Since 1998, eders.com has offered the largest selection archery and hunting equipment at the best prices. For even more savings on Archery and BowHunting Supplies, Join our Professional Bowhunter Buyer's Club, membership is NOW FREE for all.
Get Free Standard Shipping on all orders over $200.00. Just type: freeshipping in the coupon field during checkout.
Black high-viscosity rubber toughened, great for carbon and aluminum shafts. Shock resistant .008" gap filler and 3700 PSI strength, military grade, max 90 second bond time temp rated 65 degrees F to +280 degrees F.
Nuclear Vane Juice features a proprietary formula that strops vane quills of all oils and impurities to help create a powerful bond between the vane and shaft. Use the precision-point pen to apply directly to the quill.
Cyanoacrylate gel adhesive designed to be used with plastic, instantly bonds nocks and vanes permanently to aluminum and carbon shafts. Remove by cutting.
Each capful dissolved in water will clean about 200 arrows. Max Clean will work on all types of arrow shafts. There is enough Max Clean to clean up to 500 shafts.
AAE's Max Clean Arrow Wipes are a quick and easy method of cleaning arrow shafts for proper fletching adhesion. No more spilling liquids or smelly chemicals in your house or shop when prepping arrow for new shaft or re-fletching projects. Max Clean Arrow Wipes can be used on all forms of carbon, aluminum, and crested arrow. 10 wipes per pack.
Two part epoxy for gluing nock and point inserts into aluminum shafts, designed for use with carbon and aluminum. Package design proportions amounts automatically, requires Twenty-four hours for full cure.
IC-GEL is a cyanoacrylate paste that is extremely thick which comes in an applicator tube like toothpaste. It has the same bonding and curing time characteristics as MAXI-CURE.
Use less glue for maximum adhesion with the fastest cure time. Instant glue for fletching vanes, feathers and nocks, clamp time is 15 seconds with full cure in only 2 hours.
Use less glue for maximum adhesion with the fastest cure time. Instant glue for fletching vanes, feathers and nocks, clamp time is 15 seconds with full cure in only 2 hours.
Apply Bohning Feather Fletching Tape to feather quill for a strong, reliable bond. Use for emergency field repair, will fletch 3 1/2 dozen arrows. 720" per roll.
Low-temp hot melt for carbon shafts, instant full strength set-up in cold water. Super strong, easy to apply heat reversible. Stick will do approximately 144 inserts.
Bohning Ferr-L-Tite Melt Stick softens under flame. Good for inserting aluminum broadhead adapters and target points, reheating will allow point to be removed.
Fletch Fuse is designed for use with vanes, feathers and nocks. It has a clamp time of 30 seconds and a cure time of 2 minutes. Comes in a 1/2 oz. bottle.
Bohning Glue Bottle Dispenser w/Tip is a clear bottle with applicator tip designed to hold 2 oz of solvent or adhesive. Comes with red cap for air tight seal.
This combo pack helps save time while fletching arrows. Use the easy plunge-tip pen applicator to clean the base of the vane and let dry. Add Zing Kling to secure the vane with a strong hold on the arrow shaft. Kling comes in a 20 gm aluminum tube, Primer Pen comes in an 11 gm pre-loaded plunge-tip pen.
Use Zing Kling to secure the vane with a strong hold on the arrow shaft. Zing Kling is thick enough to resist running and rubber-toughened to withstand abuse at high speeds. Surfaces should be clean and dry before boding. Apply enough to leave a thin layer after compression. Press parts together and hold for a few seconds. Zing Kling forms an adequate bond in less than one minute. Kling comes in a 20 gm aluminum tube and includes an extra spout and cap.
For use with Zing fletching glue or other fast set cyanoacrylate glues. Eliminates the need to clean the base of Flex Fletch vanes before fletching. Simply apply the primer to the base of the vane and then fletch as normal. Also speeds up set and cure times for fast set glues.
Provides solid yet flexible bond that is ideal for installing inserts and fletching, and provides instant adhesion in seconds. Blue formula makes it easy to see and identify excess dripping, and will dry practically clear. Not for use with hidden insert systems.
Debonder is used to remove old glue from arrows. Work into the glued area with a paper towel until it starts to debond the glue, and then wipe the shaft clean. Wash your hands after using this product.
Fast drying, long lasting glue that works with feathers, vanes, nocks and inserts. Works with all type of shafts including aluminum, carbon, glass, and even wood. When using it on wooden shafts, it is recommended use the accelerator.
Fast drying, long lasting glue that works with feathers, vanes, nocks and inserts. Works with all type of shafts including aluminum, carbon, glass, and even wood. When using it on wooden shafts, we recommend using the accelerator.
Fast drying, long lasting glue that works with feathers, vanes, nocks and inserts. Works with all type of shafts including aluminum, carbon, glass, and even wood. When using it on wooden shafts, we recommend using the accelerator.
Fast drying, long lasting glue that works with feathers, vanes, nocks and inserts. Works with all type of shafts including aluminum, carbon, glass, and even wood. When using it on wooden shafts, we recommend using the accelerator.
Instant bond arrow adhesive bonds in seconds to feathers, vanes, nocks, and inserts. Apply small amount to one clean surface, then place in position desired.
Instant bond arrow adhesive bonds in seconds to feathers, vanes, nocks, and inserts. Apply small amount to one clean surface, then place in position desired.
The LCA Fletching Activator is great for prepping your arrows for fletching. You can spray your arrow shaft, before you fletch, and it will enhance the bond of the LCA Fletching glue to the arrow shaft. It also works great for cleaning the arrow shaft before you fletch in preparation for a perfect fletching job.
The LCA Fletching Glue is perfect for all types of fletching. Great for gluing vanes, feathers, points, inserts or bushings. The LCA glue dries fast, but dries soft, for a stronger hold and doesn't leave a white residue on your shaft after the glue dries.
The OMP EZ Prep Arrow Cleaner quickly gets your arrows ready for wrapping and fletching by removing dir, oil, and debris from arrow shafts. No mixing required for easy application. Our proprietary quick dry cleaning formula enables fletching to occur within 2 minutes after application.
Archery adhesive was chemically composed to apply with ease and provide a superior, impact-resistant bond that cures in seconds and works on carbon, aluminum and wood shafts. Instantly bonds nocks, vanes, feathers, and inserts. Includes one Stuck Glue Tip.
This Insert Glue is perfect for all inserts. With a 90 second drying time, it will give enough working time for even the hidden inserts. This glue is impact resistant to absorb shock and tough enough for harder 3D targets.
Cyanoacrylate, extra thick glue designed for carbon or aluminum arrows, inserts, and nocks. For instant adhesion spread glue on vanes or feathers, spray arrow with accelerator and position in jig.
Fletching adhesive features rapid fixture time that allows etching into the vane surface for quick drying time which prevents vane curling. Rapid drying in cool weather and low humidity conditions, works on difficult surfaces, including glossy shafts. Perfect viscosity for applying a small bead.
Woody Wire Flex Tough Bowfishing Gel is designed to be super shock resistant and rubber tough. For bowfishing points and nocks. Works almost instantly to get you back on the water.
