Since 1998, eders.com has offered the largest selection archery and hunting equipment at the best prices. For even more savings on Archery and BowHunting Supplies, Join our Professional Bowhunter Buyer's Club, membership is NOW FREE for all.
Get Free Standard Shipping on all orders over $200.00. Just type: freeshipping in the coupon field during checkout.
Offers maximum surface area contact using 7075 aluminum to provide the most rigid connection to the bow possible. Bolt Lock System automatically micro drives parts apart when the bolt is loosened and prevents unwanted seizing. Laser etched marks for easy adjustment. Equipped with quick disconnect for side bar.
Centerlock quick disconnect with barrel nut allows you to remove your stabilizer quickly for transport and easy storage. The 0 degree disconnect keeps the stabilizer bar straight and centered and requires a 1-full turn counterclockwise of the stabilizer bar to remove. Internal nut mounts flush with the quick disconnect. Align the stabilizer rod logo right side up without fear of the stabilizer falling out, should it become slightly loose. Lessen wear on the threads of your bow riser. Includes 5/16�-24 stainless steel hardware and is CNC machined.
Centerlock quick disconnect with barrel nut allows you to remove your stabilizer quickly for transport and easy storage. The 16 degree offset is angled slightly downward to have a little lower front weight and requires a 1-full turn counterclockwise of the stabilizer bar to remove. Internal nut mounts flush with the quick disconnect. Align the stabilizer rod logo right side up without fear of the stabilizer falling out, should it become slightly loose. Lessen wear on the threads of your bow riser. Includes 5/16�-24 stainless steel hardware and is CNC machined.
Centerlock quick disconnect with barrel nut allows you to remove your stabilizer quickly for transport and easy storage. The 8 degree offset is angled slightly downward to have a little lower front weight and requires a 1-full turn counterclockwise of the stabilizer bar to remove. Internal nut mounts flush with the quick disconnect. Align the stabilizer rod logo right side up without fear of the stabilizer falling out, should it become slightly loose. Lessen wear on the threads of your bow riser. Includes 5/16�-24 stainless steel hardware and is CNC machined.
Adjustable vibration dampener system that allows you to adjust the strong proprietary rubber material will support up to 30oz weight max. By loosening the locking screw you twist the inner part of the dampener to set the tension to the amount of weights being used. The overall weight of the dampener is 2.7oz. When using 1-5oz weights loosen set screw rotate counter-clockwise all the way to stop position lock screw down, when using 5-10oz weights tighten clockwise 1 revolution to line 1 lock screw down, when using 10-30oz weights tighten clockwise 2 revolution line 2 lock screw down. Stock 5/16�-24 thread size.
Adjustable vibration dampener system that allows you to adjust the strong proprietary rubber material will support up to 30oz weight max. By loosening the locking screw you twist the inner part of the dampener to set the tension to the amount of weights being used. The overall weight of the dampener is 2.7oz. When using 1-5oz weights loosen set screw rotate counter-clockwise all the way to stop position lock screw down, when using 5-10oz weights tighten clockwise 1 revolution to line 1 lock screw down, when using 10-30oz weights tighten clockwise 2 revolution line 2 lock screw down. Stock 5/16�-24 thread size.
Adjustable vibration dampener system that allows you to adjust the strong proprietary rubber material will support up to 30oz weight max. By loosening the locking screw you twist the inner part of the dampener to set the tension to the amount of weights being used. The overall weight of the dampener is 2.7oz. When using 1-5oz weights loosen set screw rotate counter-clockwise all the way to stop position lock screw down, when using 5-10oz weights tighten clockwise 1 revolution to line 1 lock screw down, when using 10-30oz weights tighten clockwise 2 revolution line 2 lock screw down. Stock 5/16�-24 thread size.
Adjustable vibration dampener system that allows you to adjust the strong proprietary rubber material will support up to 30oz weight max. By loosening the locking screw you twist the inner part of the dampener to set the tension to the amount of weights being used. The overall weight of the dampener is 2.7oz. When using 1-5oz weights loosen set screw rotate counter-clockwise all the way to stop position lock screw down, when using 5-10oz weights tighten clockwise 1 revolution to line 1 lock screw down, when using 10-30oz weights tighten clockwise 2 revolution line 2 lock screw down. Stock 5/16�-24 thread size.
Adjustable off-set mounts to the lower riser mounting holes or to the front stabilizer hole when using a quick disconnect. TriLock features three raised boss taper surfaces on the male connector for a stronger connection. An added second lock from the AnchorGrip that adds biting teeth to give security that the bars will stay put. With the RodLock bar wedges against the riser to make it virtually impossible for the mount to rotate or drop. Includes one side rod CenterLock quick disconnect that allows you to add and remove your stabilizer quickly for transport and easy storage. Internal nut mounts flush with the quick disconnect. Laser engraved indicator lines for precise micro-adjustments. Includes 5/16�-24 stainless steel hardware. Ambidextrous for RH/LH use. CNC machined.
Adjustable v-bar mount with eyebolt offers micro-adjustments to angle the back bars up and down or side to side for proper stabilizer/v-bar balance. Attaches to front riser or v-bar extensions. TriLock features three raised boss taper surfaces on the male connector for a stronger connection. An added second lock from the AnchorGrip that adds biting teeth with easy angular adjustability. Includes two side rod Centerlok quick disconnects that allow you to add and remove your stabilizer quickly for transport and easy storage. Internal nut mounts flush with the quick disconnect. Laser engraved indicator lines for precise micro-adjustments. Includes 5/16�-24 stainless steel hardware. Ambidextrous for RH/LH use. Stainless steel eye bolt included for v-bar extension attachment and CNC machined.
The Axion Pro Side Bar Mount features fully adjustable tapered locking joints, laser etched lines for precise positioning and integrated quick disconnect for front and rear stabilizer. Constructed of CNC machined aluminum. Includes all mounting hardware.
Everything you need to get a freestyle stabilizer setup on your bow. Kit includes (1) Adjustable side bar mount, (1) Quick Disconnect, (1) 4 oz. end weight, (3) 1 oz. end weights, (1) 30� Competitor bar w/weights, (1) 12� Competitor side bar, and carrying tube.
This single block 8 oz. stainless steel end weight is designed for the archer who wants extra weight without having to stack multiple single weights on the bar. Maximum convenience, maximum balance and stability.
End weights designed to meet the exacting standards of the world’s leading archers. Provides maximum balance and stability for your Bee Stinger Stabilizer system. Available in 2 oz. and 4 oz. Black.
Allows archers to quickly and easily remove their stabilizer without damaging threads on the bow. 10 degree down angle allows the sight picture to settle down more quickly after coming to full draw.
Fabricated with exact same high performance materials as the B-Stinger stabilizers the quick disconnect makes for easy removal of your stabilizer. Comes in an anodized black matte finish.
Side arm mount that features an integrated quick disconnect for both the front and rear bars. Strong, simple, lighter, and easily disassembled for transport. Black.
Designed to hold a side bar and any amount of weight without losing rigidity. Machined teeth on both sides of the side bar elements assure a tight fit and no slip. Includes one quick disconnect for the side bar.
V-Bar mount that features integrated quick disconnects for the front stabilizer and rear v-bars. Strong, simple, lighter, and easily disassembled for transport. Black.
Allows the archer to run one or two side bars and adjust them up and down or in and out for customized balance. Machined teeth assure a tight fit and no slip.
Rock solid side bar mount fits left or right handed bows. Build from CNC machined aluminum with a positive locking clamp. Fits riser holes from 1/4�-1/2� diameter. Equipped with quick disconnect to save threads and allow the side bar to be removed in a quick 1/2 turn.
Weight set for Bowfinger stabilizers. Includes one each of 1 oz., 2 oz., 3 oz., and 4 oz. weights. Makes it easy to adjust in 1 oz. increments. 5/16-24 threads.
Side bar mount with positive-locking clamp design. Adjusts vertically and horizontally to any angle. Unique lock arm prevents any unwanted movement. Attaches to the riser with a 1/4-20 bolt through design.
Side bar mount with positive-locking clamp design. Adjusts vertically and horizontally to any angle. Features built in quick disconnects for front bar and side bar.
The Bowfinger Triad Mount features a great sense of versatility, as it offers 3 axis adjustments. The mount includes laser etched marks, which provide references for each axis and allow for precise adjustments when setting mount.
4-arm dampener helps dampen noise and vibration for your stabilizer. The only stabilizer module designed that has 4 arms with balls at the end for maximum stability and control. 5/16" x 24 thread, weights 2.25 ounces.
Fixed v-bar bracket made from lightweight aluminum with smooth, rounded curves. Accepts all 5/16”-24 stabilizers and side bars. Includes eye bolt for mounting.
Stabilizer mount bracket features Taper Lock system, built in quick disconnect and infinite angle adjustments with laser engraved position indicator. Able to be mounted on the front or back of the riser. Will not move from vibration or accidental bumps.
Stabilizer mount bracket features Taper Lock system, built in quick disconnect and infinite angle adjustments with laser engraved position indicator. Able to be mounted on the front or back of the riser. Will not move from vibration or accidental bumps.
Stabilizer end weight system for use with any Doinker stabilizer that accepts 1/4”-20 threaded weights. Includes 1 oz., 2 oz., and 4 oz. weights with set screw kit.
Allows the archer to fully adjust the flex/tension of the Doinker to absorb residual vibration in the stabilizer. Fits between the 421 weight system. 1/4”-20 threads.
Features Lug-Loc technology with a conicle bond for unlimited range of adjustment while providing superior strength. Threaded attachment for side bar. Includes eye bolt for front bar mounting.
Features Lug-Loc technology with a conicle bond for unlimited range of adjustment while providing superior strength. Threaded attachment for side bars. Includes eye bolt for front bar mounting.
Uses the same features as the Mighty Mount, but in a more compact configuration. Uses Lug-Loc technology with a conicle bond to allow unlimited range of adjustment while maintaining superior strength. Threaded connection for side bars.
Allows the archer to fully adjust the flex/tension of the Doinker to absorb residual vibration in the stabilizer. Fits between stabilizer weights. 1/4”-20 threads.
V-bar mount offers infinite adjustability with machined gears for solid lock down. Suitable for use on recurves and compounds. Includes stainless steel eye bolt.
The Multi-Angle is a strong, durable, front stabilizer quick disconnect offering adjustable angle setups from zero to twenty degrees in five degree increments. Angle adjustment is easy and tooless with marked settings.
This cap and stud is made just for holding your weights onto your stabilizers. The tungsten weights are not threaded, giving you the ability to easily take off, or add on, your tungsten weights with ease. You'll never again have to worry about getting stabilizer studs to align perfect with a large number of threaded steel weights. Hold up to 30oz. of weight using the 3" threaded stud included.
These weights are the same size overall as a standard 1oz. stainless steel weight but weigh 3oz. This gives you the ability to cut down on your weight length which then cuts down your overall stabilizer length as a whole. These weights are not threaded and require the weight cap and stud. The weights are sold individually.
Made from NAVCOM material with Broadband Technology to dampen a wide range of vibration frequencies. Screws onto the end of any stabilizer with 5/16�-24 thread mount.
Made from NAVCOM material with Broadband Technology to dampen a wide range of vibration frequencies. Screws onto the end of any stabilizer with 5/16�-24 thread mount.
The FW1 Stabilizer Enhancer Node utilizes double Broadband design to greatly reduce vibration and help your bow settle faster for a smoother shot. Can be used with any stabilizer that has a 5/16" thread mount. You can add as much weight as you want, weights sold seperately. Diameter: 1.65", weight: 1.6 oz.
Adds 5.6 oz. of weight to the front of your stabilizer to help keep your bow steady and eliminate vibration on the shot. Additional 5/16"-24 weights can be added for a customized feel. Includes (2) 1 oz. weights, additional weights sold separately.
The FW1 Stabilizer Enhancer Node utilizes double Broadband design to greatly reduce vibration and help your bow settle faster for a smoother shot. Can be used with any stabilizer that has a 5/16" thread mount. You can add as much weight as you want, weights sold seperately. Diameter: 1.65", weight: 1.6 oz.
Adds 5.6 oz. of weight to the front of your stabilizer to help keep your bow steady and eliminate vibration on the shot. Additional 5/16"-24 weights can be added for a customized feel. Includes (2) 1 oz. weights, additional weights sold separately.
The FW1 Stabilizer Enhancer Node utilizes double Broadband design to greatly reduce vibration and help your bow settle faster for a smoother shot. Can be used with any stabilizer that has a 5/16" thread mount. You can add as much weight as you want, weights sold seperately. Diameter: 1.65", weight: 1.6 oz.
The FW1 Stabilizer Enhancer Node utilizes double Broadband design to greatly reduce vibration and help your bow settle faster for a smoother shot. Can be used with any stabilizer that has a 5/16" thread mount. You can add as much weight as you want, weights sold seperately. Diameter: 1.65", weight: 1.6 oz.
The 720 single mount features 360 degree adjustability, engraved indexing lines, anodized aluminum body and powerful taper fit joints. Left offest is for right hand shooters, right offset for left hand shooters.
The 720 single mount features 360 degree adjustability, engraved indexing lines, anodized aluminum body and powerful taper fit joints. Left offest is for right hand shooters, right offset for left hand shooters.