mount: 1568.
    Churchill -
    Rear Mount: 590 and 590-C.
    Knight Muzzleloaders -
    Rear Mount: Knight MK-85, BK-92, and T-Bolt (flat receivers).
    Front Mount: Knight MK-85, BK-92, and T-Bolt (flat receivers).
    Ithaca -
    Rear Mount: LSA-55 and LSA-65.
    Front Mount: LSA-55 and LSA-65.
    Sako -
    Rear Mount: Whitetail Hunter.
    Front Mount: Whitetail Hunter.
    Savage -
    Rear Mount: 10, 12, and 16 (short actions). Striker, Pstl , 510, 512, 516 S/ A, 10 ML (2-piece only) pre-2003 models, 110, 112, 116 (long actions); 210 Shtg (use X-high rings) pre-2003 models.
    Front Mount: 10, 12, and 16 (short actions). Striker, Pstl, 510, 512, 516 S/ A, 10 ML (2-piece only) pre-2003 models, 110, 112, 116 (long actions); 210 Shtg (use X-high rings) pre-2003 models.
    Note: For shorter tube scopes or red dot scopes use #402 extension front base or one-piece base if available. Extension base allows an extra 0.689".
    Shlien -
    Rear Mount: Flat Top Receiver.
    Front Mount: Flat Top Receiver.
    Stevens -
    Rear Mount: 110E.
    Tikka -
    Rear Mount: Tikka with Flat Receiver.
    Front Mount: Tikka with Flat Receiver.
    609895
    $4.39
    $5.44 save 19%
  • Weaver Aluminum Top Mount Black Browing/Beretta/Win #46S

    Anschutz: 1568.
    Browning: Bolt Action BBR, Hi-Power, other select calibers, older models, long and short actions.
    Churchill: 950/950-C, 972-C.
    Cooey: 71.
    Colt: 57.
    Enfield: with receiver cut down like a Winchester 70.
    H&R: 300, 301, 330, 370.
    Herters: J9.
    Musgrave: Mark III/IV.
    Marlin: 455, MR7.
    Mauser: Receiver Ring with 1.410" diameter (98FN).
    Navy Arms: Country Boy Muzzleloader
    Sears: 50, 51, 53.
    Parker Hale: 1000, 1000C, 1100, 1200, 1700.
    Savage: Axis Series short actions, 10, 12, 16.
    Striker Pistols: 510, 512, 516 S/A, 2-piece pre-2003 models 10 ML, long actions 110, 112, 116, pre-2003 model 210 Shotgun, long action Accutriggger 10, 12, 110, 112, 10 ML II.
    Stevens: 110E, 200.
    Weatherby: FN Mauser-style actions.
    Winchester: 52, 70 long action, 670, 770, 70 long action, 70 Super Express, post-1984 70 short action, 70 WSM.
    Voere: 2150, 2165/1, 2165/2, 2165/3, 2165/4, Mauser action, 45, 46.
    609865
    $3.30
    $4.10 save 20%
  • Weaver Aluminum Top Mount Black Browning #28

    Rear Base for: Browning BLR with flat top receiver (older models). BSA other high powers. Marlin 39A, 39D, and Century (octagon barrel). Herters U9, BSA Action. Voere 2130.
    Front Base for: Browning BLR with flat top receiver (older models). BSA other high powers. Herters U9, BSA Action. Voere 2130.
    608159
    $3.83
    $4.75 save 19%
  • Weaver Aluminum Top Mount Black Marlin 455/MR7/402

    Rear Extension Base for:
    Navy Arms Country Boy Muzzleloader.
    Savage Axis Series, 10, 12, 16 (short actions); Striker; Pistol; 510, 512, 516 S/A, 10 ML (2-piece only) pre-2003 models; 10, 12, 110, 112 (all long action AccuTriggers); 10, 12, 110, 112 (all short action AccuTriggers); 10 ML II.
    Stevens Savage/Stevens 200.

    Front Extension Base for:
    Anschutz 1568.
    Browning Bolt Action BBR, Hi-Power, other calibers (older models), BBR (Bolt Action), long and short actions.
    Churchill 950, 950-C, 972-C.
    Marlin 455, MR7.
    Mauser 1.4" diameter receiver ring (98FN), 1.3" diameter receiver ring (Swedish 96), Bauer 3000, 4000.
    Musgrave Mark I, Mark II, Mark III, Mark IV.
    Navy Arms Country Boy Muzzleloader.
    Parker-Hale 1000, 1000C, 1100, 1200, 1700.
    Colt 57.
    Cooey 71.
    Enfield Winchester 70.
    H&R 300, 301, 330, 370 (pre-1973); 300, 301 L.A. in 270, 30-06, 7mm, 300 Win (1973+).
    Herters J9.
    High-Standard High-Power.
    Interarms Viscount.
    Savage Axis Series, 10, 12, 16 (short actions); Striker; Pistol; 510, 512, 516 S/A, 10 ML (2-piece only) pre-2003 models; 110, 112, 116 (long actions); 210 Shtg (use X-high rings ) pre-2003 models; 10, 12, 110, 112 (all long action AccuTrigger); 10, 12, 110, 112 (all short action AccuTrigger); 10 ML II.
    Schultz & Larsen.
    Sears 50, 51, 51L, 53.
    Smith & Wesson Mauser Actions with small rectangular ring with 1.3" diameter.
    Stevens 110E, Savage/Stevens 200.
    Voere 2150, 2165/1, 2165/2, 2165/3 & 2165/4 (Mauser Action).
    Weatherby FN Mauser style actions.
    Winchester 52 with the same hole spacing; Lever Actions 53, 55, 64, 65, 66, 71, 1886, 1892, 95, 1895, 54, and early models; 70 with serial number below #66 350; 70 Long Action with the same hole spacing; 670, 770, 70 Long Action with different hole spacing, 70 Super Express, 70 Short Action (1984+), 70 Long Action with different hole spacing, 70 Super Express, 70 Short Action (1984+), 70 WSM.
    Notes
    For the Mauser 1.4" diameter receiver ring (98FN), 1.3" diameter receiver ring (Swedish 96), and Bauer 3000 and 4000 shimming is probably required for perfect scope alignment. The rear base may require modifications for a correct fit to military actions.
    Savage 110, 112, 116 (long actions); 210 Shtg (use X-high rings) pre-2003 models, 10, 12 & 16 (short actions); Striker, Pistol, 510, 512, 516 S/A, 10 ML (2-piece only) pre-2003 models, 10, 12, 110, 112 (all long action AccuTrigger), 10, 12, 110, 112 (all short action AccuTrigger), 10 ML II, Stevens, Savage/Stevens 200 or shorter tube scopes or red dot scopes use #402 extension front base or one-piece base if available. Extension base allows an extra 0.689".
    The Winchester 52 with the same hole spacing may require bolt and/or safety alterations, otherwise firearm cannot function safely and properly. Consult with a qualified gunsmith. For the Winchester 52 and Winchester 70 Long Action Rifles, check the spacing of the tapped holes for the rear base and compare it to the hole spacing for the front base. For the same hole spacing, Model 70, use 47+ 46.
    The Winchester Lever Actions 53, 55, 64, 65, 66, 71, 1886, 1892, 95, and 1895 will have to be drilled and tapped.
    The Winchester 54, early Models, and 70 with serial numbers below #66 350 may require bolt and/or safety alterations or the firearm will not function safely and properly. Consult with a qualified gunsmith.
    For the Winchester 70 Long Action with the same hole spacing, 670, 770, 70 Long Action, 70 Long Action with different hole spacing, 70 Super Express with different hole spacing, and 70 Super Express the handiest way to pinpoint the correct base for the Winchester 52 & 70 Long Action Rifles is to check the spacing of the tapped holes for the rear base and compare it to the hole spacing for the front base. If the hole spacing is the same, then use 46+ 46 for Model 52 and use 47+ 46 for Model 70. If the hole spacing is different, use 25+ 57 for Model 52 and 49A+ 46 for Model 70.
    712013
    $5.70
    $7.07 save 19%

    OUT OF STOCK

  • Weaver Aluminum Top Mount Black Remington/Ruger/Weatherby #35S

    Beretta: Rear Mount – Pintail slug gun, Front Mount – pintail slug gun.
    BSA: Front Mount – Monarch Medium Action in 222, 243, and 308, CF2, Monarch Long Action in 7mm, 270, and 30-06.
    Churchill: Front Mount – Highlander.
    Colt: Rear Mount – Sauer, Front Mount – Sauer.
    Enfield: Front Mount – With receiver cut down like Remington 721.
    Herters: Front Mount – U9 Round Receiver.
    Howa: Front Mount – Howa.
    Mossberg: Front Mount – 100 ATR, 1500, 1700.
    Raptor Arms: Front Mount – Same as Remington 700 Long Action.
    Remington: Front Mount – 700, 78, 40x-L, 721, 725 (all long actions), 700, 78, 40x-S, 722, 725 (all short actions), 700 muzzleloader.
    Sauer: Rear Mount – Round Receiver, Front Mount – Round Receiver.
    Shilen: Rear Mount – Round Receiver, Front Mount – Round Receiver.
    Smith & Wesson: Front Mount – 1500, 1600, and 1700.
    Weatherby: Front Mount – Vanguard.
    609691
    $3.53
    $4.38 save 19%
  • Weaver Aluminum Top Mount Black S&W

    Smith & Wesson 29, 629, 625, 686 L, K, and N Frame revolvers (factory drilled). Taurus L, K, and N Frame revolvers (factory drilled).

    Note: Remove rear sight to use. Must be factory drilled and tapped. Not for use with X-frame revolvers. Use on firearms under than those listed may cause injury.
    609970
    $14.24
    $16.95 save 16%

    OUT OF STOCK

  • Weaver Aluminum Top Mount Black Win 70 SA #99

    An aluminum base for the Winchester 70 Short Action (1984+). Machined to tight tolerances for a custom fit.
    609858
    $17.21
    $20.49 save 16%
  • Weaver Aluminum Top Mount Black Win 70/670/770 #96

    One-piece base for Winchester 70 Long Action (same hole spacing) 670 and 770. Made of aluminum with tight tolerances. Note: The handiest way to pinpoint the correct base for the Winchester 52 & Winchester 70 Long Action Rifles is to check the spacing of the tapped holes for the rear base and compare it to the hole spacing for the front base. For hole spacing the same, Model 70, use 47+ 46.
    609852
    $20.06
    $23.59 save 15%
  • Weaver Aluminum Top Mount Black Winchester 1200/1500/416M

    A one-piece aluminum base for Winchester 1200, 1300, 1400, and 1500 shotguns.
    608394
    $10.57
    $12.90 save 18%
  • Weaver AR Flat Top Riser Rail Matte

    A lightweight 6061-T6 aluminum raiser for solid support and a type III hard anodized finish that is corrosion and abrasion resistant. Fits flat-top AR-15 platforms. Has a 20 MOA canting.
    715842
    $84.32
    $98.71 save 15%
  • Weaver Detachable Extension Top Mount Matte 1 in. Ring High

    This pair of rings is compatible with 1� maintubes and can be mounted on Weaver-style rails. The extension on one ring allows users to adjust the mounting positon of the optic forward or backward to achieve an optimal eye relief. The saddle is made of weight-reducing aluminum while the strap is crafted from steel.
    610242
    $30.67
    $37.32 save 18%

    OUT OF STOCK

  • Weaver Grand Slam Steel Scope Rings Matte Black 30mm

    Grand Slam Rings feature an integrated square recoil lug for superior ring-to-base contact offering maximum recoil resistance to give you the ultimate hold on your scope
    1405919
    $35.10
    $42.71 save 18%
  • Weaver Grand Slam Steel Scope Rings Matte Black 30mm

    Grand Slam Rings feature an integrated square recoil lug for superior ring-to-base contact offering maximum recoil resistance to give you the ultimate hold on your scope
    1405920
    $35.10
    $42.71 save 18%

    OUT OF STOCK

  • Weaver Grand Slam Top Mount Scope Rings Matte 1in. High Weaver

    These Weaver Grand Slam rings are made with maximum strength solid steel to withstand harsh conditions. These two rings are tightly secured with the cross-lock design.
    704593
    $35.10
    $42.71 save 18%
  • Weaver Grand Slam Top Mount Scope Rings Matte 1in. Medium Weaver

    These Weaver Grand Slam rings are made with maximum strength solid steel to withstand harsh conditions. These two rings are tightly secured with the cross-lock design.
    704591
    $35.10
    $42.71 save 18%

    OUT OF STOCK

  • Weaver Picatinny Riser Set

    This two-piece set features an extra slot and an additional 1/2� rise for your optic or other device. It is made from 6061-T6 aluminum alloy with a corrosion and abrasion-resistant Type III hard anodized finish.
    705371
    $61.82
    $72.37 save 15%

    OUT OF STOCK

  • Weaver Quad Lock Top Mount Scope Rings Matte 1in. High Weaver

    These matte black rings are made with an extremely light aircraft-grade aluminum. One thumbscrew on each of the rings attaches the scope to your rifle, allowing easy mounting and removal. Each ring tightly fastens the scope with 2 straps and 4 screws, maximizing recoil resistance. 1" tube diameter.
    706237
    $14.93
    $17.78 save 16%

    OUT OF STOCK

  • Weaver Quad Lock Top Mount Scope Rings Matte 1in. Medium Weaver

    These matte black rings are made with an extremely light aircraft-grade aluminum. One thumbscrew on each of the rings attaches the scope to your rifle, allowing easy mounting and removal. Each ring tightly fastens the scope with 2 straps and 4 screws, maximizing recoil resistance. 1" tube diameter.
    706236
    $14.93
    $17.78 save 16%
  • Weaver See-Thru Top Mount Scope Rings Matte 1in.

    These 1� rings mount and unmount to your riflescope with 2 thumb nuts. These 2 rings allow you to choose between the iron sight for close shots or the scope for distance.
    609390
    $28.53
    $33.55 save 15%
  • Weaver SeeThru Steel Lock Scope Ring/Mount Black 1 in. Remington7400/7600

    These rings mount directly onto a .Remington 7400/7600, affixing a riflescope with two straps and four screws, for each of the two rings, without the need of a base. These allow you to choose between iron sights or the scope. These rings allow you to move the scope forward or back for optimal placement. A thumbscrew on each ring provides easy mounting and removal.
    610450
    $20.98
    $24.67 save 15%

    OUT OF STOCK

  • Weaver SeeThru Steel Lock Scope Ring/Mount Black 1 in. Remington742/760

    These rings mount directly onto a .22 See Thru, affixing a riflescope with two straps and four screws, for each of the two rings, without the need of a base. These allow you to choose between iron sights or the scope. These rings allow you to move the scope forward or back for optimal placement. A thumbscrew on each ring provides easy mounting and removal. Steel construction with matte black finish.
    609480
    $20.74
    $24.39 save 15%
  • Weaver Side Mount Scope Base #3B

    This mount is designed to provide a mounting point for older firearms that do not accept top-mounting bases. Compatible with: Sears 54 and 100, Winchester 94 Post’64 & 94 Trapper.
    609308
    $24.25
    $28.52 save 15%

    OUT OF STOCK

  • Weaver Side Mount Scope Rings Gloss 1in. High Weaver

    The bracket and rings are one piece and high-profile. They easily attach and detach with its one-piece design. This shorter version will work with today’s shorter tube scopes.
    609848
    $38.36
    $46.68 save 18%
  • Weaver Thumbnut Base/Rings Scope Mount Matte 1in. Offset

    Designed for mounting 1� optics on Picatinny/Weaver rails. Two rail-clamping thumb screws enable tool-less mounting/dismounting of optics to AR-style rifles. 6061-T6 aluminum construction, Type-III hard coat anodized, matte black finish.
    715788
    $59.57
    $69.74 save 15%
  • Weaver Thumbnut Base/Rings Scope Mount Matte 30mm Offset

    A gloss black aluminum base for select firearms. A rear base for Peder Soli Lightning. A front base for Parker -Hale Midland, Peder Soli Lightning, and Remington 788 (all calibers).
    715841
    $59.57
    $69.74 save 15%

    OUT OF STOCK

  • Weaver Top Mount Scope Base #12

    Front Base:
    H&R 800; Savage 6, 7; Winchester 74; Remington 514, 550; Stevens 57, 76, 4171/2, 762, 85, 87, 872; Marlin 80, 81, 900, 917, XT-22, XT-17; Mossberg 50, 51, 151, 152, 350, 352.

    Rear Base:
    H&R 800; Sears 42, 43; Remington 514, 550; Savage 4, 5, 6, 7, 219; Marlin 80, 81, 900, 917, XT-22, XT-17; Winchester 57, 69, 69A, 72, 47, 74; Mossberg 25, 26, 42, 46M, 140, 142, 146; Stevens 56, 66, 57, 76, 4171/2, 762, 85, 87, 872; Mossberg 45-46 with 3/4" diameter barrels, 43, 44, 144, 46 BT, 35, 45, 46; Mossberg early models with 13/16" diameter barrels, 50, 51, 151, 152, 350, 352.
    707858
    $5.70
    $7.07 save 19%
  • Weaver Top Mount Scope Base #14

    A gloss black aluminum base. Rear base for Savage 99, 1895, and 1899.
    609908
    $14.24
    $16.95 save 16%
  • Weaver Top Mount Scope Base #16

    Front Base-
    Anschutz Mark12; H&R 250, 251, 264, 265, 365, 450, 550; Magnum Research Lone Eagle SSP 91 Pistol; Marlin 39A with a round barrel; Mossberg 43, 44, 144, 46BT, 35; Mossberg 45 and 46 early models with 13/16" diameter barrels; H&R 250, 251, 264, 265, 365, 450 & 550; Savage 19, 23; Savage 93 Rear; Savage 99, 1895, 1899; Savage 93R17, Mark II, Cub; Stevens 300, 305, 310, 315, CADET; Stevens 418, 418 1/2; Winchester 75 Target.
    Rear Base-
    Anschutz Mark12; Mossberg 40; Remington 514; Savage 3, 93, 99, 1895, 1899, 93R17, Mark II and Cub; Stevens 53, 300, 305, 310, 315, CADET, 418, 418 1/2, 83; Magnum Research Lone Eagle SSP 91 Pistol.
    609983
    $8.77
    $10.96 save 20%

    OUT OF STOCK

  • Weaver Top Mount Scope Base #19

    Rear Base for:
    Anschutz 153 Deluxe; Churchill 900; New England Firearms (H&R) N.E.F. 10-gauge shotgun; H&R 232C 10-gauge shotgun and 980 Ultra; Savage 25 (octagon barrel); Winchester 03, 63, and 61 with round barrel.

    Front Base for:
    Anschutz 153 Deluxe; Churchill 900; New England Firearms (H&R) N.E.F. 10-gauge shotgun; H&R 232C 10-gauge shotgun and 980 Ultra.
    609971
    $5.70
    $7.07 save 19%
  • Weaver Top Mount Scope Base #24

    An aluminum base for BRNO ZB .22 Hornet / .218 BEE firearms.
    703594
    $6.86
    $8.58 save 20%
  • Weaver Top Mount Scope Base #25

    Rear Base for:
    Browning BLR (lever action), Mossberg 810 & RM7, Colt Coltsman in 223, 243, and 308 Caliber (round receiver), Sauer SHR 970, Western Field 730,Winchester 52 (hole spacing different), 61 with Octagon Barrel.

    Front Base for:
    Browning BLR (lever action), Colt Coltsman in 223, 243, and 308 Caliber (round receiver), Sauer SHR 970.
    609310
    $6.86
    $8.58 save 20%
  • Weaver Top Mount Scope Base #35

    Front Base:
    Sauer 200, Colt Sauer, Bergara B-14, Beretta Pintail Slug Gun, Churchill Highlander, Shilen Round Receiver, Howa 1500 S/A, L/A, H&R 317, 322, Herters U9 Round Receiver, Ruger M77 (Round top Drilled), BSA Monarch Medium Action in 222, 243, 308, BSA CF2, Monarch Long Action in 7mm, 270, 30-06, ENFIELD with receiver cut down like Remington 721, Mossberg 100 ATR, 1500, 1700, MVP, Patriot, Raptor Arms same as Remington 700 Long Action, Remington 700, 78, 40X-L, 721, 725 (all Long Actions), Remington 700, 78, 40X-S, 722, 725 (all Short Actions), 700 Mzl Ldr 783, Smith and Wesson 1500, 1600, 1700, Weatherby Vanguard S/A, 300, Vanguard L/A, Weatherby Mark V Mag. Cal except 240 mag.

    Rear Base:
    Sauer 200, Colt Sauer, Mossberg 4 x 4, Remington 783, Shilen Round Receiver, Beretta Pintail Slug Gun.
    609311
    $5.70
    $7.07 save 19%

    OUT OF STOCK

  • Weaver Top Mount Scope Base #35M

    Rear Base for:
    Beretta Pintail Slug Gun; Colt Sauer; Sauer 200; Shilen Round Receiver.

    Front Base for:
    Beretta Pintail Slug Gun; BSA Monarch Medium Action in 222, 243, 308, CF2, Monarch Long Action in 7mm, 270, 30-06; Churchill Highlander; Colt Sauer; Enfield receiver cut down like Remington 721; Herters U9 Round Receiver; Howa Howa; Mossberg 100 ATR, 1500, 1700; Raptor Arms Same as Remington 700 Long Action; Remington 700, 78, 40x-L, 721, 725 (all long actions), 700, 78, 40x-S, 722, 725 (all short actions), 700 muzzleloader; Sauer 200; Shilen Round Receiver; Smith & Wesson 1500, 1600, 1700; Weatherby Vanguard.
    609690
    $5.70
    $7.07 save 19%

    OUT OF STOCK

  • Weaver Top Mount Scope Base #36

    Rear Compatibility:
    BSA Monarch Medium Action in 222, 243 & 308, CF2, Monarch Long Action in 7mm, 270 & 30-06, Churchill Highlander, Enfield with receiver cut down like Remington 721, Mossberg 100 ATR, 1500, 1700, Herters U9 Round Receiver, Howa Howa, Raptor Arms same as Remington 700 Long Action, Remington 700, 78, 40X-L, 721, 725 (All Long Actions), 700, 78, 40X-S, 722, 725 (All Short Actions), 700 Muzzle Loaders, Smith & Wesson 1500, 1600 & 1700, Weatherby Vanguard, Mark V standard, 240 magnum, Centerfire Pistol, 224 Varmintmaster, Ultra Lightweight.
    609312
    $5.70
    $7.07 save 19%
  • Weaver Top Mount Scope Base #36M

    Rear Base for: BSA Rear Mount: Monarch Medium Action in 222, 243, and 308; CF2; Monarch Long Action in 7mm, 270, and 30-06; Churchill Highlander; Enfield with receiver cut down like Remington 721; Herters U9 Round Receiver; Howa Howa; Mossberg 100 ATR, 1500, and 1700; Raptor Arms same as Remington 700 Long Action; Remington 700, 78, 40x-L, 721, 725 (all long actions); 700, 78, 40x-S, 722, 725 (all short actions); 700 muzzleloader; Smith & Wesson 1500, 1600, and 1700; Weatherby Vanguard, Mark V standard caliber including .240 mag, Centerfire pistol, 224 Varmintmaster, Ultra Lightweight.
    609689
    $5.70
    $7.07 save 19%

    OUT OF STOCK

  • Weaver Top Mount Scope Base #402M

    Rear Extension Base for:
    Navy Arms Country Boy Muzzleloader; Savage Axis Series, 10, 12, 110, 112 (all long action AccuTriggers); 10, 12, 110, 112 (all short action AccuTriggers); 10 ML II; Stevens Savage/Stevens 200; Winchester 52 with the hole spacing the same

    Front Extension Base for:
    Anschutz 1568; Browning BBR Bolt Action (long and short actions); Churchill 950 and 950-C; Marlin MR7; Navy Arms Country Boy Muzzleloader; Cooey 71; Enfield Winchester 70; Savage Axis Series, 10, 12, and 16 (short actions); Striker, Pistol, 510, 512, 516 S/A, 10 ML (2-piece only) pre-2003 models; 110, 112, 116 (long actions); 210 Shtg (use X-high rings) pre-2003 Models; 10, 12, 110, 112 (all long action AccuTriggers), 10 ,12 ,110, 112 (all short action AccuTriggers); 10 ML II; Sears 53; Stevens 110E, Savage/Stevens 200; Winchester 52 with the hole spacing same; 70 Long Action with the hole spacing same, 670, 770, 70 Short Action (1984+), 70 WSM.


    **Note**: For the Stevens Savage/Stevens 200 or shorter tube scopes or red dot scopes use #402 extension front base or one-piece base if available. Extension base allows an extra 0.689". The Winchester 52 with the hole spacing same may require bolt and/or safety alteration, otherwise firearm cannot function safely and properly. Consult with a qualified gunsmith. For the Winchester 52 and Winchester 70 Long Action Rifles, check the spacing of the tapped holes for the rear base and compare it to the hole spacing for the front base. For the same hole spacing, Model 70, use 47+ 46.
    704586
    $5.70
    $7.07 save 19%
  • Weaver Top Mount Scope Base #40A

    Rear Extension Base for:
    Beretta Pintail Slug Gun
    Colt Sauer.
    Beretta Pintail Slug Gun
    BSA Monarch Medium Action in 222, 243, 308; CF2, Monarch Long Action in 7mm, 270, 30-06
    Churchill Highlander
    Mossberg 100 ATR, 1500, 1700
    Colt Sauer
    Enfield with receiver cut down like Remington 721
    H&R 317, 322
    Herters U9 Round Receiver
    Howa Howa
    Raptor Arms same as Remington 700 Long Action
    Remington 700, 78, 40X-L, 721, 725 (all long actions), 700, 78, 40X-S, 722, 725 (all short actions), 700 Muzzleloaders
    Ruger M77 (round top drilled)
    Sauer 200
    Shilen Round Receiver
    Smith & Wesson 1500, 1600, 1700
    Weatherby Vanguard.
    608160
    $5.70
    $7.07 save 19%

    OUT OF STOCK

  • Weaver Top Mount Scope Base #410

    A one-piece aluminum base for use with Thompson Center Encore, Omega, and Impact.
    608440
    $14.75
    $17.57 save 16%
  • Weaver Top Mount Scope Base #411

    An aluminum front & rear base for Thompson Center System 1 & Black Diamond.
    701635
    $11.81
    $14.42 save 18%

    OUT OF STOCK

  • Weaver Top Mount Scope Base #413T

    Use the Weaver Multi-Slot Base Mount to support your optics or other accessories on a Savage Accutrigger Long Action rifle. This rail offers a multi-slotted design that is compatible with Weaver-style mounts and provides enough space for adjusting your eye relief or mounting multiple devices. It is made of lightweight and durable aluminum and will withstand the most powerful recoil.
    705760
    $30.05
    $36.56 save 18%
  • Weaver Top Mount Scope Base #417M

    An aluminum one-piece base for Mossberg 500 (1997+), 590 & 835 shotguns.
    609317
    $14.24
    $16.95 save 16%
  • Weaver Top Mount Scope Base #418M

    Rear Base for: CVA pre-2010 round barrels / post-1996 receivers, Remington Genesis, Traditions In-Line Muzzleloaders with round receivers, Winchester X-150, APEX Muzzleloaders. Front Base for: CVA pre-2010 round barrels / post-1996 receivers, Remington Genesis, Traditions In-Line Muzzleloaders with round receivers, Winchester X-150, APEX Muzzleloaders.
    608347
    $11.85
    $14.46 save 18%
  • Weaver Top Mount Scope Base #46M

    A matte black aluminum base designed for:

    Front Base: Anschutz 1568; Browning Bolt Action BBR, Hi-Power, other calibers, older models, BBR Bolt Action, long and short; actions; Cooey 712; Churchill 950, 950-C, 972-C; Colt 57; Enfield receiver cut down like a Winchester 70; H&R 300, 301, 330, 370 (pre-1973); Herters J9; Musgrave Mark III & Mark IV; Marlin 455, MR7; Mauser Receiver Ring ≈1.410" Diameter 98FN; Navy Arms Country Boy Muzzleloader; Sears 50, 51, 53; Parker Hale 1000, 1000C, 1100, 1200, 1700; Savage Axis Series, 10, 12, 16 (short actions); Striker; Pstl; 510, 512, 516 (short action), 10 ML (2-piece only) pre-2003 models; 110, 112, 116 (long actions); 210 Shtg (with X-high rings) pre-2003 models; 10, 12,110, 112 (long action AccuTriggger); 10 ML II; Stevens 110E, Savage / Stevens 200; Voere, 2165/1, 2165/2, 2165/3 & 2165/4 (Mauser action), 45, 46; Weatherby FN Mauser-style actions; Winchester 52 (same hole spacing), 70 long action (same hole spacing), 670, 770, 70 long action (different hole spacing), 70 Super Express, 70 (short action) 1984+, 70 WSM

    Rear Base:
    Navy Arms Country Boy Muzzleloader; Savage Axis Series, 10, 12, 110, 112 (all long action AccuTrigggers); 10 ML II;
    Stevens Savage / Stevens 200;
    Winchester, including Ranger 52 models (same hole spacing).
    609861
    $5.70
    $7.07 save 19%
  • Weaver Top Mount Scope Base #55

    A gloss black aluminum base for Marlin 57 Magnum firearms.
    609992
    $5.70
    $7.07 save 19%
  • Weaver Top Mount Scope Base #61

    A gloss black aluminum base. Compatible with: Anshutz 1568; Churchill 950 and 950-C; Ithaca LSA-55 and LSA-65; Knight Muzzleloaders, Knight MK-85, BK-92, and T-Bolt (flat receivers); Octagon barrel or flat top receivers; Sako Whitetail Hunter; Savage 10, 12, and 16 (short actions); Striker; Pstl; 510, 512, 516 (short actions); 10 ML (2-piece only) pre-2003 models; 110, 112, 116 (long actions); 210 Shtg (with extra-high rings) pre-2003 models; Shilen flat top receiver; Stevens 110E; Tikka with flat receiver;

    Front Base for:
    Ithica LSA-55 and LSA-65; Knight Muzzleloaders Knight MK-85, BK-92, and T-Bolt (flat receivers); Octagon Barrel or flat top receivers; Sako Whitetail Hunter; Shilen flat top receiver; Tikka with flat receiver.

    Note: The Savage 10, 12, and 16 (short actions); Striker; Pstl; 510, 512, 516 (short actions); 10 ML (2-piece only) pre-2003 models; 110, 112, 116 (long actions); 210 Shtg (use extra-high rings) pre-2003 models; and the Shilen Flat Top Receiver. For shorter tube scopes or red dot scopes use #402 extension front base or one-piece base if available. Extension base allows an extra 0.689".
    609884
    $6.91
    $8.64 save 20%
  • Weaver Top Mount Scope Base #61M

    Front Base for:
    Anschutz 1568; Browning Bolt Action BBR, Hi-Power, other calibers, older models, BBR Bolt Action, long and short actions; Cooey 712; Churchill 950, 950-C, 972-C; Colt 57; Enfield receiver cut down like a Winchester 70; H&R 300, 301, 330, 370 (pre-1973); Herters J9; Musgrave Mark III & Mark IV; Marlin 455, MR7; Mauser Receiver Ring ≈1.410" Diameter 98FN; Navy Arms Country Boy Muzzleloader; Sears 50, 51, 53; Parker Hale 1000, 1000C, 1100, 1200, 1700; Savage Axis Series, 10, 12, 16 (short actions); Striker; Pstl; 510, 512, 516 (short action), 10 ML (2-piece only) pre-2003 models; 110, 112, 116 (long actions); 210 Shtg (with X-high rings) pre-2003 models; 10, 12,110, 112 (long action AccuTriggger); 10 ML II; Stevens 110E, Savage / Stevens 200; Voere, 2165/1, 2165/2, 2165/3 & 2165/4 (Mauser action), 45, 46; Weatherby FN Mauser-style actions; Winchester 52 (same hole spacing), 70 long action (same hole spacing), 670, 770, 70 long action (different hole spacing), 70 Super Express, 70 (short action) 1984+, 70 WSM.

    Rear Base for:
    Navy Arms Country Boy Muzzleloader; Savage Axis Series, 10, 12, 110, 112 (all long action AccuTrigggers); 10 ML II; Stevens Savage / Stevens 200; Winchester, including Ranger 52 models (same hole spacing).

    Note: For Savage 10, 12, 16 (short actions); Striker; Pistol; 510; 512; 516 (short action); 10 ML (2-piece only) pre-2003 models with shorter tube scopes or red dot scopes use #402 extension front base or one-piece base if available. Extension base allows an extra 0.689".

    Note: For Savage / Stevens 200 with shorter tube scopes or red dot scopes use #402 extension front base or one-piece base if available. Extension base allows an extra 0.689".
    609890
    $5.70
    $7.07 save 19%
  • Weaver Top Mount Scope Base #62

    Rear Compatibility
    BSA: Monarch Medium Action in 222, 243 & 308 CF2, Monarch Long Action in 7mm, 270 & 30-06, Churchill Highlander, Enfield with receiver cut down like Remington 721, Mossberg 100 ATR, 1500, 1700, Herters U9 Round Receiver, Howa Howa, Raptor Arms same as Remington 700 Long Action, Remington 700, 78, 40X-L, 721, 725 (All Long Actions), 700, 78, 40X-S, 722, 725 (All Short Actions), 700 Muzzle Loaders, Smith & Wesson 1500, 1600 & 1700, Weatherby Vanguard, Mark V standard, 240 magnum, Centerfire Pistol, 224 Varmintmaster, Ultra Lightweight.
    609313
    $8.77
    $10.96 save 20%

    OUT OF STOCK

  • Weaver Top Mount Scope Base #63B

    This aluminum base works as a single-piece base for Marlin 45, 30AS, 336, 444, 1894, 1895, Camp 9, 308, 338, 1895. Western Field 740, and Mossberg 640.
    609314
    $9.38
    $11.73 save 20%

    OUT OF STOCK

  • Weaver Top Mount Scope Base #70

    A gloss black aluminum base for One piece base for Japanese 6.5 and 7.7mm; Remington 7 with 3 holes, 600, 660, XP-100, and XR-100. Note: The Japanese 6.5 and 7.7mm may require bolt and/or safety alterations without which the firearm will not function safely and properly. Consult with a qualified gunsmith.
    609316
    $19.05
    $22.40 save 15%

    OUT OF STOCK

  • Weaver Top Mount Scope Base #75

    A gloss black aluminum base designed for: Rear base for Peder Soli Lightning. Front base for Parker-Hale Midland, Peder Soli Lightning, and Remington 788 (all calibers).
    609856
    $5.70
    $7.07 save 19%

    OUT OF STOCK

  • Weaver Top Mount Scope Base #76

    An aluminum rear base for the Remington 788 (all calibers).
    608161
    $3.46
    $4.29 save 19%
  • Weaver Top Mount Scope Base #82

    A one-piece aluminum base designed for: New England Firearms (H&R) Handy Rifle, Hornet (with extra high rings), Huntsman Muzzleloader; H&R 155, SB2 Ultra (.22-250), Topper 158C (1973+), 157.
    609771
    $11.81
    $14.42 save 18%

    OUT OF STOCK

  • Weaver Top Mount Scope Base #88

    A one-piece aluminum base for Mossberg 500AS (pre-1997) & 600 shotguns.
    609315
    $7.32
    $9.15 save 20%
  • Weaver Top Mount Scope Base #90

    An aluminum base for Marlin 39A with round barrel.
    610182
    $14.24
    $16.95 save 16%

    OUT OF STOCK

  • Weaver Top Mount Scope Base #93

    A single-piece aluminum base designed for the Remington 4, 6, 74, 76, 7400, 7600, 750; Savage 67 Shotgun.
    609736
    $8.26
    $10.32 save 20%

    OUT OF STOCK

  • Weaver Top Mount Scope Base #94

    A gloss black aluminum frame designed for Winchester 94 Angle-Eject (except earliest models).
    Note: For the Marlin 39A (round barrel) the one-piece base mount with two set screws and newer guns are factory drilled and tapped.
    609409
    $6.75
    $8.43 save 20%
  • Weaver Top Mount Scope Base #95

    An aluminum rear base designed for Winchester 94 Angle-Eject Big Bore and Winchester 94 Angle Eject (except earliest models).
    609410
    $8.19
    $10.24 save 20%
  • Weaver Top Mount Scope Base #97

    One-Piece Base for: BSA Monarch Medium Action in 222, 243, and 308; Remington 700, 78, 40X-S, 722, 725 (all short actions), 700 Muzzleloader. Note: The BSA Monarch Medium Action in 222, 243, and 308 can be used with a tactical multi-slot base.
    609727
    $29.24
    $34.38 save 15%

    OUT OF STOCK

  • Weaver Top Mount Scope Base #98

    One-Piece Base for:

    BSA CF2, Monarch Long Action in 7mm, 270, and 30-06; Raptor Arms Same as Remington 700 Long Action; Remington 700, 78, 40X-L, 721, 725 (all long actions) Note: The BSA CF2, Monarch Long Action in 7mm, 270, and 30-06 and the Raptor Arms Same as Remington 700 Long Action can be used with a tactical multi-slot base.
    609696
    $22.81
    $26.83 save 15%

    OUT OF STOCK

  • Weaver Top Mount Scope Base #TO-09

    A gloss black adaptor base engineered to fit a 3/8� grooved Ruger 10/22 LR firearm. Allows .22 Tip-Off mounts to be used on non-factory dovetailed rifles for a secure, tight fit.
    609309
    $8.77
    $10.96 save 20%
  • Weaver Top Mount Scope Rings Gloss 1in. Extra High Weaver

    This pair of rings are compatible with 1� maintubes for mounting on Weaver-style rails. The saddle is made of aluminum while the strap is steel. Matte black.
    610431
    $30.17
    $36.70 save 18%

    OUT OF STOCK

  • Weaver Top Mount Scope Rings Gloss 1in. High Weaver

    This pair of rings is compatible with 1� maintubes and can be mounted on Weaver-style rails. The saddle is made of weight-reducing aluminum while the strap is crafted from steel.
    609318
    $23.85
    $28.05 save 15%
  • Weaver Top Mount Scope Rings Gloss 1in. High Weaver

    This pair of rings is compatible with 1� maintubes and can be mounted on Weaver-style rails. The saddle is made of weight-reducing aluminum while the strap is crafted from steel.
    609882
    $30.17
    $36.70 save 18%
  • Weaver Top Mount Scope Rings Gloss 1in. Medium Weaver

    This pair of rings is compatible with 1� maintubes and can be mounted on Weaver-style rails. The saddle is made of weight-reducing aluminum while the strap is crafted from steel.
    609828
    $23.08
    $27.14 save 15%
  • Weaver Top Mount Scope Rings Matte 1in. Extention Extra High Weaver

    This pair of rings are compatible with 1� maintubes for mounting on Weaver-style rails. The extension on one ring allows users to adjust the mounting position of the optic forward or backward to achieve optimal eye relief. The saddle is made of aluminum while the strap is steel.
    700795
    $32.50
    $39.54 save 18%

    OUT OF STOCK

  • Weaver Top Mount Scope Rings Matte 1in. Low Weaver

    This pair of rings are compatible with 1� maintubes for mounting on Weaver-style rails. The extension on one ring allows users to adjust the mounting position of the optic forward or backward to achieve optimal eye relief. The saddle is made of aluminum while the strap is steel.
    706222
    $30.17
    $36.70 save 18%

Manufacturers