Since 1998, eders.com has offered the largest selection archery and hunting equipment at the best prices. For even more savings on Archery and BowHunting Supplies, Join our Professional Bowhunter Buyer's Club, membership is NOW FREE for all.
Get Free Standard Shipping on all orders over $100.00. Just type: freeshipping in the coupon field during checkout.
The AAE Bitz Nock Receiver is an anodized 3 or 4 vane fletch nock receiver that allows the replacement of a single vane. The fork within the receiver holds nocks in a consistent manner, allowing for desired vane placement.
Fletching tool designed for simplicity has a fixed 1 degree offset. By turning the X-Stand arrow holder over a different size shaft can be held. Clamp is made from a rigid material that repels drops of glue.
Fletch larger diameter crossbow bolts quickly, and with precision & ease, dramatically increase accuracy, designed to apply a unique radical helical to 2� vanes that not only stiffens them, but creates more torque and accepts all nock designs.
The carbon E-Z fletch tool is designed for the carbon market and will fit any shaft size from the smallest carbon diameter up to a 2018 aluminum size shaft. The carbon fletcher is available in 1 degree straight or 6 degree right helical styles. Arrows fletched with the 6 degree helical will clear any shoot through rest. Interchangeable arms are available for both styles. Will accept feathers or vanes any length.
The carbon E-Z fletch tool is designed for the carbon market and will fit any shaft size from the smallest carbon diameter up to a 2018 aluminum size shaft. The carbon fletcher is available in 1 degree straight or 6 degree right helical styles. Arrows fletched with the 6 degree helical will clear any shoot through rest. Interchangeable arms are available for both styles. Will accept feathers or vanes any length.
E-Z Fletch Mini fletches vanes up to 2 1/4� while still providing the ease of fletching 3 vanes at one time, quickly, easily, conveniently and accurately anywhere you are. Provides maximum helical for these smaller vanes for the fastest stabilization and most accurate arrow flight possible even when shooting broadheads.
Replacement arms needed to convert any of the traditional blue based carbon EZ fletching jigs over to the shorter extreme helical mini style arms. Will fit either of the carbon right helical or carbon straight jigs. Lets you fletch short vanes up to 2 1/4� in length and carbon arrows 5/16� (.3125) diameter or shorter.
Perfectly applies three vanes or feathers at the same time and is available in right hand helical, left hand helical or straight fletch. Automatically adjusts to any arrow size from 1/4� to 3/8� in diameter.
Perfectly applies three vanes or feathers at the same time and is available in right hand helical, left hand helical or straight fletch. Automatically adjusts to any arrow size from 1/4� to 3/8� in diameter.
Perfectly applies three vanes or feathers at the same time and is available in right hand helical, left hand helical or straight fletch. Automatically adjusts to any arrow size from 1/4� to 3/8� in diameter.
Each die-case clamp is precision-ground to assure identical blade matching. Hollow recess allows for thumb and fingertip control preventing slippage in hand. Graduated scale at the rear of the base of the Clamp for consistent spacing of feathers and vanes.
Each die-case clamp is precision-ground to assure identical blade matching. Hollow recess allows for thumb and fingertip control preventing slippage in hand. Graduated scale at the rear of the base of the Clamp for consistent spacing of feathers and vanes.
Each die-case clamp is precision-ground to assure identical blade matching. Hollow recess allows for thumb and fingertip control preventing slippage in hand. Graduated scale at the rear of the base of the Clamp for consistent spacing of feathers and vanes.
Die cast jig frame with shaft cradle, permanent magnet, top and bottom adjustment dials, nock receiver index setting screws, nock receiver holding screws, and a standard nock receiver which determines the positioning of the fletching. Top and bottom adjustment knobs can be set to provide a straight fletch or to increase or decrease a diagonal fletch. Left and right clamps provide a left or right helical fletch. Feathers or vanes can be accurately spaced for 3-fletch-120, 4-fletch-75 X 105, 4- fletch-90, or 6-fletch-60. elect the standard straight, right, or left nock receiver when choosing your jig. Base and clamp sold separately.
Die cast jig frame with shaft cradle, permanent magnet, top and bottom adjustment dials, nock receiver index setting screws, nock receiver holding screws, and a standard nock receiver which determines the positioning of the fletching. Top and bottom adjustment knobs can be set to provide a straight fletch or to increase or decrease a diagonal fletch. Left and right clamps provide a left or right helical fletch. Feathers or vanes can be accurately spaced for 3-fletch-120, 4-fletch-75 X 105, 4- fletch-90, or 6-fletch-60. elect the standard straight, right, or left nock receiver when choosing your jig. Base and clamp sold separately.
Die cast jig frame with shaft cradle, permanent magnet, top and bottom adjustment dials, nock receiver index setting screws, nock receiver holding screws, and a standard nock receiver which determines the positioning of the fletching. Top and bottom adjustment knobs can be set to provide a straight fletch or to increase or decrease a diagonal fletch. Left and right clamps provide a left or right helical fletch. Feathers or vanes can be accurately spaced for 3-fletch-120, 4-fletch-75 X 105, 4- fletch-90, or 6-fletch-60. elect the standard straight, right, or left nock receiver when choosing your jig. Base and clamp sold separately.
Designed for fletching crossbow bolts and features a nock receiver that accepts all 22/64 diameter shafts with most end caps. The crossbow jig is indexed at 120 degrees for 3 fletch spacing. The crossbow jig also includes straight clamp for straight or offset fletching.
Crester features a sold hardwood base and variable speed dial to find the perfect rotational speed every time. Kit includes crester, (6) 1 oz. jars of Acry-Lac paint: black, red, yellow, blue, silver, and gold, and (4) paint brushes: hairline, 1/8�, 1/4�, and 1/2�.
Arrow dipping kit includes (1) glass dip tube with Dip’n Plug ring, (1) arrow hanger, (2) pints of white Acry-Lac, and (2) pints of clear Acry-Lac. Included dip tube can hold up to 4 arrows at a time and allows for a dip up to 11� long.
The only jig with a helical that is designed to fletch a 2� vane. Designed for standard 19/64� diameter carbon shafts, this jig will give you the perfect helical for the Blazer or any other 2� style vane. The Blazer jig has a pre-set 3 degree helical built into the clamp and the jig places 3 vanes 120 degree’s apart. Comes with jig, clamp and instructions.
The Cauldron Jig is a 3 vane advanced fletching system. It provides the right amount of pressure for excellent adhesion, and you can fletch all three vanes at once so it's a big time-saver. The snap-in inserts are easy to change and don't require tools, so you can switch from a three degree right helical to a one degree right in no time. With this jig you can leave the nock on your arrow so you don't need to change the center post - simply twist the dial at the bottom of the jig to rotate your arrow for perfect indexing. The Cauldron pressure ring is adjustable with a single twist to accommodate micro, standard, and large arrow diameters. Cleaning is easy: the inserts can be soaked in acetone for an hour to remove instant glue residue.
Tower fletching jig allows you to fletch all three vanes at once. Includes 7 sets of arms - Straight (Up to 4� vane), 1 degree offset (Up to 4� vane), 3 degree right helical (Up to 2.25� vanes), 1 degree offset (for Impulse vanes), 2 degree right wing feather, 2 degree left wing feather arms, and Mylar vane arms. Center posts for standard carbon, F nock, A nock, pin nock, HE nock, swedged shafts and crossbow bolts are also included. Three different clamping rings accept any size arrow shaft.
Bohning's Multi-Fletcher Jig includes 7 color-coded clamp inserts for different angles, from straight up to a 3 degree right or left helical. It works with all arrow diameters from X10s to 27s. The Multi-Fletcher can do a 3 or 4 fletch and will accommodate arrows with stand nocks or x-bow bolts. The rugged 16-gauge stainless steel base and durable composite clamps can be cleaned with acetone to remove adhesive residue. The unique snap-lock clamp plate with inserts provide superior adhesion force and consistent angles. Also includes a feather inserts, which is specifically designed to avoid damage to feathers. The stainless steel base can be screwed down to a work table as a single unit or as a multiple jig arrangement.
Fletching jig features a Quick-set magnetic clamp with larger clamp grips for easier operation, easy off-set adjustment, and accurate “snap� indexing.
Fletching jig features a Quick-set magnetic clamp with larger clamp grips for easier operation, easy off-set adjustment, and accurate “snap� indexing.
Tower fletching jig allows you to fletch all 3 vanes at once with a 3 degree helical or 1 degree right offset. Designed for shafts up to .350� in diameter.
Vertical fletching jig accommodates all standard carbon, small diameter carbon, large diameter carbon, and aluminum shafts up to 23/64� O.D. Designed to work with arrows that have a press fit nock system. Places 3 vanes on a 3 degree right helical at 120 degrees apart and includes two pressure rings allowing you to apply the perfect amount of pressure on different diameter shafts. Jig will only work with vanes up to 2 inches in length.
Tower fletching jig allows you to fletch all three vanes at once. Includes 3 sets of arms - Straight (Up to 4� vane), 1 degree offset (Up to 4� vane), and 3 degree right helical (Up to 2.25� vanes). Center posts for standard carbon, F nock, A nock, HE nock, pin nock, and crossbow bolts are also included. Two different clamping rings accept any size arrow shaft.
The fletcher may be easily adjusted with the furnished wrench for 120 degree three fletch or 75 by 105 four fletch. Large easy-to-turn indexing knob with zero index position mark. Nock receiver may be rotated to any position for precise placement of your nock in relation to the fletching. It will even allow placement of the cock feather down if desired or allow adjustment for best fletching clearance on a particular bow. The clamp is graduated for easy fletching placement in relation to the nock.
Will fletch 3 fletch 120 degree,4 fletch 75X150 degree,60X120 degree and 90X90 degree, cock fletch up, down out or any angle desired. Head is degreed using a CNC milling which is accurate to one ten thousandth of an inch, for setting both the fletch and nock angles. Indexable upper shafts support is designed to hold each size shafts from 12/64 to 27/64. Hardened indexing contact points for non-wearing accuracy. No ball bearings.
Will fletch 3 fletch 120 degree,4 fletch 75X150 degree,60X120 degree and 90X90 degree, cock fletch up, down out or any angle desired. Head is degreed using a CNC milling which is accurate to one ten thousandth of an inch, for setting both the fletch and nock angles. Indexable upper shafts support is designed to hold each size shafts from 12/64 to 27/64. Hardened indexing contact points for non-wearing accuracy. No ball bearings.
Will fletch 3 fletch 120 degree,4 fletch 75X150 degree,60X120 degree and 90X90 degree, cock fletch up, down out or any angle desired. Head is degreed using a CNC milling which is accurate to one ten thousandth of an inch, for setting both the fletch and nock angles. Indexable upper shafts support is designed to hold each size shafts from 12/64 to 27/64. Hardened indexing contact points for non-wearing accuracy. No ball bearings.
The GT Crossbow Arrow Fletcher will fletch crossbow arrows with flat nocks, moon nocks or no nock. The fletching kit includes base, 3-fletch indexer, lock down clips and 4 vane nests.
Compact, easy to use fletching tool designed with True Contact Design. This unique design concept ensures the shaft and vane mate together completely, consistently and accurately every time for a maximum bond regardless of the helical desired or shaft size. Fletches 3 or 4 fletch arrows and has four different offset configurations.
Glass filled nylon construction includes a 3x120 cock vane down fletch plate, a 3x120 cock vane out fletch plate and a 4x90 fletch plate and your choice of one fletching clamp. Clamp attaches to jig with a magnet, degree of offset is adjustable and a 15 degree rotation of the shaft can be made to choose how your arrow is nocked. Any Grayling clamp can be used with this jig. Order No
Glass filled nylon construction includes a 3x120 cock vane down fletch plate, a 3x120 cock vane out fletch plate and a 4x90 fletch plate and your choice of one fletching clamp. Clamp attaches to jig with a magnet, degree of offset is adjustable and a 15 degree rotation of the shaft can be made to choose how your arrow is nocked. Any Grayling clamp can be used with this jig. Order No
Glass filled nylon construction includes a 3x120 cock vane down fletch plate, a 3x120 cock vane out fletch plate and a 4x90 fletch plate and your choice of one fletching clamp. Clamp attaches to jig with a magnet, degree of offset is adjustable and a 15 degree rotation of the shaft can be made to choose how your arrow is nocked. Any Grayling clamp can be used with this jig. Order No
The Vane Master Pro is designed to fletch all arrow types with minimal adjustment. It will fletch from a 0 to a 5 degree helical both left and right and will fletch all vanes up to 4� in length, as well as, fletching both 3 and 4 fletch arrows. The Vane Master Pro is equipped with vane flat technology. This allows the base of your vane to lay perfectly flat every time using wires with a nonstick coating for clean fletching.
The Xbow Fletching Adapter is perfect for fletching any and all Xbow bolt types. It doesn’t matter if you’re using a flat nock, half moon nock, omni nock or no nock at all; this adapter is just for you. This unique design allows the adapter to spread apart, then compress back together using springloaded tension; to hold tight onto any and every crossbow bolt. It also has the ability to function on many different fletching jigs. This new adapter has an internal alignment pin to ensure the arrow sets straight inside the adapter while in use.
The Last Chance VMP Fletching Station holds all an archer's fletching tools in one area. It includes area for a fletching jig, glue, vanes, wraps, and other fletiching neccessities.
