Since 1998, eders.com has offered the largest selection archery and hunting equipment at the best prices. For even more savings on Archery and BowHunting Supplies, Join our Professional Bowhunter Buyer's Club, membership is NOW FREE for all.
Get Free Standard Shipping on all orders over $200.00. Just type: freeshipping in the coupon field during checkout.
Model 219R is a 1.0 ounce Peanut knife that is designed with a 2” Taper Ground 440 Stainless Steel blade that is rust resistant and easy to sharpen. The handle is made from Rosewood material with Nickel Silver Bolsters and a stainless-steel liner. Model 219R is a traditional slip-joint that features a nail nick to open the blade. The Blade Material: 440 Stainless Steel; Handle Material: Rosewood; Blade Length: 2"; Closed Length: 2-7/8"; Open Length: 4-7/8".
This knife is a 3.3 ounce Large Trapper that is designed with Hollow Ground 440 Stainless Steel blades that are rust resistant and easy to sharpen. The handle is made from Rosewood material with Nickel Silver Bolsters and stainless-steel liners. Model 254R is a traditional slip-joint Large Trapper that features nail nicks to open the blades. The Blade Material is 440 Stainless Steel; Handle Material is Rosewood; Blade Length is 3-1/4"; Closed Length is 4-1/8" and Open Length is 7-3/8".
The Blade Material is 440 Stainless Steel; Handle Material is Stainless Steel w/Black Soft Touch Coating; Blade Length is 4-7/8" and Overall Length is 9-3/4".
The Blade Material is 440 Stainless Steel; Handle Material is Stainless Steel w/Black Soft Touch Coating; Blade Length is 3-1/4"; Closed Length is 4-1/4" and Open Length is 7-3/8".
The Blade Material is 440 Stainless Steel; Handle Material is Stainless Steel w/Black Soft Touch Coating; Blade Length is 3-5/8"; Closed Length is 5" and Open Length is 8-5/8".
Nickel Silver Bolsters, Hollow Ground Blade & Positive Lock The Blade Material is 440 Stainless Steel; Handle Material isStag Delrin; Blade Length is 2-1/4"; Closed Length is 3" and Open Length is 5-3/8".
Model 224R is a 1.5 ounce Executive Lockback that is designed with a 2-1/8” Hollow Ground 440 Stainless Steel blade that is rust resistant and easy to sharpen. The handle is made from Rosewood material with a Nickel Silver Bolster and a stainless-steel liner. Model 224R features a stainless-steel positive lock to ensure that the blade remains firmly in place and a nail nick to open the blade. The Blade Material: 440 Stainless Steel; Handle Material: Rosewood; Blade Length: 2-1/8"; Closed Length: 3"; Open Length: 5-1/4".
Model 226R is a 1.8 ounce Clip Point Lockback that is designed with a 2-1/4” Hollow Ground 440 Stainless Steel blade that is rust resistant and easy to sharpen. The handle is made from Rosewood material with Nickel Silver Bolsters and a stainless-steel liner. Model 226R features a stainless-steel positive lock to ensure that the blade remains firmly in place and a nail nick to open the blade. The Blade Material: 440 Stainless Steel; Handle Material: Rosewood; Blade Length: 2-1/4"; Closed Length: 3"; Open Length: 5-3/8".
The Pattern 104 is a 3-1/2” Framelock that is part of the Bear Edgeline and weighs 2.9 ounces. The 2-1/2” hollow ground modified drop point blade is made with 440 High Carbon Stainless Steel with a black powder coating to prevent rust and is easy to sharpen. Thumb studs are present on the blade for easy opening and the Bear Edge logo is engraved onto the blade. The stainless-steel framelock ensures that the blade will remain firmly in place and jimping is present on the top of the blade for a more secure grip. The lightweight stainless-steel frame features a Bear Edge engraved pocket clip for tip-down carry for a right-handed carry and quick access. A lanyard spacer is present on the back of the handle for secure fastening and storage. The Blade Material is Stainless Steel; Handle Material isBlack Stainless Steel Handles; Blade Length is 2-1/2"; Closed Length is 3-1/2" and Open Length is 6".
The Pattern 108 is a 9-1/4” Black Compact Bowie knife that is part of the Bear Edge® line and weighs 5.8 ounces. The 5” hollow ground blade is made with 440 High Carbon Stainless Steel with a black powder coating to help prevent rust and is easy to sharpen. This fixed compact Bowie is designed with a stainless-steel guard and the Bear Edge logo is engraved on the blade. The handle is made with a rugged Black G10 style for a secure grip and comes with a ballistic sheath for belt carry. A lanyard hole is also present on the back of the handle for secure fastening and storage. The Blade Material is 440 Stainless Steel; Handle Material isBlack G10; Blade Length is 5"; Overall Length is 9-5/8" and Ballistic Sheath.
Features spring assisted opening, black G10 handle, reversible pocket clip and a 440 stainless steel blade. Blade length: 3 3/8”. Overall Length: 7 3/8”.
The Bear Edge Pattern 102 is an everyday carry knife that features Smooth Action Ball Bearing Washers for easy opening. Pattern 102 features a Blade Trigger that allows for fast deployment while being out in the woods, in the workshop, or around the house. The 3-3/8" blade is made of 440 Stainless Steel along with Stainless Steel Hidden Liners in the handles for more support and durability. Pattern 102 features a G10 handle with a reversible pocket clip for either the right-handed or left-handed carrier. Pattern 102 is a Tip-Up Carry and is lightweight, weighing only 3.1 ounces, allowing anyone to carry this knife in their pocket. The Blade Material is 440 Stainless Steel; Handle Material isGreen G10; Blade Length is 3-3/8"; Closed Length is 4-1/2" and Open Length is 7-7/8".
This knife is a 2.5 ounce Large Stockman that is designed with a 2-7/8” Hollow Ground 440 Stainless Steel clip point blade and taper ground sheepsfoot and spey blades. The handle is made from Rosewood material with Nickel Silver Bolsters and stainless-steel liners. Model 247R is a traditional slip-joint Stockman that features nail nicks to open the blades. The Blade Material is 440 Stainless Steel; Handle Material is Rosewood; Blade Length is 2-7/8"; Closed Length is 3-7/8" and Open Length is 6-3/4".
The Blade Material is Stainless Steel; Handle Material is Stainless Steel Handles; Blade Length is 1-3/4"; Closed Length is 2-1/4" and Open Length is 4-7/8".
Model 218R is a 1.5 ounce Midsize Stockman that is designed with Taper Ground 440 Stainless Steel blades for rust resistance and easy sharpening. The handle is from popular Rosewood material with Nickel Silver Bolsters and stainless-steel liners. Model 218R features the traditional slip-joint with double ends and nail nicks to open the blades. The Blade Material: 440 Stainless Steel; Handle Material: Rosewood; Blade Length: 2-3/8"; Closed Length: 3-1/4"; Open Length: 5-5/8".
The Pattern 103 4-1/2” Black & Red Assisted Sideliner that is part of the Bear Edge line and weighs 4.3 ounces. The 3-1/2” hollow ground blade is made with 440 High Carbon Stainless Steel with a black powder coating to prevent rust and is easy to sharpen. Pattern 103 is designed with thumb studs on the blade and smooth action ball bearings for easy opening. The stainless-steel sideliner lock ensures that the blade remains firmly in place and jimping is present on the lock for a more secure grip. The black & red aluminum handle features a reversible pocket/boot clip for tip-up carry that allows either right- or left-hand carry or quick access. A lanyard spacer is present on the back of the handle for secure fastening and storage. Pattern 103 also has the Bear Edge logo engraved onto the blade and pocket/boot clip. The Blade Material is 440 Stainless Steel; Handle Material isBlack Aluminum Handles; Blade Length is 3-1/2"; Closed Length is 4-1/2" and Open Length is 7-3/4".
The Pattern 109 is a 3-1/2” Aluminum Sideliner that is part of the Bear Edge line and weighs 2.4 ounces. The 2-5/8” hollow ground modified drop point blade is made with 440 High Carbon Stainless Steel with a bead blast finish to help prevent rust and is easy to sharpen. Pattern 109 is designed especially for easy opening as it features thumb studs and a thumb flipper to smoothly open the blade as well as smooth action ball bearing washers to assist in locking the blade in place with one quick flick of the thumb. Pattern 109 also features a thumb flipper that allows the carrier to easily open the blade. The stainless-steel sideliner lock ensures that the blade remains firmly in place and jimping is present on the sideliner lock and top of the blade for a more secure grip. The lightweight aluminum frame features a reversible pocket/boot clip for tip-up carry for either left- or right-hand carry and quick access. A lanyard spacer is present on the back of the handle for secure fastening and storage. Pattern 109 also has the Bear Edge logo engraved onto the blade and pocket/boot clip. The Blade Material is 440 Stainless Steel; Handle Material isAluminum Handles; Blade Length is 2-5/8"; Closed Length is 3-1/2" and Open Length is 6".
The Pattern 105 is a 4-1/4” Aluminum Sideliner that is part of the Bear Edge line and weighs 3.7 ounces. The 3-1/4” hollow ground modified drop point blade is made with 440 High Carbon Stainless Steel with a bead blast finish to prevent rust and is easy to sharpen. Pattern 105 is designed especially for easy opening as it features thumb studs and a thumb flipper to smoothly open the blade as well as smooth action ball bearing washers to assist in locking the blade in place with one quick flick of the thumb. The stainless-steel sideliner lock ensures that the blade remains firmly in place and jimping is present on the sideliner lock and top of the blade for a more secure grip. The lightweight aluminum frame features a reversible pocket clip for tip-up carry for either left- or right-hand carry and quick access. A lanyard spacer is present on the back of the handle for secure fastening and storage. Pattern 105 also has the Bear Edge logo engraved on the blade and pocket/boot clip. The Blade Material is 440 Stainless Steel; Handle Material isBead Finish Aluminum Handles; Blade Length is 3-1/4"; Closed Length is 4-1/4" and Open Length is 7-3/8".
Model 233R is a 1.2 ounce Small Stockman that is designed with a 2-1/8” Hollow Ground 440 Stainless Steel clip point blade and taper ground sheepsfoot and spey blades. The handle is made from Rosewood material with Nickel Silver Bolsters and stainless-steel liners. Model 233R is a traditional slip-joint pocket knife that features nail nicks to open the blades. The Blade Material: 440 Stainless Steel; Handle Material: Rosewood; Blade Length: 2-1/8"; Closed Length: 3"; Open Length: 4-7/8".
These Kvines are 100% stainless steel. The blades are made from High Carbon Stainless Steel and Hollow Ground. The Blade Material is 440 Stainless Steel; Handle Material is Zytel; Blade Length is 2-3/4"; Closed Length is 3-3/4".
The Pattern 106 is a 4-1/2” Zytel Assisted Sideliner that is part of our Bear Edge line and weighs 3.3 ounces. The 3-1/2” hollow ground modified drop point blade is made with 440 High Carbon Stainless Steel with a black powder coating to prevent rust and is easy to sharpen. Thumb studs are present on the blade for easy opening and the Bear Edge logo is engraved onto the blade. The stainless-steel sideliner lock ensures that the blade remains firmly in place and jimping is present on the handle, top of the blade, and sideliner lock for a more secure grip. The black Zytel handle features a Bear Edge engraved reversible pocket/boot clip for tip-up carry for either left- or right-hand carry and quick access. The Blade Material is 440 Stainless Steel; Handle Material isBlack Aluminum Handles; Blade Length is 3-1/2"; Closed Length is 4-1/4" and Open Length is 7-7/8".
The blades are made from Japanese 10A stainless steel famed for its edge holding ability, strength and toughness and the handles are laser cut from real G-10. Tri-Ad Lock for extra protection.
Exchanging a blade is easy. The handle has a lock bar release, similar to the release on a folding knife. When the lock bar is pressed the blade slides easily out. Keep the lock bar pressed and slide a new blade in and release the lock bar and the blade will “click� into place. The Click-N-Cut includes a belt sheath that will hold the knife with one of the blades installed and it has integral pockets for the two remaining extra blades. Extra replacement blades are available separately.
Strongly resembling Wes’s custom knife, the blade features a wide saber grind and a strong, sharp point with plenty of belly for cutting and slashing. It’s made from Japanese 4034 Stainless and is hollow ground to a thin, razor edge that will cut at the slightest touch. And, because Wes’s “flipper� is integrated into the tang, it can be opened lightning fast!
Its wide, clip-point blade is 3.5� in length and is comprised of 8Cr13MoV steel, tempered to 57-58 Rockwell hardness. With a blade small enough for intricate cutting tasks, yet big enough to skin anything from a mouse to a moose. This knife has a camouflage glass-filled nylon (GFN) handle is thin and ergonomically pleasing and features a replaceable plastic pocket clip. Plastic pocket clips help to limit the snags and scratches to upholstery and other surfaces that steel clips have been known to cause. The rocker lock features a secondary safety mechanism, that when engaged is enormously resistant to shock and impact.
The Finn Hawk’s handle is two time injection molded. The first layer of high-impact polypropylene is strong, durable and highly weather resistant, while the outer layer (made of TPR rubber) has a whorled spiral pattern providing a food safe, comfortable and secure grip in even the worst conditions. The Finn Hawk is supplied complete with a slim line secure-ex polymer sheath with integrated belt loop.
Equipped with Tri-Ad lock for superior safety and security, the Finn Wolf is a folder that you can rely on in even the most uncompromising conditions. Its satin polished Japanese AUS 8A blade is ready to put in long hours and hard work, and with its zero ground edge it's a breeze to re-sharpen in the field. Blade length: 3.5�, Handle Length: 4.375�, Overall Length: 7.875�.
The contrasting grinds of the Khan’s line-grain satin polished American Tanto blade contrast beautifully with its rich blue G-10 handle scales, bead blasted pocket clip, and Silver Eye, adding good looks and style to this practical utility knife and tool. Blade length: 3”, Handle Length: 4”, Overall Length: 7”, Weight: 2.4 oz.
The Kobun features Cold Steels iconic reinforced “American Tanto� point, making it highly resistant to bending or breaking because it is reinforced by the full thickness of the blade’s spine (which runs almost to the very tip of the blade). Despite its thin profile, the Kobun’s deeply checkered Kray-Ex handle is designed to offer maximum grip and is contoured to resist turning or shifting in the hand.
Features a non-slip, hard-wearing handle and 1055 carbon steel blade. The thick solid steel tang runs all the way through the D-ring guard to give a safe and secure grip. The entire handle is encased in a tough, durable and weatherproof injection molded polypropylene. Includes a black Cor-Ex belt sheath.
Offering incomparable levels of safety, they’re equipped with a sturdy leaf-spring lock and a (patent-pending) secondary safety mechanism that, when it’s engaged is extremely resistant to shock and impact.
The Mini Tac Bowie provides the versatility of a sharp, sturdy clip point, making it ideal for use in the field or for everyday carry. Includes a Secure-Ex sheath and steel bead lanyard.
In appearance, the Pendleton Lite Hunter strongly resembles Lloyd’s classic functional designs, with a practical drop point blade, modest guard, hollowed bolster area, and a flared butt to aid retention in slippery and inclement conditions. The only major changes were the adoption of subzero cryo quenched German 4116 Stainless steel and the use of high-impact polypropylene for the handle.
The Bushman features a simple design that is economically friendly without compromising on strength and versatility. The blade is long and wide with a short, sharp, clip point that can be used for a variety of purposes. The handle is made with mono block construction with no liners, scales or back spacers, helping reduce cost. A single sheet of stainless steel is folded in half to form a housing for the closed bade, as well as increasing the strength and rigidity required for the Ram Safe lock.
Designed from the ground up for usefulness, durability and effectiveness, it offers a long, sharp, clip point blade that’s flat ground out of high carbon steel. Honed razor sharp it folds up into an equally tough handle. Made with faux sawed bone handle scales, and reinforced with tough stainless steel bolsters. It comes with a stiff back spring (like a slip joint pocket knife) and a stainless steel liner lock, so your fingers will have extra protection. It’s paired with a thick brown leather belt sheath.
Features a sharp and strong bead-blasted American CTS XHP Alloy blade, and 43 percent glass filled Zy-Ex handle. Equipped with patent pending, stainless steel leaf spring locks. For ease of carry, the Ti-Lite comes equipped with a small, but unobtrusive pocket clip, and can be opened rapidly by using the thumb studs. Blade length: 4�, Handle Length: 4.75�, Overall Length: 8.75�.
Features a sharp and strong AUS 8A blade, and ZY-EX handle. Equipped with patent pending, stainless steel leaf spring locks. For ease of carry, the Ti-Lite comes equipped with a small, but unobtrusive pocket clip, and can be opened rapidly by using the thumb studs. Blade length: 6�, Handle Length: 7�, Overall Length: 13�.
The Gamekeeper Boning Knife features a strong and sharp hardened steel blade and an ergonomic grip handle with lanyard hole built in. Includes a rugged endura sheath.
The Gamekeeper Drop Point Folding knife features an easy open thumb stud and an ergonomic grip handle. The drop point design provides surgical cutting and skinning. The gut hook makes for fast and easy hide cutting. Includes a rugged endura sheath.
The Gamekeeper Hunting Knife is a skinning knife with gut hook. Features a super strong one piece blade design. The curved wide blade is effective for skinning. Includes a rugged endura sheath.
The Switch-Back Knife features surgical precision cutting blades, fast blade exchange and a folding design. Includes 3 replacement blades and a rugged endura sheath.
The Switch-Back Knife features surgical precision cutting blades, fast blade exchange and a folding design. Includes 3 replacement blades and a rugged endura sheath.
The GameKeeper Zip Skinning Knife uses standard utility blades for easy blade replacement. The two layer handle offers maximum comfort and grip. Extra blades can be stored inside the handle. Sheath included.
The evolution of a proven design, this carry pocket knife stand up to the daily grind with all steel construction. Dual thumbstuds all for amidextrous opening and durable fram lock can be operated with one hand.
The Dime is a mini multi-tool with an impressive list of features, ensuring you are ready for anything. The Dime is a butterfly open tool that fits on your keychain with 12 useful tools.
FlatIron is built for utility with a cleaver blade in a folding application. The pocket folder freatures a robust 3.6" blade, textured aluminum handle and sturdy frame lock design.
The Key Note is a do-it-all knife that packs a surprising amount of utility into a compact frame. The dual use blade is deployed with a starter tab and secured open with nail nick.
Dual knife kit for the modern hunter. Includes the Myth Fixed Blade Pro with gut hook and the Myth Compact Fixed Blade knife packaged together in a slimb puncture proof sheath. Sheath also features a built in carbide sharpener for use in the field. Knives are built with a textured rubber handle for secure grip. Blade Length: 3.75" (Gut Hook Knife), 3.25" (Small Knife). Overall Length: 8.5" (Gut Hook Knife), 7.25" (Small Knife).
The Truss is an all-inclusive multi-tool, with 17 tools buitl to the exact needs of the professional user. This full size multi-tool aims to remove excess heft while keeping all of the functionality.
One of Havalon's thickest blades. Perfect for an all purpose big game hunting blade. Made from micro-honed stainless steel. Fits all Baracuta style knives. Length: 4 3/8".
Stainless steel scalpel blade is surgically sharp and features a precision edge that lasts. Perfect for skining, caping, and other fine detail work. Fits the Piranta Tracer 22. Blade Length: 2 1/8".
Put an end to holes in your hide with the 22XT blade. The blunt tip helps prevent accidental punctures in your work, and at 50 percent thicker than the normal 22 blade, the 22XT holds a longer edge and is able to resist heavy breakage. Fits all Piranta style knives except the Tracer 22. Individually foil wrapped and measure 2 1/8�.
20 percent thicker and 30 percent stronger than the 60XT blade. Ideal choice for the hunter looking for strength and precision. Fits all Piranta-style knives. Blade Length: 2 3/4".
Incredibly sharp blade that has an edge that's able to endure countless skinning and field dressings. Fits all Piranta-style knives. Blade Length: 2 3/4".
A top choice for hunters and anglers looking for a larger knife. Includes 115XT hunter's blades for skinning and deboning big game, but also accepts 127XT fillet blades and 115SW serrated bone saw blades (both solde separately) for ultimate versatility. Made with military grade polymer handle with black rubber inserts and removable pocket clip. Blade Length: 4 3/8", Overall Length: 10 3/8". Includes (5) replacement blades and nylon holster.
A top choice for hunters and anglers looking for a larger knife. Includes 127XT blades for filleting fish and deboning big game, but also accepts 115XT hunter's blades and 115SW serrated bone saw blades (both solde separately) for ultimate versatility. Made with military grade polymer handle with black rubber inserts and removable pocket clip. Blade Length: 5", Overall Length: 11". Includes (5) replacement blades and nylon holster.
Multi tool features a compact lightweight size, 2Cr13 cast stainless tool steel pliers with grippers, wire cutter, and two wire stripper notches, 420J2 stainless steel skeletonized handle frame and scales with scratch resistant black Titanium Nitride coating, folding gut hook, carabineer spring clip, pocket clip, liner locking blade fitment and a locking bit driver that fits standard hex bits. Bit storage in handle holds included combo bit and storage for two additional standard hex bits. Closed length: 4-1/2�, Open length: 7-3/8�. Includes a Phillips 2 and 1/4� flathead combo screwdriver bit.
Folding knife features an ABS polymer handle with non-slip TPR rubber grip, ambidextrous thumb stud and a removable holster clip. Fits all styles of Piranta blades. Includes a nylon holster and 6 additional 60A blades. Overall length: 7 7/8�.
Folding knife features an ABS polymer handle with non-slip TPR rubber grip, ambidextrous thumb stud and a removable holster clip. Fits all styles of Piranta blades. Includes a nylon holster and 6 additional 60A blades. Overall length: 7 7/8�.
A double blade folding knife with a 60A blade on one side and a bone saw on the other side. Comes with a pouch that has slots for all the Baracuta and Piranta blades.
Features the stronger 60A blades and larger handle for improved grip. Great for skinning, caping, quartering or field dressing game. Includes removable pocket clip, nylon holster, and (12) 60A blades.
For fast and easier skinning and field dressing of just about any wild game. Features a rugged ABS plastic handle and liner lock construction and removable pocket clip. Accepts 60A and 60XT blades. Blade Length: 2 3/4". Includes (12) 60A blades and nylon holster.
For fast and easier skinning and field dressing of just about any wild game. Features a rugged ABS plastic handle and liner lock construction and removable pocket clip. Accepts 60A and 60XT blades. Blade Length: 2 3/4". Includes (12) 60A blades and nylon holster.
The Havalon Redi EDC is a foldable pocket knife with a 2.5-inch stainless steel blade. Includes a black polymer handle for an overall length of 7.8-inches when open.
The Havalon Redi EDC is a foldable pocket knife with a 2.5-inch stainless steel blade. Includes a green polymer handle for an overall length of 7.8-inches when open.
The Stag features a unique grip made from rugged military grade Zytel polymer that resembles the curves and contours of the terrain you hunt. Wet, dry or dirty this new handle design will always give you a solid grip. Features an ambidextrous thumb stud, open back for easy cleaning, liner-lock construction and a removable holster clip. Includes a nylon holster and 6 additional stainless steel 2 ¾� 60A blades. Fits all styles of Piranta blades.
The Stag features a unique grip made from rugged military grade Zytel polymer that resembles the curves and contours of the terrain you hunt. Wet, dry or dirty this new handle design will always give you a solid grip. Features an ambidextrous thumb stud, open back for easy cleaning, liner-lock construction and a removable holster clip. Includes a nylon holster and 6 additional stainless steel 2 ¾� 60A blades. Fits all styles of Piranta blades.
All Talon blades are made of AUS-8 Stainless Steel and are honed to the same surgical sharpness found on all other Havalon Blades. Fits on all Talon handles.
All Talon blades are made of AUS-8 Stainless Steel and are honed to the same surgical sharpness found on all other Havalon Blades. Fits on all Talon handles.
All Talon blades are made of AUS-8 Stainless Steel and are honed to the same surgical sharpness found on all other Havalon Blades. Fits on all Talon handles.
All Talon blades are made of AUS-8 Stainless Steel and are honed to the same surgical sharpness found on all other Havalon Blades. Fits on all Talon handles.
HME-KN-SKFB features:Skeletonized Stainless-steel blade/handle, One solid piece construction for extreme durability, Black oxidized blade, 3ft of 550 black paracord, Includes Kydex Sheath and holster clip
HME-KN-SKFBGH features:Skeletonized Stainless-steel handle, light weight, One solid piece construction for extreme durability, Black oxidized blade with gut hook, 3ft of 550 black paracord, Includes Kydex Sheath and holster clip
The Deka Manual Folder features a 3.25� modified Wharncliffe blade made of heat treated stainless steel. Features ambidextrous thumb studs for convenient opening and closing. A black G10 handle with crosshatch texturing provides durable grip with one-handed operation. Includes a stainless steel pocket clip that can be configured for right or left-hand users.
The Deka Manual Folder features a 3.25� modified Wharncliffe blade made of heat treated stainless steel. Features ambidextrous thumb studs for convenient opening and closing. A G-Mascus Blue Lava G10 handle with crosshatch texturing provides durable grip with one-handed operation. Includes a stainless steel pocket clip that can be configured for right or left-hand users.
The SIG EX-F03 Tactical Fixed Blade features a hawkbill blade made of heat-treated 154CM stainless steel. G10 scales with checkered texture provide a secure grip. Includes a quick-deploying nylon belt sheath with rotating clip.
Designed in collaboration with Sig Sauer, the K320 features a design based on Sig Sauer’s P320 pistol. The polymer grip and texturing are based on the P320, creating a lightweight grip with plenty of texture. Features a pocket clip that can be positioned in all four corners and an ABLE-style locking system. Includes a generous thumb ramp, finger choil, and a lanyard hole.
Designed in collaboration with Sig Sauer, the K320 features a design based on Sig Sauer’s P320 pistol. The polymer grip and texturing are based on the P320, creating a lightweight grip with plenty of texture. Features a pocket clip that can be positioned in all four corners and an ABLE-style locking system. Includes a generous thumb ramp, finger choil, and a lanyard hole.
Designed in collaboration with Sig Sauer, the K320 features a design based on Sig Sauer’s P320 pistol. The polymer grip and texturing are based on the P320, creating a lightweight grip with plenty of texture. Features a pocket clip that can be positioned in all four corners and an ABLE-style locking system. Includes a generous thumb ramp, finger choil, and a lanyard hole.
Designed in collaboration with Sig Sauer, the K320 features a design based on Sig Sauer’s P320 pistol. The polymer grip and texturing are based on the P320, creating a lightweight grip with plenty of texture. Features a pocket clip that can be positioned in all four corners and an ABLE-style locking system. Includes a generous thumb ramp, finger choil, and a lanyard hole.
Combo includes gut hook knife with blaze orange handle, rubber grip, and replaceable blade and the Butt Out 2 field dressing tool. Butt Out allows the hunter to quickly and easily disconnect the anal alimentary canal from deer and other big game. Includes nylon sheath.
18 piece knife display. Knives are constructed of 420 stainless steel pins, blades and bolsters and impact resistant ABS handles with rubber grip inserts. Blade length is 2 ¼�, handle length 3 ¼�. Features a pocket clip.
This folding utility knife features perfect ergonomics and extensive jimping on the stainless steel blade holder. Simply and safely replace blades with a flick of your finger using the safety guarded thumb button. Accepts standard utility razor blades. Constructed of 420J2 stainless steel with a sure grip textured glass/nylon polymer handle.
Eight piece butcher kit that includes a caping knife with a 3" long blade, gut hook skinner with a 4.25" long blade, boning with a 6" long blade, wood and bone saw with a 7.25" blade, rib cage spreader, tungsten carbide sharpener, game cleaning gloves and a roll pack belt scabbard.
This lightweight stainless steel eating utensil gets the job done while taking up minimal space. The folding design swings open and locks securely, revealing a full size fork and spoon with a serrated food separator, integrated bottle opener, can opener and flathead screwdriver.
The DuckDuo is a lightweight, two knife combination including a gut-hook skinner and a caping knife with rubberized duck head handle. A Kryptek Highlander belt sheath is included.
The GamePro is a complete 11-piece game processing kit Including caping knife, gut-hook skinning knife, boning/fillet knife, butcher knife, game shears, wood/bone saw, ribcage spreader, two-stage sharpener, game cleaning gloves and cutting mat all housed in a 14"x10.2"x2.2" hard-sided case.
This two knife, fixed-blade set combines a classic drop-point skinner with a full-size gutting knife to open game like a zipper. Comes complete with a nylon belt sheath.
LeHawk is a versatile, fixed-blade knife with a Blackstone coated, non-reflective, 8Cr14 stainless blade. Other features include a rubberized TPR handle and a polymer sheath with 360 degree rotating clip.
Razor blade knife with a durable one piece Grivory polymer handle and distinct non-slip Trimond texture pattern. Comes complete with ambidextrous thumb opener, replaceable pocket clip and three replacement blades.