Since 1998, eders.com has offered the largest selection archery and hunting equipment at the best prices. For even more savings on Archery and BowHunting Supplies, Join our Professional Bowhunter Buyer's Club, membership is NOW FREE for all.
Get Free Standard Shipping on all orders over $200.00. Just type: freeshipping in the coupon field during checkout.
Archery paper tuning system that assures proper arrow flight. Gives easy step-by-step archery tuning tips. Lightweight and portable for use anywhere. Includes tuning station and 10 sheets of “how to� tuning paper.
The Accubow is designed to increase pulling poundage and eliminate target panic all while improving holding stability and increasing shooting stamina. Featuring 10-70lb adjustability for draw lengths from 21"-34". The Accubow includes a laser sight stabilization system and has unlimited dry-fire capabilities. Included D loop for training with a release aid.
The AccuBow 2.0 is a virtual archery practice system with an adjustable 10-70 lbs of pulling resistance. Features include a foldable limb design for easy travel and a phone mount for easy use of the AccuBow app. The AccuBow has a real bow string center with D-loop tied on (can be cut for recurve) and has an ambidextrous design for both left and right-handed users. App shooting modes include target shooting, bowfishing, bowhunting, build-your-own range, treestand hunting, dangerous game, and archery golf.
The AccuBow Nano is a virtual archery practice system for kids and beginners with an adjustable 5-45 lbs of pulling resistance. Compatible with the AccuBow app, this trainer provides virtual shooting modes for target shooting, bowhunting, bow fishing, build-your-own range, treestand hunting, dangerous game, archery golf, and more. Customize the shooting settings for realistic training.
The AccuBow Nano is a virtual archery practice system for kids and beginners with an adjustable 5-45 lbs of pulling resistance. Compatible with the AccuBow app, this trainer provides virtual shooting modes for target shooting, bowhunting, bow fishing, build-your-own range, treestand hunting, dangerous game, archery golf, and more. Customize the shooting settings for realistic training.
The molded-plastic lock protects your compound bow from dry fires by preventing it from being drawn. It’s adjustable to most limb dimensions, and fits most compound bows and crossbows. It’s also a great theft deterrent, and great for states that legally require bows to be secured when out of the field.
The molded-plastic lock protects your compound bow from dry fires by preventing it from being drawn. It’s adjustable to most limb dimensions, and fits most compound bows and crossbows. It’s also a great theft deterrent, and great for states that legally require bows to be secured when out of the field.
Hanging bow scale that measures peak weight or holding weight and has a 100 lb. capacity. Features an illuminating screen and a compact design for easy storing. Operates on (2) AAA batteries (not included).
Designed to fit all parallel and standard limb bows, the American Archery Products Bow Vise features 360 degree rotation on two separate axis knobs. The vise also includes a powder coat finish.
For use with Bow Draw Winch. Allows the bow to pivot up and down to check 3rd axis. Heavy-duty steel construction design. Disassembles for easy storage.
Draw winch can be easily mounted on a bench, table, or used with the Bow Draw Pro stand (sold separately). Works with bows up to 90 lbs. draw weight. Great for checking draw length and cam timing.
Paper tuning fixture that mounts to the wall. Folds against the wall to save space when not in use. Will handle paper rolls up to 26� wide. Includes 18�x75 ft. paper roll.
Make bow set up a breeze and takes the guess work out of nock positioning. The string level checks vertical and horizontal position of the bow for nock and sight installation.
The Bow Hand is made with lightweight yet durable materials. All adjustment points feature quick release clamps that lock your bow in place. The Bow hand clamp rotates 360 degrees with locking gears for easy access to every part of your bow. Works with any bow or crossbow. Can be mounted to any bench.
The Bow Hand is made with lightweight yet durable materials. All adjustment points feature quick release clamps that lock your bow in place. The Bow hand clamp rotates 360 degrees with locking gears for easy access to every part of your bow. It can be used anywhere you like with the telescoping stand which adjusts from 41� to 75�. Works with any bow or crossbow.
With all the capabilities of a full size bow press yet it is lightweight and compact. The Bow Medic Portable Bow Press allows you to make a full range of adjustments and repairs at home or in the field.
The EZ Laser Tuner Tool is extemely fast and accurate to use. The adjustable clamp easily attaches to the top cam of the bow. It directs the laser downward to reveal the centershot of the bow which will then determine the exact placement of the arrow rest in relation to the cam and string.
The Field Press is portable, durable, and easy to use for adjustments on the go. This press allows you to change your bowstring, tie in a peep, change draw length positions and more. Designed to work with both standard limb and past parallel bows. The dual position ratchet strap makes pressing and un-pressing the bow easy. Features a micro-tune tension release for precise adjustments.
The Bow Medic Level Box has Angle Sensor Technology that can find the angle of either your arrow or string to make precise bow set ups every time. The large display screen provides easy digital reading. Includes (1) AAA battery.
The G2 press has a 6" Jackscrew which has two benefits. The first is that it allows the Bowmaster Portable Bow press to be used on shorter axle to axle bows, which is even more important when using the new longer Split Limb L Brackets G2. The second benefit is that it allows for the complete tear down of bows with high pre-loaded limbs. The Bowmaster Portable Bow Press puts all the capabilities of a full size bow press in the palm of your hand. The Bowmaster is small enough to fit easily into your pack or even your pocket, making it a truly portable bow press. The Bowmaster portable bow press allows the pro shop or archer to easily replace the string or cables, install peep sights, adjust draw length, replace wheels or cams or replace the limbs.
Double bow hanger made from cold-rolled steel with a powder-coat finish easily attaches to slat wall. Screws may be added for additional security. Holds bows 6" from the wall and has a 12" crossbar.
Two-arm crossbow hanger made from cold-rolled steel with a powder-coat finish mounts ceiling joists and hangs crossbow 10" from the ceiling with 4" spacing between the bars to quickly and easily display or hold crossbows. Mounting hardware included.
Two-arm crossbow hanger made from cold-rolled steel with a powder-coat finish easily attaches to slat wall without additional screws or mounting and is 6" in length with 4" spacing between the bars to quickly and easily display or hold crossbows.
A crossbow hanger made from cold-rolled steel with a powder coat finish that won’t damage bows. Mounts to wall studs and extends outwards 6� from the wall. Includes mounting hardware with snap-on covers for a professional finished look.
Excellent for holding insert securely while hot melt or epoxy is applied. Helps prevent glue from getting into the insert opening. Approximately 5" long to keep hand away from heat.
Allows 2nd and 3rd axis sight leveling for accurate shooting in uneven terrain. Works with target and hunting sights. Portable design can be used on any surface without the need to bolt it down.
Allows you to quickly and easily find the proper nock point for any diameter arrow. Two piece set includes magnetic attachment for bow string and slide-on arrow level.
Directly replaces the sunshades on Caldwell Ballistic Precision Chronograph. Can be used indoors with lights on, or outdoors with lights off. Runs on (2) AA batteries or a wall outlet.
The Ballistic Precision Chronograph provides accurate velocity measurements across a wide range of shooting conditions. Higher accuracy was achieved by using a high speed 48 MHz processor and by designing a circuit with an advanced data interface that allows each unit to be computer calibrated at the factory after assembly. Provides much better accuracy than other chronographs on the market. Although technologically advanced, the unit is designed to be simple to operate, displaying velocity in feet per second or meters per second on the large built in LCD screen. The Chrono can also deliver the shot string velocity data through the 15' foot audio jack cable (included) to a smartphone or mobile device.
Caldwell Ballistic Precision Chronograph Premium Kit contains everything you need to capture reliable velocity data in one convenient kit. Includes Chronograph, IR LED Light Kit, Tripod and Custom Carry Case that conveniently holds all items. The Ballistic Precision Chronograph provides accurate velocity measurements across a wide range of shooting conditions. Higher accuracy was achieved by using a high speed 48 MHz processor and by designing a circuit with an advanced data interface that allows each unit to be computer calibrated at the factory after assembly. Provides much better accuracy than other chronographs on the market. Although technologically advanced, the unit is designed to be simple to operate, displaying velocity in feet per second or meters per second on the large built in LCD screen. The Chrono can also deliver the shot string velocity data through the 15' foot audio jack cable (included) to a smartphone or mobile device.
The VelociRadar Alpha Chronograph provides ballistic information for shooters to track performance and results. This radar activated chronograph can be used to track bullet velocity as well as pattern shotguns. This chronograph is not sensitive to light and does not require the need to setup down range. Compatible with the new Caldwell app. Powered by a rechargeable Li-Ion battery.
The VelocRadar Chronograph provides ballistic information for shooters to track performance and results. This radar activated chronograph is not sensitive to light and does not require the need to setup down range. Compatible with the new Caldwell app. Powered by a rechargeable Li-Ion battery.
The perfect tool for the home or the shop, the CX digital bow scale measures peak weight and holding weight in ounces, pounds and kilograms. Easy-to-use with a large LED display screen with strong and durable construction that features a steel hook that can attach to a D-loop or string to measure peak bow weights up to 90-pounds.
One of the keys to accuracy is consistency in weight across your arrows. The closer your arrows and components are in weight the more consistent they’ll be. Perfect for weighting arrow, points, nocks, inserts, fletching or full shafts. Compact, lightweight and easy to use this unit is accurate to within .15 of a grain and measures in grains, ounces, grams, & more all displayed on a bright and easy to read LCD screen.
Multi-use pliers pre-stretch d-loops, tighten d-loops to string, open nock sets, and install nock sets in two different sizes. Features heavy-duty large grip for increased comfort.
Indoor Light System attaches to any ProChrono for use indoors. Uses infrared LED technology to eliminate the need for light bulbs. Simply attach to the chronograph guide wires and plug in the power source, and you are ready to go.
Padded carrying case for all ProChrono chronographs. Features a velcro divider compartment for storage of guide wires,diffuser hoods,batteries,indoor lighting system.Sturdy handle.Chronograph and accessories not included.
The ProChrono DLX features built in Bluetooth connectivity for use with mobile and desktop apps and more accurate measurements with a faster internal shot clock. The DLX is based of the ProChrono Digital design with an intuitive button interface, on board memory, and statistics. The included diffuser hoods allow for outdoor use.
The new generation of the popular ProChrono model based on a time proven design that has been measuring "almost anything that since since 1985! Great for firearms,shotguns,archery,airguns,and paintball. Everything is included for indoor use.Requires one 9volt alkaline battery(not included).
The Coop's Spine Tester allows an archer to index tehir arrows so the spine is at the top of the shaft for increased consistency and flight. The tester uses spring tension over dead weight for a more consistent and accurate reading. Also incorporates a built in arrow spinner so an archer can tune their broadheads.
Comes with complete instructions and one roll of freezer paper. Spring tension holds paper tight. Free standing. 20" X 18" shooting face uses 18" freezer paper. Used for fine tuning. Used to check arrow flight after release and to determine if a shaft is stiff or weak.
Made from rigid 1” steel tubing welded to a 3” wall plate. This display consists of 3 brackets: 12”, 7”, and 3.5”. Bow hooks are 4” wide with vinyl tips for protection. Brackets also have screw holes so they can be permanently attached to the wall.
Ideal for shops with limited floor space. This display holds 10 bows firmly by their upper limb and is adjustable to accommodate any 10 bows with the same limb style and is 48� long. Mounting brackets are included that can be attached to 16� or 24� center wall studs or ceiling joists. The bow holders are vinyl covered for bow protection.
Archery trainer device that easily adjust to archers of any skill level or size. Provides up to 60 lbs resistance for increased muscle memory and can be used with your own release aid to practice proper shot execution. Archers can also add weight to the trainer or bolt on a sight to make it feel even more like the real thing. Ambidextrous design.
Enables all archers to adjust their target and hunting sight for 1st, 2nd and 3rd axis to achieve the maximum accuracy for any shot angle and distance.
Enables all archers to adjust their target and hunting sight for 1st, 2nd and 3rd axis to achieve the maximum accuracy for any shot angle and distance. Includes instructional DVD.
The all new GEN2PRO Third Axis Level is designed to help aid you in the proper set up of your archery equipment. With a light-weight aluminum construction, the GEN2PRO is just as durable as it is accurate. The built-in string groove and circular turret level allow you to quickly level your bow in a bow vise referencing both the X and Y axis without the need to adjust your level. Featuring Hex Drive Technology, the GEN2PRO’s compact sliding design easily mounts to the riser, dovetail, or sight rail of both hunting and target sights for leveling your 1st, 2nd and 3rd axis. Mounting the GEN2PRO directly to the sight allows you to set your 3rd axis at full draw, factoring in any natural bow/grip torque that occurs when tension is transferred from cables to the bow. This natural torque occurs on all bows and is overlooked with static sight leveling systems. All of these features make the GEN2PRO our most versatile level yet. With its slim design the GEN2PRO is 23% shorter than previous models and can easily fit in your tacklebox, bow case, or quiver.
The HTM Precision Bow Vise is used for setting up bows, specifically for shooting uphill or downhill. The up and downhill is the 3rd axis setting on your site. The HTM Bow Vise has a built-in leveling device. Once attached to a permanent structure, the upper housing has a patented leveling system. This patented system allows for accuracy in the leveling of the upper housing and rotating bar. The rotating bar is parallel to the top of the upper housing to within .001. Once the upper housing and rotating bar are level in 2nd axis, the bow is attached to the rotating bar with a 5/16�-24 threaded handle. By rotating the gear-driven handle 45 degrees downward, your sight level should not move. Then do the opposite. If the level is off, the vise will assist you in making the appropriate corrections.
The QC-2020 is solely designed for both bow vises, the HTM 3rd Axis bow vise and the new HTM BVS-2020 Vise. This clamp gives you a 3 3/8� limpades. It will attach to the limbs of any bow quickly thus ensuring no harm comes to the bow. The quick clamp is easy to attach to both HTM Bow vises. The QC-2020 is made of all high-grade aluminum for strength and lightness.
The HTM Set-Up Master is manufactured to create 2nd axis leveling, thus ensuring complete accuracy. It takes all the guess work out of setting up your own bow and sight. Works well with the 3rd axis bow vise.
This vise will rotate your bow 360 degrees and has an unforgiving lock-down with no creep. This feature allows you to position a bow at any angle. Additionally, the BVS-2020 offers a ¾� steel shaft bow holder mounted in oil lite bearings that never bind up or need oil. Further, its Aluminum housing is precision bored for alignment. Does not include Quick Clamp limb clamp.
The K’Netix Newton Bow Scale is designed to be used with most bow and crossbows. This scale maxes out at 220lbs and has a digital read out for easy use.
The Arrow Squaring Disc is a 120 grit replacement disc originally designed for the LCA Revolution Arrow Saw, but can mount to other shaft squares with a peel-and-stick design.
This kit is loaded with a wide variety of screws, bolts, stabilizer studs, e-clips, bolt spacers, cam spacers and much more in a wide assortment of shapes and sizes. Whether at home or on the tournament trail, you never know when you might need that one replacement part that this kit can supply. Kit contains 310 pieces.
The Bow Scale 2 will not only read/lock on peak weight, but it’ll also read/lock on holding weight all while drawing your bow only one single time to achieve both readings. This scale’s equipped with an LED digital display, a reinforced welded ring plus a strong and durable steel hook which attaches to your D-Loop with ease. This scales max weight is 110lbs.
The LCA 3' Cut-Off Wheel has reinforced silicon carbide construction was originally designed for the LCA Revolution Arrow Saw, but will fit saws with a 1/2" arbor mounting hole and a 3" diameter blade.
The Last Chance Double Bright Light is designed to be used when building arrows. It can be attached to a fletching jig or the edge of the table with the included clamp.
The all new LCA Draw Board is the perfect tool, adaptable to all Last Chance presses, for tuning your bow to perfection. Check your timing, draw length, cam lean and set your rest with more precision than ever. For use on all presses EXCEPT the two Ultimate presses.
The all new LCA Draw Board is the perfect tool, adaptable to all Last Chance presses, for tuning your bow to perfection. Check your timing, draw length, cam lean and set your rest with more precision than ever. For use on both of the Ultimate presses.
The EZ Green Vise is economical, EZ operation and made to aid in your bow setup from start to finish. It features 360 degree rotation on both it's axis adjustments. Also, the ability to move forward and back and side to side.
The EZ Vise is designed for quick and easy operation. Made to adjust, move and lock into any position possible. Used to be your 3rd hand to hold your bow while you setup different parts on your bows setup.
Fully interchangeable with any Last Chance Press. Install by cutting the current pieces off of your fingers and then slide these new custom molded caps into place.
The HS3 is a highly precise, accurate, consistent and dependable scale weighing draw weight, luggage, fish and more up to 110 pounds displaying lbs. and kg on the LED readout. Other features include peak/hold measurements and a hook designed for string loop attachment.
The Last Chance Mag Bright 5x Magnifier is designed to attach to a table, bow press, or any other surface. It will brighten and magnify your work area.
The Mag Strip is a great organizational addition to bow presses and workbenches holding tools and accessories in place. The large magnetic surface attaches to any metal surface.
The Mini Xbow Adapter is specifically made for pressing crossbows that are under 12� axle to axle. With this easy to use adapter you can press crossbows down to 5� axle to axle. This adapter will only fit the LCA Ultimate EZ, Ultimate EZ Deluxe and EZ Green Xbow Presses.
The Last Chance Precision Arrow Prep Kit is perfect for any archer who builds their own arrows. The kit includes brushes, swabs, a deburring tool, a handle, and a case.
Digital grain scale features a durable and convenient touch screen, auto calibration and auto turn off after 60 seconds. Precise and accurate, measures up to 3000 grains. Perfect for weighing arrows, points, broadheads or vanes.
The PRO parts kit is a 3 box set loaded with a variety of screws, bolts, stabilizer studs, washers, cam spacers, e-clips, bolt spacers and much more in large assortment of sizes. It’s the perfect kit that will supply the lost part you can never seem to find. Each box is equipped with a guide that will tell you the exact size and name of each part that's inside the kit. Kit includes a thread gauge, basic parts kit with 310 pieces, parts kit 2 with 85 pieces and parts kit 3 with 45 pieces for a total of 440 pieces.
The Last Chance Quick Clip is designed to hold the ends of strings and cables while you tuning your bow to keep them from unwinding. The unit can be mounted to your bow press using the magnet or universal clamp.
This tool combines the convenience of the standard Hex Key "SET" with the uniqueness of "stubby" Hex Keys. This tools explicitly made for reaching screws inside tight spots. Other ReachIt Wrench features include a hex bit socket that can hold any standard hex bit, an assortment of hex bits, and a carrying case. The ReachIt Wrench "SET" is perfect for working with your equipment, in your workshop, around your home, or throughout your day to day activities.
The Revolution Arrow Saw helps reduce carbon dust plus provide a combination of essential tools for arrow construction. Features include a water drip and vacuum attachment, blade and motor housing, deburr, shaft square, mop, brush, broadhead wrench and a built-in arrow spinner.
The Last Chance Revolution Arrow Tuner allows an archer to square their arrow, check the arrow straightness, tune broadheads, and correct misalignment between arrow components.
Use the wheel kit to put your press on wheels and have the ability to move it anywhere in your shop with ease. This kit includes 4 wheel attachments and 4 thumb screws to lock each one into place inside your stand. Fits all Last Chance floor stands.
Western Recreation’s Recurve Rack provides easy storage of recurve bows. This rack mounts to any wall and has 3 hooks for storing up to 3 different bows. The heavy leather construction provides a classic look to display your bows.
Designed for precision squaring of arrow shafts for increased accuracy. Also removes non-conductive material from the end of the shaft for improved performance with Lumenok lighted nocks.
A great training aid that can worn at all times. It insures proper hand placement, installs confidence, eliminates grip torque and allows for tighter arrow groups. Constructed of a padded nylon shell with elastic finger loops.
A great training aid that can worn at all times. It insures proper hand placement, installs confidence, eliminates grip torque and allows for tighter arrow groups. Constructed of a padded nylon shell with elastic finger loops.
The Archery Tech Tool Pro Kit provides essential tools for bow setups, tuning and advanced bow maintenance. Outfitted inside the Tech Tool Bag are some of OMP's professional grade tools for skilled archery Technicians. Kit Includes: hex sets 0.05" - 1/4" , torx set T9-T40, multi pliers, nock pliers, serving jig, bow square, bow level, arrow level, accu-arrow scale, string serum.
This starter kit contains the essential tools for basic bow maintenance and tuning. Outfitted inside the Tech Tool Bag are some of OMP's professional grade tools for archery Technicians of all skill levels. Kit Includes: hex sets 0.05" - 1/4" , multi pliers, bow square, bow level, arrow level, string serum.
The Axis Sight Leveler universally assists in tuning sight bars and scopes for precision adjustment of the 1st, 2nd, and 3rd sight axis. The 6,000 series machined aluminum sight leveler is custom fit to integrate with any Versa-Cradle clamp. For those without a Versa-cradle, the flat surface of the sight leveler accommodates any C-Clamp. The three set screws allow for easy adjustment to bring your sight to level status before making axis adjustments.
The OMP Cinch D Loop Plier makes tying D loops of any size easy. Designed with two notches; one for smaller pin nocks and one for regular-sized nocks. The spring-loaded handle makes this tool versatile and easy to use. Also includes an indent on the side of the tool for burning consistent loop ends.
The Freehand Arrow Level features one hand operation for easy installation to arrow shaft. Works with all arrow shaft diameters. Indicates when arrow is 90 degrees from a level string.
