Since 1998, eders.com has offered the largest selection archery and hunting equipment at the best prices. For even more savings on Archery and BowHunting Supplies, Join our Professional Bowhunter Buyer's Club. Membership is FREE for all members of the US Military and for First Responders.
The Afflictor Fixed EXT broadhead features EXT series tip and a low profile cut on contact design engineered for the toughest animals. Constructed with a 7075-T6 ferrule, .059 1 ¼” cut stainless steel main blade and .059 5/8” cut stainless steel bleeder blade.
The Afflictor Fixed EXT broadhead features EXT series tip and a low profile cut on contact design engineered for the toughest animals. Constructed with a 7075-T6 ferrule, .059 1 ¼” cut stainless steel main blade and .059 5/8” cut stainless steel bleeder blade.
The Afflictor K2 Fixed broadhead features K2 series tip and a low profile cut on contact design engineered for the toughest animals. Constructed with a 7075-T6 ferrule, .059 1 ¼” cut stainless steel main blade and .059 5/8” cut stainless steel bleeder blade.
The Afflictor K2 Fixed broadhead features K2 series tip and a low profile cut on contact design engineered for the toughest animals. Constructed with a 7075-T6 ferrule, .059 1 ¼” cut stainless steel main blade and .059 5/8” cut stainless steel bleeder blade.
Fixed blade broadhead with blade over shaft design. Features .010” thick serrated stainless steel blades. Designed to work with arrows up to .315” outside diameter and bows over 60 lbs. of draw weight. Weight: 10 gr.
Fixed blade broadhead with blade over shaft design. Features .010” thick serrated stainless steel blades. Designed to work with arrows up to .315” outside diameter and bows over 45 lbs. of draw weight. Weight: 10 gr.
Fixed blade broadhead that is manufactured using the MIM injection molded metal technology. They are precision sharpened and individually spin tested. They have 3 blades, weigh 100 grains and have a 1 in. cutting diameter.
The ferrule of the Bloodrush broadhead is machined with aircraft grade aluminum using a 26 degree twist. This twist dynamic is effective at multiplying soft tissue displacement when either moving forward, or rearward, through the internal cavity of big game animals. Secondly, by taking advantage of integral ferrule “blood ports” the process of blood loss is actually multiplied and enhanced as the blood fluid is displaced across a larger surface area. This combination of both ferrule twist and port suction creates a scientific phenomenon similar to a whirlpool or fluid vortex. 1 1/4" cutting diameter.
Fixed three blade broadhead with 1 3/16” cutting diameter and .031” thick stainless steel blades held in to ferrule with locking collar. Razor sharp chisel tip for greater penetration.
Made with a razor sharp chisel tip and partially serrated .030” blades. Offers field point accuracy. Includes replaceable rubber o-rings. Cutting Diameter: 1 3/4”
Made with a razor sharp chisel tip and partially serrated .030” blades. Offers field point accuracy. Includes replaceable rubber o-rings. Cutting Diameter: 1 3/4”
Molten metal injected one piece head. Low profile head that is individually spin tested and triple sharpened. It has a 1” cutting diameter and weighs 100gr.
The world’s first bladeless broadhead. Revolutionary titanium .053” razor wire blade construction provides awesome penetration due to flexibility. Same impact point as field tips with four exposed cutting surfaces. Solid one-piece body is virtually indestructible.
Unique circular blade design for maximum penetration. Circular blade rotates upon contact with bone, leading to less resistance and a higher percentage of pass throughs. Features a cut on contact tip and 7075 aluminum ferrule.
Unique circular blade design for maximum penetration. Circular blade rotates upon contact with bone, leading to less resistance and a higher percentage of pass throughs. Features a cut on contact tip and 7075 aluminum ferrule.
The Reckoning Deep Cut broadhead is constructed of 100 percent stainless steel. Features a Scooptail design, a universal ferrule that accepts any Reckoning blade style, reversible blade design for double head life, 0.03” thick blades and a cut on contact tip. Weight: 100 grains. Cutting diameter 1 1/8”.
The Reckoning Wide Cut broadhead is constructed of 100 percent stainless steel. Features a Scooptail design, a universal ferrule that accepts any Reckoning blade style, 0.03” thick blades and a cut on contact tip. Weight: 100 grains. Cutting diameter 1 1/2”.
Built with a universal ferrule that can be used with any of the Wraith series blades. Scooptail design increases efficiency in accuracy and terminal performance. Cutting diameter: 1 1/8”.
Built with a universal ferrule that can be used with any of the Wraith series blades. Scooptail design increases efficiency in accuracy and terminal performance. Cutting diameter: 1 1/8”.
Built with a universal ferrule that can be used with any of the Wraith series blades. Scooptail design increases efficiency in accuracy and terminal performance. Features blades designed for taking body shots on turkeys. Cutting diameter: 1 1/8”.
Built with a universal ferrule that can be used with any of the Wraith series blades. Scooptail design increases efficiency in accuracy and terminal performance. Features large blades designed for taking head shots on turkeys. Cutting diameter: 2 3/8”.
Built with a universal ferrule that can be used with any of the Wraith series blades. Scooptail design increases efficiency in accuracy and terminal performance. Cutting diameter: 1 1/4”.
The Piledrive broadhead features a pro grade design with piercing trajectory and a 3 point blade locking system. Weight: 150 grain, Cutting Diameter: 1.5”, Blade Thickness: 0.0595”
Fixed blade broadhead designed for increased penetration. Great for lower kinetic energy setups. Features skeltonized blades for maximum cutting diameter and bleeder blades for better blood trails. Cutting Diameter: 1 1/16".
Broadheads featuring a modular weight system that allows the weight to be changed from 100 gr. to 125 gr. Features .051” thick Teflon coated blades with bleeder blades for increased cutting surface while maintaining true flight.
Dead Right There has a 1 13/16 total cutting surface, 1 3/16 main blade, and .051 inch blade thickness. D.R.T.'s come with MWS so they can be shot as 100gr or 125 gr.
Broadheads featuring a modular weight system that allows the weight to be changed from 100 gr. to 125 gr. Features .051” thick Teflon coated blades with bleeder blades for increased cutting surface while maintaining true flight.
Broadheads featuring a modular weight system that allows the weight to be changed from 100 gr. to 125 gr. Features .051” thick Teflon coated blades with bleeder blades for increased cutting surface while maintaining true flight.
Broadheads featuring a modular weight system that allows the weight to be changed from 100 gr. to 125 gr. Features .051” thick Teflon coated blades with bleeder blades for increased cutting surface while maintaining true flight.
Broadheads featuring a modular weight system that allows the weight to be changed from 150 gr. to 175 gr. Features .051” thick Teflon coated blades with bleeder blades for increased cutting surface while maintaining true flight.
Broadheads featuring a modular weight system that allows the weight to be changed from 100 gr. to 125 gr. Features .051” thick Teflon coated blades with bleeder blades for increased cutting surface while maintaining true flight.
Fixed, 3 blade, 100 grain broadhead that provides exceptional stability, quick kill impact and astounding field point accuracy. Cutting ring design acts as a stabilizer, allowing air to pass through the center of the ring. 1" cutting diameter.
The B.M.P. practice head is a ballistic match to the Montec broadhead. Safe to use on any target. Practice all year knowing your Montec will have the same flight as the B.M.P.
The B.M.P. practice head is a ballistic match to the Montec broadhead. Safe to use on any target. Practice all year knowing your Montec will have the same flight as the B.M.P.
The Montec Broadhead’s foolproof design combines tough one-piece, 100 percent stainless steel construction specifically designed for hunting. Made with G5 patented MIM manufacturing MonoFlow technology for unsurpassed durability and penetration. This broadhead features strong multi-tapered blades, a cut-on-contact nose, and easy-to-sharpen edges. All G5 broadheads are spin tested for maximum accuracy. With no components to assemble or replace, simply screw it on and shoot.
The Montec Broadhead’s foolproof design combines tough one-piece, 100 percent stainless steel construction specifically designed for hunting. Made with G5 patented MIM manufacturing MonoFlow technology for unsurpassed durability and penetration. This broadhead features strong multi-tapered blades, a cut-on-contact nose, and easy-to-sharpen edges. All G5 broadheads are spin tested for maximum accuracy. With no components to assemble or replace, simply screw it on and shoot.
The Montec Broadhead’s foolproof design combines tough one-piece, 100 percent stainless steel construction specifically designed for hunting. Made with G5 patented MIM manufacturing MonoFlow technology for unsurpassed durability and penetration. This broadhead features strong multi-tapered blades, a cut-on-contact nose, and easy-to-sharpen edges. All G5 broadheads are spin tested for maximum accuracy. With no components to assemble or replace, simply screw it on and shoot.
The Montec Broadhead’s foolproof design combines tough one-piece, 100 percent stainless steel construction specifically designed for hunting. Made with G5 patented MIM manufacturing MonoFlow technology for unsurpassed durability and penetration. This broadhead features strong multi-tapered blades, a cut-on-contact nose, and easy-to-sharpen edges. All G5 broadheads are spin tested for maximum accuracy. With no components to assemble or replace, simply screw it on and shoot.
The Montec Broadhead’s foolproof design combines tough one-piece, 100 percent stainless steel construction specifically designed for hunting. Made with G5 patented MIM manufacturing MonoFlow technology for unsurpassed durability and penetration. This broadhead features strong multi-tapered blades, a cut-on-contact nose, and easy-to-sharpen edges. All G5 broadheads are spin tested for maximum accuracy. With no components to assemble or replace, simply screw it on and shoot.
The Montec Broadhead’s foolproof design combines tough one-piece, 100 percent stainless steel construction specifically designed for hunting. Made with G5 patented MIM manufacturing MonoFlow technology for unsurpassed durability and penetration. This broadhead features strong multi-tapered blades, a cut-on-contact nose, and easy-to-sharpen edges. All G5 broadheads are spin tested for maximum accuracy. With no components to assemble or replace, simply screw it on and shoot.
100 percent steel, cut-on contact, fixed blade design features the ANIX blade-locking system with the convenience of easy to replace blades, ultra-sharp 0.030" thick blades, and a 1 1/8" cutting diameter.
100 percent steel, cut-on contact, fixed blade design features the ANIX blade-locking system with the convenience of easy to replace blades, ultra-sharp 0.030" thick blades, and a 1 1/8" cutting diameter.
Fixed three blade head with V notch tip, blades that are sharpened on all edges and have a .020” thickness on the sharpened edge and .035" on the base. They weigh 100 gr. And have a 1 3/16" cutting diameter.
Solid-core notched blade stretches, then slices hide for an exaggerated entry hole and better blood trails on down angle shots from treestand. Reversible blades are sharp on both sides. 100 grain. 1 1/8” cutting diameter. 3 pack.
Three blade fixed blade broadhead features exclusive Blade Alignment Technology with the patented Center Locking System allowing you to tune and align the broadheads to your carbon arrows with a simple twist of the tuning stud, flattening arrow flight and dramatically improving groups. Special Endur-Edge tempering process helps the blade hold its edge longer. 3-blade, 1-1/16" cutting diameter.
Stainless broadhead features BAT(Blade Alignment Technology) that allows perfect precision in blade orientation on carbon arrows without refletching or repositioning nocks.
Fixed blade broadhead features a hardened stainless steel base and Blade Alignment Technology allowing the tip to tighten into the base allowing for blade assembly adjustment.
A fixed blade cut on contact broadhead that features a 1 1/4” cutting diameter. Blade features a thickness of .059” and is made of knife grade stainless steel with a patented diamond tip.
A fixed blade cut on contact broadhead that features a 1 1/4” cutting diameter. Blade features a thickness of .059” and is made of knife grade stainless steel with a patented diamond tip.
Four blade, fixed blade cut on contact broadhead that features a 1 ¼” cutting diameter on the main blade and a 7/8” cutting diameter on the bleeder blade. Main blade features a thickness of .059 thousands of an inch and the bleeder blade features a .040 thousands of an inch thickness. Made of knife grade stainless steel with a patented diamond tip.
Four blade, fixed blade cut on contact broadhead that features a 1 ¼” cutting diameter on the main blade and a 7/8” cutting diameter on the bleeder blade. Main blade features a thickness of .059 thousands of an inch and the bleeder blade features a .040 thousands of an inch thickness. Made of knife grade stainless steel with a patented diamond tip.
Two blade, fixed blade cut on contact broadhead that features a 1 1/4” cutting diameter. Blade features a thickness of .059”. Made of knife grade stainless steel with chiseled serrated edge and a patented diamond tip.
Two blade, fixed blade cut on contact broadhead that features a 1 1/4” cutting diameter. Blade features a thickness of .059”. Made of knife grade stainless steel with chiseled serrated edge and a patented diamond tip.
Four blade, fixed blade cut on contact broadhead that features a 1 ¼” cutting diameter on the chiseled serrated edge main blade and a 7/8” cutting diameter on the bleeder blade. Main blade features a thickness of .059 thousands of an inch and the bleeder blade features a .040 thousands of an inch thickness. Made of knife grade stainless steel with a patented diamond tip.
Four blade, fixed blade cut on contact broadhead that features a 1 ¼” cutting diameter on the chiseled serrated edge main blade and a 7/8” cutting diameter on the bleeder blade. Main blade features a thickness of .059 thousands of an inch and the bleeder blade features a .040 thousands of an inch thickness. Made of knife grade stainless steel with a patented diamond tip.
Precision-machined and spin-tested for perfect flight, razor-sharp and made from stainless steel, integrates the strength of a one-piece head with a cut-on-contact tip.
Precision-machined and spin-tested for perfect flight, razor-sharp and made from stainless steel, integrates the strength of a one-piece head with a cut-on-contact tip.
Incorporates a chiseled serration for more effective cutting inside an animal, made from knife-grade stainless steel and is shaving sharp right out of the package, precision-machined and spin-tested for perfect flight every time.
Made from knife grade stainless steel, it is razor sharp out fo the package. The ferrule is made from aircraft quality aluminum and offers perfect flight because it is spin tested for perfect alignment. The patented diamond tip can take on the toughest of hides and bone splitting penetration.
Made from knife grade stainless steel, it is razor sharp out fo the package. The ferrule is made from aircraft quality aluminum and offers perfect flight because it is spin tested for perfect alignment. The patented diamond tip can take on the toughest of hides and bone splitting penetration.
Made from knife grade stainless steel, it is razor sharp out fo the package. The ferrule is made from aircraft quality aluminum and offers perfect flight because it is spin tested for perfect alignment. The patented diamond tip can take on the toughest of hides and bone splitting penetration.
Made from knife grade stainless steel, it is razor sharp out fo the package. The ferrule is made from aircraft quality aluminum and offers perfect flight because it is spin tested for perfect alignment. The patented diamond tip can take on the toughest of hides and bone splitting penetration.
Made from knife grade stainless steel, it is razor sharp out fo the package. The ferrule is made from aircraft quality aluminum and offers perfect flight because it is spin tested for perfect alignment. The patented diamond tip can take on the toughest of hides and bone splitting penetration.
Incorporates a chiseled serration for more effective cutting inside an animal, made from knife-grade stainless steel and is shaving sharp right out of the package, precision-machined and spin-tested for perfect flight every time.
Incorporates a chiseled serration for more effective cutting inside an animal, made from knife-grade stainless steel and is shaving sharp right out of the package, precision-machined and spin-tested for perfect flight every time.
Incorporates a chiseled serration for more effective cutting inside an animal, made from knife-grade stainless steel and is shaving sharp right out of the package, precision-machined and spin-tested for perfect flight every time.
Incorporates a chiseled serration for more effective cutting inside an animal, made from knife-grade stainless steel and is shaving sharp right out of the package, precision-machined and spin-tested for perfect flight every time.
Incorporates a chiseled serration for more effective cutting inside an animal, made from knife-grade stainless steel and is shaving sharp right out of the package, precision-machined and spin-tested for perfect flight every time.
Fixed blade broadhead constructed of a 7075-T6 aircraft grade aluminum ferrule, a stainless steel point over tip and 0.040 thick 420 stainless steel blades sharpened to a .2 on the BSI index. Features a 1.125” cutting diameter.
3-blade design with a ultra short profile and thicker blades than the standard 3-blade Muzzy. Features 1 1/4" cutting diameter, .025" thick blades and trocar tip.
3-blade design with a ultra short profile and thicker blades than the standard 3-blade Muzzy. Features 1 3/16" cutting diameter, .025" thick blades and trocar tip.
3-blade design with a ultra short profile and thicker blades than the standard 3-blade Muzzy. Features 1 3/16" cutting diameter, .025" thick blades and trocar tip.
100 grain 4 blade Broadhead with a shorter profile, wider cut, and thicker blades than Muzzy's standard 4-blade design. Features 1 1/8" cutting diameter, .025" thick blades and trocar tip.
Utilizes an ultra compact solid steel design with .050" blades that devastates soft tissue on impact leaving massive wound channels and quick recoveries.
Utilizes an ultra compact solid steel design with .050" blades that devastates soft tissue on impact leaving massive wound channels and quick recoveries.
Supreme fixed blade design with a 1-3/16" cutting diameter, engineered for toughness and accuracy, helix blade design provides supreme field point performance at long range.
Three blade, fixed blade broadhead designed for ultra-high speed bows and crossbows. Offset blade design for larger entrance holes. .027in thick blades. 1-1/8in cutting diameter.
Fixed blade broadhead featuring a micro grooved ferrule for increased flight accuracy and penetration. Built with a trophy tip and replaceable Diamize blades for quick, clean kills. Cutting Diameter: 1 3/16".
Fixed blade broadhead featuring a micro grooved ferrule for increased flight accuracy and penetration. Built with a trophy tip and replaceable Diamize blades for quick, clean kills. Cutting Diameter: 1 3/16".
Fixed blade broadhead featuring a micro grooved ferrule for increased flight accuracy and penetration. Built with a trophy tip and replaceable Diamize blades for quick, clean kills. Cutting Diameter: 1 1/8".
The Thunderhead Nitro is a 3 blade fixed broadhead. Featuring all steel construction and pin point accuracy even with the fastest bows and crossbows. Has a 1 1/16” cutting diameter.
Three blade head that comes fully assembled and ready to shoot. This head features an offset blade alignment and streamlined geometry aiding in tuning and accuracy out of today's faster bows. Cutting Diameter: 1 1/8".
Super short design produces field point accuracy in a fixed blade broadhead with 1 1/4” cutting diameter. Super strong .040” blades are swept back over the shaft for an extremely compact profile. The steep cutting angle and hardened SST tip provide devastating penetration and consistent pass throughs.
Super short design produces field point accuracy in a fixed blade broadhead with 1 1/4” cutting diameter. Super strong .040” blades are swept back over the shaft for an extremely compact profile. The steep cutting angle and hardened SST tip provide devastating penetration and consistent pass throughs.
Super short design produces field point accuracy in a fixed blade broadhead with 1 1/4” cutting diameter. Super strong .040” blades are swept back over the shaft for an extremely compact profile. The steep cutting angle and hardened SST tip provide devastating penetration and consistent pass throughs.
Super short design produces field point accuracy in a fixed blade broadhead with 1 1/4” cutting diameter. Super strong .040” blades are swept back over the shaft for an extremely compact profile. The steep cutting angle and hardened SST tip provide devastating penetration and consistent pass throughs.
Features super strong stainless steel blade locking technology and a Double-Scallop point for deep penetration. Solid one piece stainless steel ferrule is compact and durable, ability to crush through even the toughest bone. Blade thickness: .030", LPS Cutting Diameter: 1".
Features super strong stainless steel blade locking technology and a Double-Scallop point for deep penetration. Solid one piece stainless steel ferrule is compact and durable, ability to crush through even the toughest bone. Blade thickness: .030", HPV Cutting Diameter: 1.1875".
The Rival 100 takes the super strong blade locking of the Titanium Signature series and blends it with the smaller Double-Scallop point from the deep penetrating Ti-Con series. The solid one piece Stainless steel ferrule is more compact than it’s titanium counter-parts, yet maintains durability, slick surface finish and ability to crush through even the toughest bone. 1 3/16" cutting diameter.
The Rival 100 takes the super strong blade locking of the Titanium Signature series and blends it with the smaller Double-Scallop point from the deep penetrating Ti-Con series. The solid one piece Stainless steel ferrule is more compact than it’s titanium counter-parts, yet maintains durability, slick surface finish and ability to crush through even the toughest bone. 1" cutting diameter.