Since 1998, eders.com has offered the largest selection archery and hunting equipment at the best prices. For even more savings on Archery and BowHunting Supplies, Join our Professional Bowhunter Buyer's Club, membership is NOW FREE for all.
Get Free Standard Shipping on all orders over $200.00. Just type: freeshipping in the coupon field during checkout.
Barnes’ specially formulated CR-10 bore cleaning solvent effectively removes the toughest copper, brass & lead deposits. Leaves rifling clean for top accuracy and longer barrel life. Dissolves layers of corrosive carbon and powder build-up in the throat area caused by repeated exposed to extreme temperatures. This is particularly critical to extending barrel life of high velocity rifle cartridges.
The CR-10 Barnes Bore cleaner is formulated containing ammonia to remove copper deposits left by jacketed bullets, brass and lead fouling. This cleaning solution is non-corrosive and will not harm barrels. It is recommended to apply an oil patch after application of cleaner to prevent rusting.
Aluminum Black Metal Finish blackens aluminum parts quickly covering scratches and marred areas. Can also be used to blacken name plates, plaques and trophies.
Specially formulated to remove dirt, fouling, grease and oil quickly and easily. It’s a safe, easy and effective way to clean your firearm thoroughly or as a preparatory cleaner for blueing or browning.
Genuine Oil Gun Stock Finish applies easily and evenly bringing back a traditional hand-rubbed oil finish and can be used to fills grain by wet sanding.
Safely remove carbon fouling without damaging the plastic or rubber on your firearm. A high pressure aerosol jet literally blows the gunk out of the action of your rifles, shotguns, and pistols and the included extension tube allows you to access those hard to reach places. Best of all, Gun Scrubber leaves no residue behind: Just re-oil and lubricate and you're done.
Safely remove carbon fouling without damaging the plastic or rubber on your firearm. A high pressure aerosol jet literally blows the gunk out of the action of your rifles, shotguns, and pistols and the included extension tube allows you to access those hard to reach places. Best of all, Gun Scrubber leaves no residue behind: Just re-oil and lubricate and you're done.
Safely remove carbon fouling without damaging the plastic or rubber on your firearm. A high pressure aerosol jet literally blows the gunk out of the action of your rifles, shotguns, and pistols and the included extension tube allows you to access those hard to reach places. Best of all, Gun Scrubber leaves no residue behind: Just re-oil and lubricate and you're done.
The Lead Remover and Polishing Cloth is a quick way to remove lead, burn rings, rust, tarnish, copper and carbon residue. It is excellent for stainless, nickel and most metal surfaces making it ideal for cleaning chambers and cylinders. It also cleans and polishes metal, wood and porcelain surfaces.
Walnut Stain is a water-based, fast-drying formula that creates a true-to-color, non-bleeding stain Producing a clear, rich color without clouding or smearing.
The Birchwood Casey Stock Rejuvenator 2oz Cleaner & Protectant will enrich the color of your faded synthetic stocks. This rejuvenator cleaner is excellent for plastic, wood or metal and is harmless to blued, nickel, stainless metals and camo finishes. This Spray-on/Wipe-off Cleaner & Protectant puts on a like-new shine on your leather and vinyl gun cases and add a showroom gloss to all your accessories. The Birchwood Casey Stock Rejuvenator Cleaner & Protectant Pump Spray Bottle is non-flammable, odorless and available in a convenient 2-ounce pump spray bottle.
Super Blue Liquid Gun Blue is a double-strenth formula creating a deep, blackish blue finish on highly polished steel parts and hardened steels containing nickel and chrome alloys (except stainless).
Super Bright Touch-Up Pens offer a great way to touch up chipped or worn firearm and archery sights. Three pen kit includes one of each color: Red, Green and white. Apply two layers of white undercoat before the red or green for best results.
Walnut Stain is a water-based, fast-drying formula that creates a true-to-color, non-bleeding stain Producing a clear, rich color without clouding or smearing.
This biosynthetic All-In-One (CLP) is expertly crafted using the finest base oils, additives, and most effective solvents that modern chemistry has to offer. Providing superior two-in-on cleaning and lubrication, the All-In-One (CLP) removes carbon fouling, oil, and grime, while penetrating deep to provide protection from rust and corrosion, all the while minimizing friction and wear from metal-to-metal contact. The All-In-One (CLP) is a great addition to your range bag to keep your firearms running smoothly.
This biosynthetic All-In-One (CLP) is expertly crafted using the finest base oils, additives, and most effective solvents that modern chemistry has to offer. Providing superior two-in-on cleaning and lubrication, the All-In-One (CLP) removes carbon fouling, oil, and grime, while penetrating deep to provide protection from rust and corrosion, all the while minimizing friction and wear from metal-to-metal contact. The All-In-One (CLP) is a great addition to your range bag to keep your firearms running smoothly.
This biosynthetic All-In-One (CLP) is expertly crafted using the finest base oils, additives, and most effective solvents that modern chemistry has to offer. Providing superior two-in-on cleaning and lubrication, the All-In-One (CLP) removes carbon fouling, oil, and grime, while penetrating deep to provide protection from rust and corrosion, all the while minimizing friction and wear from metal-to-metal contact. The All-In-One (CLP) is a great addition to your range bag to keep your firearms running smoothly.
Battle Born Grease represents some of the most advanced lubricant technology. It is a versatile, premium quality, synthetic grease fortified with Sub-Micron size PTFE. Blended completely with pure synthetic base oils, additives and shear stable thickeners to provide maximum firearm protection in extremely high and low temperatures (Operating Range -75° to +510°F).
Battle Born High Purity Oil is a blend of the finest high quality synthetic oils available. This blend is treated with extreme pressure and the most effective corrosion inhibitors, anti-oxidant, anti-foam and anti-wear additives on the market. The unique combination provides maximum lubrication and protection for your firearm in the extreme conditions Mother Nature can throw at you. This is a multi-service lubricant and protectant for extended use under high and low temperature conditions (from -90°F to 417°F). Battle Born High Purity Oil is safe to use on all metal, plastic and polymer parts.
Battle Born High Purity Oil is a blend of the finest high quality synthetic oils available. This blend is treated with extreme pressure and the most effective corrosion inhibitors, anti-oxidant, anti-foam and anti-wear additives on the market. The unique combination provides maximum lubrication and protection for your firearm in the extreme conditions Mother Nature can throw at you. This is a multi-service lubricant and protectant for extended use under high and low temperature conditions (from -90°F to 417°F). Battle Born High Purity Oil is safe to use on all metal, plastic and polymer parts.
Battle Born HP Pro Lubricant and Protectant is a unique formula that provides maximum firearm lubrication and protection in extreme environmental conditions. This blend of the highest quality synthetic oils is treated with the most effective extreme pressure, corrosion inhibitors, anti-oxidant, anti-foam and anti-wear additives on the market. It's a multi-service lubricant and protectant that is ideal for extended service under high and low temperature conditions (from -65°F to 507°F). Safe to use on all metal, plastic and polymer parts.
Breakthrough has made a biodegradable formula that actually removes copper and helps prevent copper build up without barrel etching or odors. This formula was created to be good for your barrel and the environment at the same time giving you a clean barrel and not using ammonia or petroleum products from Breakthrough Technologies.
Breakthrough has made a biodegradable formula that actually removes copper and helps prevent copper build up without barrel etching or odors. This formula was created to be good for your barrel and the environment at the same time giving you a clean barrel and not using ammonia or petroleum products from Breakthrough Technologies.
Breakthrough Military-Grade Solvent has no odor, is non-staining, removes all fouling, while completely evaporating, leaving absolutely no residue behind. And it's truly pH neutral, which means it's safe on your firearm's wood, plastics, polymers, cerakote and/or hydro-printing. And unlike traditional firearm cleaning solvents, Breakthrough Military-Grade Solvent has a flashpoint of 150° F and is therefore considered non-flammable. Breakthrough Military-Grade Solvent cleans efficiently, dramatically reducing the duration of cleaning while using less product.
Breakthrough Military-Grade Solvent has no odor, is non-staining, removes all fouling, while completely evaporating, leaving absolutely no residue behind. And it's truly pH neutral, which means it's safe on your firearm's wood, plastics, polymers, cerakote and/or hydro-printing. And unlike traditional firearm cleaning solvents, Breakthrough Military-Grade Solvent has a flashpoint of 150° F and is therefore considered non-flammable. Breakthrough Military-Grade Solvent cleans efficiently, dramatically reducing the duration of cleaning while using less product.
Breakthrough Military-Grade Solvent has no odor, is non-staining, removes all fouling, while completely evaporating, leaving absolutely no residue behind. And it's truly pH neutral, which means it's safe on your firearm's wood, plastics, polymers, cerakote and/or hydro-printing. And unlike traditional firearm cleaning solvents, Breakthrough Military-Grade Solvent has a flashpoint of 150° F and is therefore considered non-flammable. Breakthrough Military-Grade Solvent cleans efficiently, dramatically reducing the duration of cleaning while using less product.
Butch's black powder bore shine, Removes powder, lead and plastic fouling, Odorless, Non-toxic, non-flammable and biodegradable, Protects against rust and corrosion
Butch's Bore Shine a non-abrasive chemical solvent is specifically designed to remove all forms of bore fouling including copper with an absolute minimum of effort and no damage. It will quickly remove carbon build-up, even in difficult to clean areas like the chamber throat. It also removes lead, wax and even plastic shotgun wad build up.
Carlson’s Choke Tube and Carbon Cleaner is nonflammable, non-hazardous and it is biodegradable. It provides you with a safe and effective way to clean carbon and plastic wad fouling from choke tubes and all of those semi-automatic shotguns gas system parts. This product also works well to clean AR-15 and other rifle bolt assemblies. Supplied in a 7 oz jar.
Designed for black powder shooters, this formula is both a cleaner and oil for black powder guns. Cleans effectively while removing powder and protecting against rust.
A high-pressure solution that cleans dirt, grease, and oil from metal surfaces. Dries in seconds and restores surfaces to like-new condition. Use on gun barrel, bore, trigger assembly, bolt, firing pins, extractor, gas pistons, magazines, choke tubes, and other metal parts. Use the extender tube to clean difficult areas.
Dri-Lube is formulated to reduce friction without using sticky oils or silicone. Evaporates in seconds, leaving a dry lubricating film. 4 oz aerosol can.
Hoppe’s No. 9 is the original formula created in 1903. Cleans the bore in all pistol, rifle, and shotgun platforms. Removes carbon, powder, and lead fouling. Loosens abrasive debris to prevent wear and tear.
Hoppe’s No. 9 is the original formula created in 1903. Cleans the bore in all pistol, rifle, and shotgun platforms. Removes carbon, powder, and lead fouling. Loosens abrasive debris to prevent wear and tear.
Hoppe’s No. 9 is the original formula created in 1903. Cleans the bore in all pistol, rifle, and shotgun platforms. Removes carbon, powder, and lead fouling. Loosens abrasive debris to prevent wear and tear.
Hoppe’s No. 9 is the original formula created in 1903. Cleans the bore in all pistol, rifle, and shotgun platforms. Removes carbon, powder, and lead fouling. Loosens abrasive debris to prevent wear and tear.
Hoppe’s No. 9 is the original formula created in 1903. Cleans the bore in all pistol, rifle, and shotgun platforms. Removes carbon, powder, and lead fouling. Loosens abrasive debris to prevent wear and tear.
Hoppe’s Traditional lubricating Oil is a high-viscosity oil. Extra-long lasting and won’t harden or gum up. Created to use after cleaning a firearm bore with Hoppe’s Tradition No. 9 Gun Bore Cleaner by ensuring it neutralizes the cleaner and leave behind an even coat of lubrication.
Hoppe’s Traditional lubricating Oil is a high-viscosity oil. Extra-long lasting and won’t harden or gum up. Created to use after cleaning a firearm bore with Hoppe’s Tradition No. 9 Gun Bore Cleaner by ensuring it neutralizes the cleaner and leave behind an even coat of lubrication.
Designed for advanced military and law enforcement style handheld and crew-served weapons. Replaces all gun oils, CLP’s, and dry lubes without evaporation, separation, gumming, odor, etc. Protects against wear, humidity, moisture, saltwater; leaves a long-lasting film that repels dust and dirt and will not evaporate.
Ideal for firearms that have been exposed to moisture or water. Removes moisture and provides a light coating of oil to prevent corrosion. 4 oz aerosol spray can.
Hoppe’s Quick Clean cloth features a nonabrasive material that removes lead and carbon buildup on anything from firearm exteriors to golf clubs. The cloth measures 12� x 8’. Caution: continued hard rubbing may remove some blued finishes.
Provides lubricity for resizing and forming of metallic rifle and pistol cases. Reduces the force needed to resize 308 Win. cases from 35 to 70 percent compared to other lubes. Eliminates the possibility of denting the case shoulder.
This Remington Bore cleaner is formulated for rifles to improve cleaning, accuracy and performance. It is fast and easy to use with no soaking or foul odors. It contains polishing compounds to make your bore mirror clean. The bore cleaner is non acidic will not corrode metal and environmentally safe.
The Remington Brite Bore Liquid Cleaner is a liquid cleaner used on rifles, shotguns and handguns to remove carbon and powder fouling and achieves clean choke tubes, revolver cylinders and chambers. Brite Bore also removes copper, lead and plastic deposits without leaving a strong odor. This product does not contain chlorofluorocarbons (CFC's).
The Remington Action Cleaner comes in a 10.5 oz jet-spray extension tubing aerosol can and is designed to clean firearm actions and fire control mechanisms without having to disassemble. It does not contain any CFC's or carcinogens and is safe to use on ejectors, firing pin assemblies, triggers and bolt releases. It is a non-staining cleaner and dissolves lubricants, greases and oil.
The Remington Moistureguard multipurpose Rem Cloth pad is a 10"x10" cloth with a long lasting barrier blend of Rem Oil and advanced Volatile Corrosion Inhibitor technology to protect metal surfaces from rust and corrosion. It is safe to use on wood, synthetics and all metals (ferrous and non-ferrous).
The Remington Rem-Oil Liquid Gun Cleaner Lubrication Protection is a long lasting formulated protective lubricant designed to clean dirt and grime from exposed metal surfaces and protects internal and external metal surfaces from rust and corrosion. This product does not contain chlorofluorocarbons (CFC's) or paraffins and remains effective in temperatures ranging from -20-120 degrees.
Rem Oil cleans, lubricates, and protects firearms while keeping them in top shape. Penetrates into the smallest metal pores with a long-lasting film that reduces metal-to-metal wear. Displaces microscopic traces of water for advanced moisture resistance and rust protection.
Rem Oil is the most versatile gun oil you can buy. The same great lubricant since 1913, the advanced formula cleans, lubricates and protects your valuable firearms so they'll keep running smoothly and looking like new. Rem Oil penetrates into the smallest metal pores, then leaves a tough, long-lasting film to help reduce metal-to-metal wear. Quickly displaces even microscopic traces of water for advanced moisture resistance and rust protection. Remington Rem-Oil Cloth Wipes are what you need to assist you in your firearm cleaning. These patches are 6"x 8�.
The Remington Rem-Oil Liquid Gun Cleaner Lubrication Protection is a long lasting formulated protective lubricant designed to clean dirt and grime from exposed metal surfaces and protects internal and external metal surfaces from rust and corrosion. This product does not contain chlorofluorocarbons (CFC's) or parffins and remains effective in temperatures ranging from -20-120 degrees.
Rem Oil is the most versatile gun oil you can buy. The advanced formula cleans, lubricates and protects your valuable firearms so they'll keep running smoothly and looking like new. It penetrates into the smallest metal pores, then leaves a tough, long-lasting film to help reduce metal-to-metal wear. This gun oil quickly displaces even microscopic traces of water for advanced moisture resistance and rust protection.
The Remington REM Oil contains 60 premoistened with Teflon advanced formula, disposable pop up wipes designed to clean and lubricate firearms and other metal surfaces. These wipes prevent rust and corrosion, removes fingerprints and dirt while displacing non-visible moisture.
The Remington Rem-Oil liquid cleaner is a lubricant made with Teflon that uses Volatile Corrosion Inhibitor technology designed to protect metals from rust and corrosion and displaces moisture. This product will guard hunting, fishing and marine gear and remains effective in temperatures from -20-120 degrees.
The Remington 4 oz Drilube Aerosol Dry Lubricant is a instant drying, non-staining Teflon coating lubricant designed for firearm cleaning over a wide range of temperatures. It comes in an easy-to-use aerosol can.
Remington Shotgun Cleaner cleans trigger groups, gas ports, choke tube threading, receivers, chambers, barrels and magazine tubes, while dissolving powder residue, fouled lubricants, burnt carbon deposits and gunk. This shotgun cleaner blasts away gummy caked-on grime from hard to reach areas such as ejectors, firing pin assemblies, trigger components and bolt recesses. Also works great on shotguns, rifles and handguns. Safe for polymers - will not damage magazines, gun stocks, camo finishes or grips.
The FP-10 with Precision Applicator Tips provides accurate delivery of lubricant without wasting and using excess formula. The included metal tips come in ultra-fine and fine, and an adjustable plastic tip is cut-to-size. The included cover is compatible with all tips. FP-10 removes carbon, lead and powder fouling while reducing friction and wear as well as protecting against rust and corrosion.
Shooter’s Choice FP-10 is designed to reduce friction and wear on firearms, as well as protect against rust and corrosion. Removes carbon, lead and powder fouling.
Shooter’s Choice Copper Remover features an extra strength formula that quickly removes copper or gilded metal fouling from rifle and pistol bores.
A one-step concentrated solvent from Shooter's Choice. Removes all types of fouling in a non-abrasive formula designed for pistols, shotguns and rifles.
A one-step concentrated solvent from Shooter's Choice. Removes all types of fouling in a non-abrasive formula designed for pistols, shotguns and rifles.
MC-7 Extra Strength Bore Cleaner is an aerosol version of the top seller, MC-7. This ammonia-free cleaner quickly removes copper, lead, carbon and powder fouling from the bore, receiver and trigger groups. The non-abrasive formula is harmless to the bore surface.
Polymer Safe Quick Scrub is harmless to polymers, plastics, and finishes while quickly removing fouling, residue, and buildup. Great for use on all firearms.
Quick Scrub III removes fouling, residue, and powder buildup from firearm actions and trigger groups without disassembly. Recommended for all conventional firearms and black powder firearms.
Rust Prevent is a moisture displacing agent that provides a protective coating to prevent rust and corrosion. Protects from humid, salty conditions and neutralizes fingerprint acid on all rifles, shotguns and pistols.
Shotgun and Choke Tube Cleaner is designed to remove fouling from barrels, choke tubes, and ports. The formula quickly erases plastic wad fouling and easily cleans receiver and trigger assemblies.
Synthetic All-Weather High-Tech Gun Grease has been engineered to lubricate and protect all firearms, fishing tackle, boats, bikes, autos and tools. The plastic syringe allows accurate placement on small components without wasting product. The all-weather lubrication clings to metal and works in extreme hot and cold temperatures. This product is great for nickel, stainless and chrome objects and is odorless for safe use on hunting gear.
Action Blaster liquefies and elimates carbon fowling and old lubricant buildup without dissambling your firearm. Just spray into the action or bore for quick, easy results.
Triple-action, all-in-one, cleaner, lubricant and protectant cleans and degreases then evaporates Leaving a light lubricant layer and rust inhibitor with a pleasant aroma.
An advanced formula solvent that helps clean fouling from your muzzleloader. An additional ingredient helps protect against rust allowing two steps in one.
