Since 1998, eders.com has offered the largest selection archery and hunting equipment at the best prices. For even more savings on Archery and BowHunting Supplies, Join our Professional Bowhunter Buyer's Club, membership is NOW FREE for all.
Get Free Standard Shipping on all orders over $200.00. Just type: freeshipping in the coupon field during checkout.
A lower profile, shorter version of the original Blazer vane but designed for target and spot shooter's. With its flat trajectory, low profile and less wind drift it is the most accurate vane.
A lower profile, shorter version of the original Blazer vane but designed for target and spot shooter's. With its flat trajectory, low profile and less wind drift it is the most accurate vane.
A lower profile, shorter version of the original Blazer vane but designed for target and spot shooter's. With its flat trajectory, low profile and less wind drift it is the most accurate vane.
Designed specifically for use with crossbows to withstand higher velocities and stabilize short crossbow bolts up to 100 yards. Made from a stiffer vane material than standard vanes. Length: 3.5�, Profile: .5�, Weight: 11.5 gr.
Everything you need to go bowfishing except the bow. Kit includes 1 MUDCAT reel, 1 glass fish arrow with river fish point, AMS safety slide and 50 feet of 80 pound test line. Great for beginners.
Water-based Crest-Lac paints produce a glossy, durable finish and improves fletching adhesion. Formulated specifically for cresting and dipping arrows, with optimal flow and leveling so brush marks don't show when dry, and non-bleeding properties that achieve crisp edges on even the finest cresting stripes. A new coating technology that prevents Crest-Lac from separating as quickly as other water-based paints, also allowing Crest-Lac to be easily mixed back to a perfect consistency. Crest-Lac is an acrylic, water-based paint (no VOC) that dries in 24-36 hours, depending on the humidity present in the drying area. Safe for Air, Ocean, or Ground transport. Pro Tip: If thinning use distilled water NOT paint thinner.
Water-based Crest-Lac paints produce a glossy, durable finish and improves fletching adhesion. Formulated specifically for cresting and dipping arrows, with optimal flow and leveling so brush marks don't show when dry, and non-bleeding properties that achieve crisp edges on even the finest cresting stripes. A new coating technology that prevents Crest-Lac from separating as quickly as other water-based paints, also allowing Crest-Lac to be easily mixed back to a perfect consistency. Crest-Lac is an acrylic, water-based paint (no VOC) that dries in 24-36 hours, depending on the humidity present in the drying area. Safe for Air, Ocean, or Ground transport. Pro Tip: If thinning use distilled water NOT paint thinner.
A solvent based paint formulated for dipping and cresting and used to customize aluminum, wood or carbon that dries to a hard chip-resistant finish. Dries on all shafts within a 24 hour period and improves fletching adhesion. Comes in convenient 1 oz. jar for easy storage. Thin with Fletch-Lac thinner for better consistency.
A solvent based paint formulated for dipping and cresting and used to customize aluminum, wood or carbon that dries to a hard chip-resistant finish. Dries on all shafts within a 24 hour period and improves fletching adhesion. Comes in convenient 1 oz. jar for easy storage. Thin with Fletch-Lac thinner for better consistency.
A solvent based paint formulated for dipping and cresting and used to customize aluminum, wood or carbon that dries to a hard chip-resistant finish. Dries on all shafts within a 24 hour period and improves fletching adhesion. Comes in convenient 1 oz. jar for easy storage. Thin with Fletch-Lac thinner for better consistency.
A solvent based paint formulated for dipping and cresting and used to customize aluminum, wood or carbon that dries to a hard chip-resistant finish. Dries on all shafts within a 24 hour period and improves fletching adhesion. Comes in convenient 1 oz. jar for easy storage. Thin with Fletch-Lac thinner for better consistency.
A solvent based paint formulated for dipping and cresting and used to customize aluminum, wood or carbon that dries to a hard chip-resistant finish. Dries on all shafts within a 24 hour period and improves fletching adhesion. Comes in convenient 1 oz. jar for easy storage. Thin with Fletch-Lac thinner for better consistency.
A solvent based paint formulated for dipping and cresting and used to customize aluminum, wood or carbon that dries to a hard chip-resistant finish. Dries on all shafts within a 24 hour period and improves fletching adhesion. Comes in convenient 1 oz. jar for easy storage. Thin with Fletch-Lac thinner for better consistency.
A solvent based paint formulated for dipping and cresting and used to customize aluminum, wood or carbon that dries to a hard chip-resistant finish. Dries on all shafts within a 24 hour period and improves fletching adhesion. Comes in convenient 1 oz. jar for easy storage. Thin with Fletch-Lac thinner for better consistency.
Manufactured to be extremely consistent from point to point. Every point is guaranteed to pass the test for legal use in NFAA and World Archery events with an impressive weight tolerance of only 0.25 grains. The max OD of these large diameter pins pushes the limits of line cutting performance, but will always be legal for competition.
Manufactured to be extremely consistent from point to point. Every point is guaranteed to pass the test for legal use in NFAA and World Archery events with an impressive weight tolerance of only 0.25 grains. The max OD of these large diameter pins pushes the limits of line cutting performance, but will always be legal for competition.
Manufactured to be extremely consistent from point to point. Every point is guaranteed to pass the test for legal use in NFAA and World Archery events with an impressive weight tolerance of only 0.25 grains. The max OD of these large diameter pins pushes the limits of line cutting performance, but will always be legal for competition.
The Griffin Vane is designed specifically for olympic recurve archers. The twisted ribbon design aids in immediate arrow rotation and the minimal surface area resulting from the cut-out profile provides a stable & accurate flight in variable, constant, and zero wind shooting scenarios. Weighing 1.2 grains the Griffin can be fletched with a standard Pro Class Style Jig using glue or tape.
The Griffin Vane is designed specifically for olympic recurve archers. The twisted ribbon design aids in immediate arrow rotation and the minimal surface area resulting from the cut-out profile provides a stable & accurate flight in variable, constant, and zero wind shooting scenarios. Weighing 1.2 grains the Griffin can be fletched with a standard Pro Class Style Jig using glue or tape.
The Griffin Vane is designed specifically for olympic recurve archers. The twisted ribbon design aids in immediate arrow rotation and the minimal surface area resulting from the cut-out profile provides a stable & accurate flight in variable, constant, and zero wind shooting scenarios. Weighing 1.2 grains the Griffin can be fletched with a standard Pro Class Style Jig using glue or tape.
The Griffin Vane is designed specifically for olympic recurve archers. The twisted ribbon design aids in immediate arrow rotation and the minimal surface area resulting from the cut-out profile provides a stable & accurate flight in variable, constant, and zero wind shooting scenarios. Weighing 1.2 grains the Griffin can be fletched with a standard Pro Class Style Jig using glue or tape.
The Griffin Vane is designed specifically for olympic recurve archers. The twisted ribbon design aids in immediate arrow rotation and the minimal surface area resulting from the cut-out profile provides a stable & accurate flight in variable, constant, and zero wind shooting scenarios. Weighing 1.2 grains the Griffin can be fletched with a standard Pro Class Style Jig using glue or tape.
The Griffin Vane is designed specifically for olympic recurve archers. The twisted ribbon design aids in immediate arrow rotation and the minimal surface area resulting from the cut-out profile provides a stable & accurate flight in variable, constant, and zero wind shooting scenarios. Weighing 1.2 grains the Griffin can be fletched with a standard Pro Class Style Jig using glue or tape.
The Griffin Vane is designed specifically for olympic recurve archers. The twisted ribbon design aids in immediate arrow rotation and the minimal surface area resulting from the cut-out profile provides a stable & accurate flight in variable, constant, and zero wind shooting scenarios. Weighing 1.2 grains the Griffin can be fletched with a standard Pro Class Style Jig using glue or tape.
The Griffin Vane is designed specifically for olympic recurve archers. The twisted ribbon design aids in immediate arrow rotation and the minimal surface area resulting from the cut-out profile provides a stable & accurate flight in variable, constant, and zero wind shooting scenarios. Weighing 1.2 grains the Griffin can be fletched with a standard Pro Class Style Jig using glue or tape.
The Griffin Vane is designed specifically for olympic recurve archers. The twisted ribbon design aids in immediate arrow rotation and the minimal surface area resulting from the cut-out profile provides a stable & accurate flight in variable, constant, and zero wind shooting scenarios. Weighing 1.2 grains the Griffin can be fletched with a standard Pro Class Style Jig using glue or tape.
This Arrow wrap is designed to complement Blazer vane by providing increased arrow visibility. Wraps are 4� long and 1.125� wide, each package contains 13 wraps.
This Arrow wrap is designed to complement Blazer vane by providing increased arrow visibility. Wraps are 4� long and 1.125� wide, each package contains 13 wraps.
This Arrow wrap is designed to complement Blazer vane by providing increased arrow visibility. Wraps are 4� long and 1.125� wide, each package contains 13 wraps.
This Arrow wrap was designed to complement Blazer vane by providing increased arrow visibility. Wraps are 4" long and 1.125" wide, each package contains 13 wraps.
Stainless steel screw-in bullet points feature an oversized contour that is slightly larger than the shaft for added protection during target entry, while 1/64" size increments result in a flush fit between shaft and point for smooth arrow removal. Each point size and weight has a unique profile to achieve superior aerodynamic flight. Critical tolerances are held to the highest standards to ensure maximum consistency and concentricity.
Stainless steel screw-in bullet points feature an oversized contour that is slightly larger than the shaft for added protection during target entry, while 1/64" size increments result in a flush fit between shaft and point for smooth arrow removal. Each point size and weight has a unique profile to achieve superior aerodynamic flight. Critical tolerances are held to the highest standards to ensure maximum consistency and concentricity.
Shield cut vane designed for field and FITA style archery competition. Made from Blazer vane material for durability. Length: 1.75�, Profile: .375�, Weight: 3.5 gr.
Shield cut vane designed for field and FITA style archery competition. Made from Blazer vane material for durability. Length: 1.75�, Profile: .375�, Weight: 3.5 gr.
Shield cut vane designed for field and FITA style archery competition. Made from Blazer vane material for durability. Length: 1.75�, Profile: .375�, Weight: 3.5 gr.
Shield cut vane designed for field and FITA style archery competition. Made from Blazer vane material for durability. Length: 1.75�, Profile: .375�, Weight: 3.5 gr.
The Smooth Release Insert Nock is designed specifically for target archers and fits Uni-Bushing or standard sized arrows with a .246” ID. It is engineered using a single click design to give you the ultimate accuracy, and weighs 7.0 grains. Has raised index.
Bohning X3 Vanes feature a shield cut ultra-stiff lower profile design. Designed for field and FITA archery. Lightweight for added spped and constructed of Heat Vane material. Weight: 4.4 gr. (1.75 in.), 5.8 gr. (2.25 in.). Height: .375 in. (1.75in.), .325 in. (2.25 in.).
Bohning X3 Vanes feature a shield cut ultra-stiff lower profile design. Designed for field and FITA archery. Lightweight for added spped and constructed of Heat Vane material. Weight: 4.4 gr. (1.75 in.), 5.8 gr. (2.25 in.). Height: .375 in. (1.75in.), .325 in. (2.25 in.).
Bohning X3 Vanes feature a shield cut ultra-stiff lower profile design. Designed for field and FITA archery. Lightweight for added spped and constructed of Heat Vane material. Weight: 4.4 gr. (1.75 in.), 5.8 gr. (2.25 in.). Height: .375 in. (1.75in.), .325 in. (2.25 in.).
Bohning X3 Vanes feature a shield cut ultra-stiff lower profile design. Designed for field and FITA archery. Lightweight for added spped and constructed of Heat Vane material. Weight: 4.4 gr. (1.75 in.), 5.8 gr. (2.25 in.). Height: .375 in. (1.75in.), .325 in. (2.25 in.).
Bohning X3 Vanes feature a shield cut ultra-stiff lower profile design. Designed for field and FITA archery. Lightweight for added spped and constructed of Heat Vane material. Weight: 4.4 gr. (1.75 in.), 5.8 gr. (2.25 in.). Height: .375 in. (1.75in.), .325 in. (2.25 in.).
Bohning X3 Vanes feature a shield cut ultra-stiff lower profile design. Designed for field and FITA archery. Lightweight for added spped and constructed of Heat Vane material. Weight: 4.4 gr. (1.75 in.), 5.8 gr. (2.25 in.). Height: .375 in. (1.75in.), .325 in. (2.25 in.).
Bohning X3 Vanes feature a shield cut ultra-stiff lower profile design. Designed for field and FITA archery. Lightweight for added spped and constructed of Heat Vane material. Weight: 4.4 gr. (1.75 in.), 5.8 gr. (2.25 in.). Height: .375 in. (1.75in.), .325 in. (2.25 in.).
Bohning X3 Vanes feature a shield cut ultra-stiff lower profile design. Designed for field and FITA archery. Lightweight for added spped and constructed of Heat Vane material. Weight: 4.4 gr. (1.75 in.), 5.8 gr. (2.25 in.). Height: .375 in. (1.75in.), .325 in. (2.25 in.).
Bohning X3 Vanes feature a shield cut ultra-stiff lower profile design. Designed for field and FITA archery. Lightweight for added spped and constructed of Heat Vane material. Weight: 4.4 gr. (1.75 in.), 5.8 gr. (2.25 in.). Height: .375 in. (1.75in.), .325 in. (2.25 in.).
Bohning X3 Vanes feature a shield cut ultra-stiff lower profile design. Designed for field and FITA archery. Lightweight for added spped and constructed of Heat Vane material. Weight: 4.4 gr. (1.75 in.), 5.8 gr. (2.25 in.). Height: .375 in. (1.75in.), .325 in. (2.25 in.).
Bohning X3 Vanes feature a shield cut ultra-stiff lower profile design. Designed for field and FITA archery. Lightweight for added spped and constructed of Heat Vane material. Weight: 4.4 gr. (1.75 in.), 5.8 gr. (2.25 in.). Height: .375 in. (1.75in.), .325 in. (2.25 in.).
The Zen vane is a low profile shield cut vane designed for indoor spot shooting. Solves clearance issues when using large diameter shafts. Length: 4”, Height: 0.37”, Weight: 12.5 grains.
The Zen vane is a low profile shield cut vane designed for indoor spot shooting. Solves clearance issues when using large diameter shafts. Length: 4�, Height: 0.37�, Weight: 12.5 grains.
The Zen vane is a low profile shield cut vane designed for indoor spot shooting. Solves clearance issues when using large diameter shafts. Length: 4�, Height: 0.37�, Weight: 12.5 grains.
The Zen vane is a low profile shield cut vane designed for indoor spot shooting. Solves clearance issues when using large diameter shafts. Length: 4�, Height: 0.37�, Weight: 12.5 grains.
The Zen vane is a low profile shield cut vane designed for indoor spot shooting. Solves clearance issues when using large diameter shafts. Length: 4�, Height: 0.37�, Weight: 12.5 grains.
The Zen vane is a low profile shield cut vane designed for indoor spot shooting. Solves clearance issues when using large diameter shafts. Length: 4�, Height: 0.37�, Weight: 12.5 grains.
Hand-warming battery pack gets HOT quickly and last up to 8 hours. Full-grip heating with two temperature settings: Low and High. Indicator lights display remaining power as well as heat settings. Features an LED flashlight and USB port for charging other products. Rechargeable 7200mAh lithium-ion battery with up to 500 recharge cycles lasting 6-8 hours between charges
Capture up-close photos and videos of your hunt with the Optic Mount. This universal optic mount allows any hunter to use their smartphone camera in combination with binoculars, monoculars, and spotting scopes. Lightweight aluminum construction featuring foam pads to secure and protect your phone & optic. Adjustable, universal fit for smartphones up to 3.5" wide. Fits any optic with a diameter of 1.25" - 2.5".
Bone-A-Fide chews are made using the finest quality A grade North American deer and elk antler available. Wont splinter, high mineral content, good for dental health and provides a healthy coat.
Bone-A-Fide chews are made using the finest quality A grade North American deer and elk antler available. Wont splinter, high mineral content, good for dental health and provides a healthy coat.
The Filter Kit works as sunglasses for your scope between the pin and target. The Filter Kit allows you to see your pin better on bright targets and any difficult lighting situation you may encounter. The Filter Kit comes with two filters; one gray and one amber filter and is compatible with all 20/20 Scope accessories.
Smart phone mount works with right or left handed bows. Metal construction with vibration dampening foam to keep phone secure. Fits smart phones from 1 15/16� – 3 3/16� in width. Weight: 4 oz.
High modulus hybrid carbon stabilizers feature a carbon core dampener, precision centerless ground carbon, a custom finish and hard protective coat and a carbon steel stud. Weights sold separately. Bar diameter is .625”. Comes with precision machined contrast cut stabilizer end caps and precision machined contrast cut stabilizer weight end caps.
High modulus hybrid carbon stabilizers feature a carbon core dampener, precision centerless ground carbon, a custom finish and hard protective coat and a carbon steel stud. Weights sold separately. Bar diameter is .625”. Comes with precision machined contrast cut stabilizer end caps and precision machined contrast cut stabilizer weight end caps.
High modulus hybrid carbon stabilizers feature a carbon core dampener, precision centerless ground carbon, a custom finish and hard protective coat and a carbon steel stud. Weights sold separately. Bar diameter is .625”. Comes with precision machined contrast cut stabilizer end caps and precision machined contrast cut stabilizer weight end caps.
High modulus hybrid carbon stabilizers feature a carbon core dampener, precision centerless ground carbon, a custom finish and hard protective coat and a carbon steel stud. Weights sold separately. Bar diameter is .625”. Comes with precision machined contrast cut stabilizer end caps and precision machined contrast cut stabilizer weight end caps.
High modulus hybrid carbon stabilizers feature a carbon core dampener, precision centerless ground carbon, a custom finish and hard protective coat and a carbon steel stud. Weights sold separately. Bar diameter is .750”. Comes with precision machined contrast cut stabilizer end caps and precision machined contrast cut stabilizer weight end caps.
Engineered to provide exceptional stabilization and also quiet the shot. After Shock internal dampener dissipates vibration during and after the shot. Made from extremely rigid carbon. Includes (1) 2 oz. weight and (1) 1 oz. weight.
Fits on compound bows with 1/2" cut-out holes in the riser. They screw together and fit most machined aluminum risers. Comes with large rubber washers to cushion the grip and provide an extra measure of bow dampening.
Fits on compound bows with 1/2" cut-out holes in the riser. They screw together and fit most machined aluminum risers. Comes with large rubber washers to cushion the grip and provide an extra measure of bow dampening.
4-arm dampener helps dampen noise and vibration for your stabilizer. The only stabilizer module designed that has 4 arms with balls at the end for maximum stability and control. 5/16" x 24 thread, weights 2.25 ounces.
Slides snuggly over any manufacture's crossbow bolt retention spring to dampen any twang or vibration noise that is produced when firing your crossbow. No glue or any type of adhesive needed. Won't interfere with bolt fletching or travel.
Limb dampeners designed for split limb bows. X-shaped dampener wedges snugly between the limbs without the use of screws or adhesives. 11/16� size fits Hoyt and newer BowTech with split limbs. 15/16� size fits bows with wider gaps such as Mathews, PSE, and Bear.
Limb dampeners designed for split limb bows. X-shaped dampener wedges snugly between the limbs without the use of screws or adhesives. 11/16” size fits Hoyt and newer BowTech with split limbs. 15/16” size fits bows with wider gaps such as Mathews, PSE, and Bear.
Limb dampeners designed for split limb bows. X-shaped dampener wedges snugly between the limbs without the use of screws or adhesives. 11/16� size fits Hoyt and newer BowTech with split limbs. 15/16� size fits bows with wider gaps such as Mathews, PSE, and Bear.
Revelations Crossbow Kit includes (2) Limb dampeners designed for split limb bows and (2) Stirrup dampeners. X-shaped dampener wedges snugly between the limbs without the use of screws or adhesives. 11/16� size fits Hoyt and newer BowTech with split limbs. 15/16� size fits bows with wider gaps such as Mathews, PSE, and Bear.
Installs in seconds and easily slips over the end of the stabilizer. Improves accuracy and reduces vibration. Fits stabilizers with 3/4� outside diameter.
Can be used with or without string silencers. Eliminates the need for speed buttons. Silences while improving speed. Installs by slipping over the string(bow press required). Weigh 16 grains each. 4 per pack.
Super Slipjax are designed to slip in between the string strands for maximum dampening. Made of super strong polymer and withstand bows shooting up to 320 fps. Weigh 15 grains. 4 pack.
Single-arm bow hanger made from cold-rolled steel with a powder-coat finish mounts ceiling joists and hangs bow 6" from the ceiling with a 12" crossbar to quickly and easily display or hold bows. Mounting hardware included.
Double bow hanger made from cold-rolled steel with a powder-coat finish easily attaches to slat wall. Screws may be added for additional security. Holds bows 6" from the wall and has a 12" crossbar.
Two-arm crossbow hanger made from cold-rolled steel with a powder-coat finish mounts ceiling joists and hangs crossbow 10" from the ceiling with 4" spacing between the bars to quickly and easily display or hold crossbows. Mounting hardware included.
A crossbow hanger made from cold-rolled steel with a powder coat finish that won’t damage bows. Mounts to wall studs and extends outwards 6� from the wall. Includes mounting hardware with snap-on covers for a professional finished look.
This set of four yardage spot are six inches in diameter with a three inch stake that mount flush to the ground at your desired marked 20, 30, 40 and 50 yard locations.
These stakes are made from 1/2" thick steel rod and arrows made of reflective vinyl to guide hikers or guests on paths or trails. The rod measures 20" and the welded circles are 4.5"
Engineered and molded for a controlled and consistent arrow release to ensure accuracy easy on/off activation. No magnets, pullout switches or knife points required. The Breadcrumb Bluetooth Trackable Nock is armed and ready with a simple touch of its water-resistant activation button. The ultra-bright LED is activated upon firing, Breadcrumb’s LED light acts as an illuminated tracer in flight, and becomes a pulsating beacon to aid in retrieval. The PCB processor, the brains behind it all, this tiny microprocessor controls the light, sound and Bluetooth tracking functions. Accelerometer this powerful piece of hardware uses a motion sensor to activate when fired and not while in your quiver. Sound chip and speaker, when an arrow is covered by earth and brush, this unique nock feature calls out to provide you its hidden location. Bluetooth transmitter, with a range up to 100 yards, this tech component reaches out to communicate directly with your smart phone. Replaceable battery providing more than 35 hours of continuous tracking power, the replaceable battery is controlled by the PCB to monitor battery life and conserve energy when needed.
Engineered and molded for a controlled and consistent arrow release to ensure accuracy easy on/off activation. No magnets, pullout switches or knife points required. The Breadcrumb Bluetooth Trackable Nock is armed and ready with a simple touch of its water-resistant activation button. The ultra-bright LED is activated upon firing, Breadcrumb’s LED light acts as an illuminated tracer in flight, and becomes a pulsating beacon to aid in retrieval. The PCB processor, the brains behind it all, this tiny microprocessor controls the light, sound and Bluetooth tracking functions. Accelerometer this powerful piece of hardware uses a motion sensor to activate when fired and not while in your quiver. Sound chip and speaker, when an arrow is covered by earth and brush, this unique nock feature calls out to provide you its hidden location. Bluetooth transmitter, with a range up to 100 yards, this tech component reaches out to communicate directly with your smart phone. Replaceable battery providing more than 35 hours of continuous tracking power, the replaceable battery is controlled by the PCB to monitor battery life and conserve energy when needed.
Engineered and molded for a controlled and consistent arrow release to ensure accuracy easy on/off activation. No magnets, pullout switches or knife points required. The Breadcrumb Bluetooth Trackable Nock is armed and ready with a simple touch of its water-resistant activation button. The ultra-bright LED is activated upon firing, Breadcrumb’s LED light acts as an illuminated tracer in flight, and becomes a pulsating beacon to aid in retrieval. The PCB processor, the brains behind it all, this tiny microprocessor controls the light, sound and Bluetooth tracking functions. Accelerometer this powerful piece of hardware uses a motion sensor to activate when fired and not while in your quiver. Sound chip and speaker, when an arrow is covered by earth and brush, this unique nock feature calls out to provide you its hidden location. Bluetooth transmitter, with a range up to 100 yards, this tech component reaches out to communicate directly with your smart phone. Replaceable battery providing more than 35 hours of continuous tracking power, the replaceable battery is controlled by the PCB to monitor battery life and conserve energy when needed.
Breakthrough Clean Technologies premium carbon fiber rods offer the safest way to clean the inside of your barrel. Featuring an ergonomic handle and two premium ball bearing sets, the rod can smoothly migrate through the bore of your barrel without binding up under pressure. Its carbon fiber rod offers you the security of knowing you’ll never have to worry about scratching or damaging the rifling inside the barrel of your firearm. Its lightweight yet durable carbon fiber construction is long lasting and won’t permanently bend or break under pressure.
The new breakthrough clean battle ropes are made to cover all of your firearm cleaning needs. Designed to better clean the bore of your firearm, the battle rope's integrated bronze brush and detachable hard bristle nylon brush provide twice the cleaning action.
The new breakthrough clean battle ropes are made to cover all of your firearm cleaning needs. Designed to better clean the bore of your firearm, the battle rope's integrated bronze brush and detachable hard bristle nylon brush provide twice the cleaning action.
The new breakthrough clean battle ropes are made to cover all of your firearm cleaning needs. Designed to better clean the bore of your firearm, the battle rope's integrated bronze brush and detachable hard bristle nylon brush provide twice the cleaning action.
The new breakthrough clean battle ropes are made to cover all of your firearm cleaning needs. Designed to better clean the bore of your firearm, the battle rope's integrated bronze brush and detachable hard bristle nylon brush provide twice the cleaning action.
The new breakthrough clean battle ropes are made to cover all of your firearm cleaning needs. Designed to better clean the bore of your firearm, the battle rope's integrated bronze brush and detachable hard bristle nylon brush provide twice the cleaning action.
The new breakthrough clean battle ropes are made to cover all of your firearm cleaning needs. Designed to better clean the bore of your firearm, the battle rope's integrated bronze brush and detachable hard bristle nylon brush provide twice the cleaning action.
This compact Vision Series Cleaning Kit line offers you everything you need to ensure a thorough clean. Its plastic tray keeps all the various pieces of the kit organized neatly inside a durable case that acts like a mini toolbox. These cleaning kits come with cleaning rod sections, various hard bristle nylon brushes, jags, patch holders, and cotton patches. Also included is a durable and detachable aluminum handle with knurling for an easy grip and mini bottles of Breakthrough Military-Grade Solvent and Battle Born High-Purity Oil.
Compact and housed in a rugged non-slip rubber armoring, the LR800 uses a three-barrel design to accurately measure distances of up to 800 yards and display the results using a clear LCD readout. The device offers a combination of multi-coated optics, 21mm objective lens and 4x magnification to generate bright images that allow for quick target acquisition. Powered by a 9-volt battery, the laser rangefinder also has 12mm of eye relief and comes with a carry case, lanyard and lens cloth.
