Cart is Empty
Aluminum Shafts
3 products
1 categories
Carbon Shafts
34 products
7 categories
Youth Shafts
1 products
1 categories
The Bloodsport Prosecutor is a reduced diameter arrow featuring Rugged Wrap construction, ROC insert system and Blood Ring technology. Straightness .004". 300 spine 9.8GPI, 350 spine 7.9GPI, 400 spine 7.1 GPI.
|
An ultimate light-weight hunting arrow featuring Carbon Express backbone technology which integrates thin strands of Kevlar into the weave for added strength and impeccable 360 degree consistent spine. Paired with famous Red Zone Technology and you have a deadly recipe for unmatched broadhead accuracy. Straightness factor: .0025". Weight: 150 (6.6gpi), 250 (7.5gpi), 350 (8.4gpi). Weight tolerance: 1 grain.
|
Nano-Pro X-Treme is specifically engineered for today's competitive recurve bows. When the difference of success can be that of mere millimeters in FITA, NAA and NFAA long-distance field shooting, the Nano-Pro X-Treme is sure to deliver pinpoint accuracy as a result of its multi-spine construction. The Nano-Pro X-Treme recovers faster out of the bow while delivering the flattest trajectory and superior down range accuracy. Keeping true to form of the Nano-Pro series, it has the smallest diameter of any of the Carbon Express target arrows coupled with the parallel shaft design to virtually eliminate cross-wind drift. Straightness: 0.0015", Weight Tolerance: 1.0 grains, Spine Selection Tolerance: 0.002". Available spines: 900 (5.19 gpi) 800 (5.6 gpi), 750 (5.9 gpi), 700 (6.0 gpi), 650 (6.2 gpi), 600 (6.7 gpi), 550 (7.1 gpi), 500 (7.8 gpi), 450 (8.0 gpi), 400 (8.7 gpi), 350 (9.3 gpi).
|
Building off of the heritage of the Nano-XR, the Nano SST is an ultra-slim diameter shaft designed specifically for recurve bows. The Nano SST features Tri-Spine technology, with three specific spine areas with the stiffest being in the mid section of the shaft and the weakest spine configured to the back-end to allow for proper fletching clearance through the shot on a recurve bow. Nano SST has an ultra-slim parallel shaft profile that dramatically reduces cross-wind drift and is the ideal arrow for FITA, NAA and NFAA long-distance field shooting. Engineered for optimal velocity, strength and consistency, the Nano SST is constructed from 30-ton carbon so it will not take a set bend and ensures faster recovery out of the bow and superior downrange accuracy shot after shot. Straightness: 0.002", Weight tolerance: 1.0 grains, Spine selection tolerance: 0.002". Available spines: 1000 (5.11 gpi), 900 (5.57 gpi), 800 (5.88 gpi), 750 (6.38 gpi), 700 (6.46 gpi), 650 (6.95 gpi), 600 (7.33 gpi), 550 (7.79 gpi), 500 (8.18 gpi), 450 (8.97 gpi), 400 (9.62 gpi).
|
Building off of the heritage of the Nano-XR, the Nano SST is an ultra-slim diameter shaft designed specifically for recurve bows. The Nano SST features Tri-Spine technology, with three specific spine areas with the stiffest being in the mid section of the shaft and the weakest spine configured to the back-end to allow for proper fletching clearance through the shot on a recurve bow. Nano SST has an ultra-slim parallel shaft profile that dramatically reduces cross-wind drift and is the ideal arrow for FITA, NAA and NFAA long-distance field shooting. Engineered for optimal velocity, strength and consistency, the Nano SST is constructed from 30-ton carbon so it will not take a set bend and ensures faster recovery out of the bow and superior downrange accuracy shot after shot. Straightness: 0.002", Weight tolerance: 1.0 grains, Spine selection tolerance: 0.002". Available spines: 1000 (5.11 gpi), 900 (5.57 gpi), 800 (5.88 gpi), 750 (6.38 gpi), 700 (6.46 gpi), 650 (6.95 gpi), 600 (7.33 gpi), 550 (7.79 gpi), 500 (8.18 gpi), 450 (8.97 gpi), 400 (9.62 gpi).
|
Nano-XRZ featuring Tri-Spine technology which combines stiffer ends with a softer spine center for ultimate accuracy out of a compound bow. Like the Nano-SST for recurve archers the Nano-XRZ is constructed from 30-Ton carbon that ensures faster recovery out of the bow and superior down range performance. Straightness: .0025�, Weight Tolerance: 2 grains. Available sizes: 350 (9.9 gpi), 400 (9.0 gpi), 500 (7.8 gpi), 600 (7.0 gpi), 700 (6.3 gpi), 800 (5.7 gpi).
|
Nano-XRZ featuring Tri-Spine technology which combines stiffer ends with a softer spine center for ultimate accuracy out of a compound bow. Like the Nano-SST for recurve archers the Nano-XRZ is constructed from 30-Ton carbon that ensures faster recovery out of the bow and superior down range performance. Straightness: .0025�, Weight Tolerance: 2 grains. Available sizes: 350 (9.9 gpi), 400 (9.0 gpi), 500 (7.8 gpi), 600 (7.0 gpi), 700 (6.3 gpi), 800 (5.7 gpi).
|
Nano-XRZ featuring Tri-Spine technology which combines stiffer ends with a softer spine center for ultimate accuracy out of a compound bow. Like the Nano-SST for recurve archers the Nano-XRZ is constructed from 30-Ton carbon that ensures faster recovery out of the bow and superior down range performance. Straightness: .0025�, Weight Tolerance: 2 grains. Available sizes: 350 (9.9 gpi), 400 (9.0 gpi), 500 (7.8 gpi), 600 (7.0 gpi), 700 (6.3 gpi), 800 (5.7 gpi).
|
Nano-XRZ featuring Tri-Spine technology which combines stiffer ends with a softer spine center for ultimate accuracy out of a compound bow. Like the Nano-SST for recurve archers the Nano-XRZ is constructed from 30-Ton carbon that ensures faster recovery out of the bow and superior down range performance. Straightness: .0025�, Weight Tolerance: 2 grains. Available sizes: 350 (9.9 gpi), 400 (9.0 gpi), 500 (7.8 gpi), 600 (7.0 gpi), 700 (6.3 gpi), 800 (5.7 gpi).
|
Nano-XRZ featuring Tri-Spine technology which combines stiffer ends with a softer spine center for ultimate accuracy out of a compound bow. Like the Nano-SST for recurve archers the Nano-XRZ is constructed from 30-Ton carbon that ensures faster recovery out of the bow and superior down range performance. Straightness: .0025�, Weight Tolerance: 2 grains. Available sizes: 350 (9.9 gpi), 400 (9.0 gpi), 500 (7.8 gpi), 600 (7.0 gpi), 700 (6.3 gpi), 800 (5.7 gpi).
|
Nano-XRZ featuring Tri-Spine technology which combines stiffer ends with a softer spine center for ultimate accuracy out of a compound bow. Like the Nano-SST for recurve archers the Nano-XRZ is constructed from 30-Ton carbon that ensures faster recovery out of the bow and superior down range performance. Straightness: .0025�, Weight Tolerance: 2 grains. Available sizes: 350 (9.9 gpi), 400 (9.0 gpi), 500 (7.8 gpi), 600 (7.0 gpi), 700 (6.3 gpi), 800 (5.7 gpi).
|
Predator SD has the extra penetration in a small diameter.
|
Predator SD has the extra penetration in a small diameter.
|
The A/C/E is constructed of high strength carbon fiber bonded to a 7075 alloy core. Features a barreled design and polished black carbon finish. Straightness: .0015�, Weight Tolerance: 0.5 grains.
|
Apollo is the all-carbon starter arrow with the tolerances and spine sizes needed to ensure a correct tune for every archer. Straightness tolerance: +-.005". Available in sizes 840 (8.4 GPI), 950 (6.2 GPI), 1070 (5.9 GPI), 1200 (5.5 GPI), 1400 (4.2 GPI), 1600 (3.8 GPI), 1800 (3.6 GPI), and 2000 (3.4 GPI). Components sold separately.
|
Apollo is the all-carbon starter arrow with the tolerances and spine sizes needed to ensure a correct tune for every archer. Straightness tolerance: +-.005". Available in sizes 840 (8.4 GPI), 950 (6.2 GPI), 1070 (5.9 GPI), 1200 (5.5 GPI), 1400 (4.2 GPI), 1600 (3.8 GPI), 1800 (3.6 GPI), and 2000 (3.4 GPI). Components sold separately.
|
Apollo is the all-carbon starter arrow with the tolerances and spine sizes needed to ensure a correct tune for every archer. Straightness tolerance: +-.005". Available in sizes 840 (8.4 GPI), 950 (6.2 GPI), 1070 (5.9 GPI), 1200 (5.5 GPI), 1400 (4.2 GPI), 1600 (3.8 GPI), 1800 (3.6 GPI), and 2000 (3.4 GPI). Components sold separately.
|
Apollo is the all-carbon starter arrow with the tolerances and spine sizes needed to ensure a correct tune for every archer. Straightness tolerance: +-.005". Available in sizes 840 (8.4 GPI), 950 (6.2 GPI), 1070 (5.9 GPI), 1200 (5.5 GPI), 1400 (4.2 GPI), 1600 (3.8 GPI), 1800 (3.6 GPI), and 2000 (3.4 GPI). Components sold separately.
|
Carbon core arrow with diamond polished 7075 alloy jacket. Smaller diameter and increased weight make this an ideal arrow for outdoor target and field archery. Straightness tolerance: +-.001", Weight tolerance: +-2 gr. Available in sizes 530 (8.4 GPI), 490 (8.9 GPI), 450 (9.4 GPI), 400 (10.0 GPI), and 375 (10.3 GPI). All components sold separately.
|
Carbon core arrow with diamond polished 7075 alloy jacket. Smaller diameter and increased weight make this an ideal arrow for outdoor target and field archery. Straightness tolerance: +-.001", Weight tolerance: +-2 gr. Available in sizes 530 (8.4 GPI), 490 (8.9 GPI), 450 (9.4 GPI), 400 (10.0 GPI), and 375 (10.3 GPI). All components sold separately.
|
Carbon core arrow with diamond polished 7075 alloy jacket. Smaller diameter and increased weight make this an ideal arrow for outdoor target and field archery. Straightness tolerance: +-.001", Weight tolerance: +-2 gr. Available in sizes 530 (8.4 GPI), 490 (8.9 GPI), 450 (9.4 GPI), 400 (10.0 GPI), and 375 (10.3 GPI). All components sold separately.
|
Carbon core arrow with diamond polished 7075 alloy jacket. Smaller diameter and increased weight make this an ideal arrow for outdoor target and field archery. Straightness tolerance: +-.001", Weight tolerance: +-2 gr. Available in sizes 530 (8.4 GPI), 490 (8.9 GPI), 450 (9.4 GPI), 400 (10.0 GPI), and 375 (10.3 GPI). All components sold separately.
|
Carbon core arrow with diamond polished 7075 alloy jacket. Smaller diameter and increased weight make this an ideal arrow for outdoor target and field archery. Straightness tolerance: +-.001", Weight tolerance: +-2 gr. Available in sizes 530 (8.4 GPI), 490 (8.9 GPI), 450 (9.4 GPI), 400 (10.0 GPI), and 375 (10.3 GPI). All components sold separately.
|
This is the 23 Series offering that is the largest allowed for FITA and NAA competitions. It is 100 percent carbon cloth material at a plus or minus .001 straightness. This shaft is also popular with 3D archers. 400 spine, 12 pack, 8.0 GPI, .315" inside diameter, .354" outside diameter.
|
Traditional wood look reduced diameter arrow constructed of 100 percent high modulus carbon fiber. The advanced nano ceramic arrow coating improves penetration and allows for easy removal from targets. Straightness tolerance: 0.003�. Available in spine sizes 350 (11.2 GPI), 450 (10.7 GPI) and 550 (10.5 GPI), 650 (10.1 GPI). Weight matched to 0.5 grains. Nocks and inserts included.
|
The VF TKO is the ultimate standard diameter hunting arrow. The 100 percent all carbon shaft incorporates MaxxKe Technology increasing kinetic energy during impact and allowing for faster arrow recovery in flight. These arrows are accurate, extremely durable, and have the most consistent spine uniformity of any Victory arrow. Ice Nano ceramic coating improves penetration and easy arrow removal. Straightness: .006�. Shafts include Pin nock and pin nock bushing. Other components sold separately. Available spines: 300 (9.5 GPI), 350 (8.7 GPI, 400 (8.1 GPI).
|
A parallel taper design for superior accuracy, high FOC, and faster arrow recovery in flight. A thinner, weaker tail section reduces wind drift and improves clearance during launch, while a thicker front section increases FOC and improves down range accuracy. Spine tolerance: .001". Weight tolerance: 0.5 grains. Available in sizes: 300 (8.3 GPI), 355 (7.4 GPI), 450 (7.4 GPI), 550 (7.1 GPI). Shafts include gold pin bushing and pin nocks.
|
A parallel taper design for superior accuracy, high FOC, and faster arrow recovery in flight. A thinner, weaker tail section reduces wind drift and improves clearance during launch, while a thicker front section increases FOC and improves down range accuracy. Spine tolerance: .003". Weight tolerance: 0.5 grains. Available in sizes: 300 (8.3 GPI), 355 (7.4 GPI), 450 (7.4 GPI), 550 (7.1 GPI). Shafts include gold pin bushing and pin nocks.
|
A parallel taper design for superior accuracy, high FOC, and faster arrow recovery in flight. A thinner, weaker tail section reduces wind drift and improves clearance during launch, while a thicker front section increases FOC and improves down range accuracy. Spine tolerance: .006". Weight tolerance: 0.5 grains. Available in sizes: 300 (8.3 GPI), 355 (7.4 GPI), 450 (7.4 GPI), 550 (7.1 GPI). Shafts include gold pin bushing and pin nocks.
|