Cart is Empty
Crester features a sold hardwood base and variable speed dial to find the perfect rotational speed every time. Kit includes crester, (6) 1 oz. jars of Acry-Lac paint: black, red, yellow, blue, silver, and gold, and (4) paint brushes: hairline, 1/8�, 1/4�, and 1/2�.
|
The only jig with a helical that is designed to fletch a 2� vane. Designed for standard 19/64� diameter carbon shafts, this jig will give you the perfect helical for the Blazer or any other 2� style vane. The Blazer jig has a pre-set 3 degree helical built into the clamp and the jig places 3 vanes 120 degree’s apart. Comes with jig, clamp and instructions.
|
The Cauldron Jig is a 3 vane advanced fletching system. It provides the right amount of pressure for excellent adhesion, and you can fletch all three vanes at once so it's a big time-saver. The snap-in inserts are easy to change and don't require tools, so you can switch from a three degree right helical to a one degree right in no time. With this jig you can leave the nock on your arrow so you don't need to change the center post - simply twist the dial at the bottom of the jig to rotate your arrow for perfect indexing. The Cauldron pressure ring is adjustable with a single twist to accommodate micro, standard, and large arrow diameters. Cleaning is easy: the inserts can be soaked in acetone for an hour to remove instant glue residue.
|
Tower fletching jig allows you to fletch all three vanes at once. Includes 7 sets of arms - Straight (Up to 4� vane), 1 degree offset (Up to 4� vane), 3 degree right helical (Up to 2.25� vanes), 1 degree offset (for Impulse vanes), 2 degree right wing feather, 2 degree left wing feather arms, and Mylar vane arms. Center posts for standard carbon, F nock, A nock, pin nock, HE nock, swedged shafts and crossbow bolts are also included. Three different clamping rings accept any size arrow shaft.
|
Bohning's Multi-Fletcher Jig includes 7 color-coded clamp inserts for different angles, from straight up to a 3 degree right or left helical. It works with all arrow diameters from X10s to 27s. The Multi-Fletcher can do a 3 or 4 fletch and will accommodate arrows with stand nocks or x-bow bolts. The rugged 16-gauge stainless steel base and durable composite clamps can be cleaned with acetone to remove adhesive residue. The unique snap-lock clamp plate with inserts provide superior adhesion force and consistent angles. Also includes a feather inserts, which is specifically designed to avoid damage to feathers. The stainless steel base can be screwed down to a work table as a single unit or as a multiple jig arrangement.
|
Fletching jig features a Quick-set magnetic clamp with larger clamp grips for easier operation, easy off-set adjustment, and accurate “snap� indexing.
|
Fletching jig features a Quick-set magnetic clamp with larger clamp grips for easier operation, easy off-set adjustment, and accurate “snap� indexing.
|
Replacement clamps for the Bohning Pro Class Fletching Jig.
|
Replacement clamps for the Bohning Pro Class Fletching Jig.
|
Tower fletching jig allows you to fletch all 3 vanes at once with a 3 degree helical or 1 degree right offset. Designed for shafts up to .350� in diameter.
|
Vertical fletching jig accommodates all standard carbon, small diameter carbon, large diameter carbon, and aluminum shafts up to 23/64� O.D. Designed to work with arrows that have a press fit nock system. Places 3 vanes on a 3 degree right helical at 120 degrees apart and includes two pressure rings allowing you to apply the perfect amount of pressure on different diameter shafts. Jig will only work with vanes up to 2 inches in length.
|
Tower fletching jig allows you to fletch all three vanes at once. Includes 3 sets of arms - Straight (Up to 4� vane), 1 degree offset (Up to 4� vane), and 3 degree right helical (Up to 2.25� vanes). Center posts for standard carbon, F nock, A nock, HE nock, pin nock, and crossbow bolts are also included. Two different clamping rings accept any size arrow shaft.
|