Since 1998, eders.com has offered the largest selection archery and hunting equipment at the best prices. For even more savings on Archery and BowHunting Supplies, Join our Professional Bowhunter Buyer's Club, membership is NOW FREE for all.
Get Free Standard Shipping on all orders over $200.00. Just type: freeshipping in the coupon field during checkout.
TSA accepted combination padlocks that provide convenient and secure airport cargo inspection. Allows you to set your own combination and are easily recognizable by TSA screeners.
Dry-Tek Handgun Bag offers two-layer padding that draw moisture from the inner bag and passes it through the one-way laminate membrane outer layer allowing water molecules to exit the bag, not enter. Other features include heavy-duty zippers, Slide-Through padlock system, exterior zipper pockets and two padlock locations. 10" length.
Designed to accommodate most parallel limb bows with quiver, sight, and stabilizer attached. Features molded bumper protection and padded interior for secure storage of your gear. Includes holder for up to one dozen arrows.
The 3i-3613-BXB has been designed specifically to fit the Ravin R9, R10, R15, R20, and R20 Sniper Edition crossbows, as well as the TenPoint Shadow NXT and Stealth NXT models. Featuring watertight, dustproof, military-grade construction, this iSeries case was built to meet all the demands and specifications of the US Military, and is the perfect solution to protect your valuable crossbow investment.
This case easily converts from a single bow case to a double bow case in seconds and offers all of the features of the iSeries cases. Features a bunk bed style foam divider with a removable, adjustable accessory tray on the lower level to hold one bow plus all of your arrows, a long target stabilizer, quiver and other accessory items. By removing the accessory tray, the case will accommodate two bows, one up to 42� and the other up to 40�. The Ultimate Single/Double Bow Case features four trigger latches with four reinforced padlock locations for a customer supplied lock, cushioned snap-down handles on three sides and recessed, in-line skate style wheels. Waterproof and dustproof.
This case easily converts from a single bow case to a double bow case in seconds and offers all of the features of the iSeries cases. Features a bunk bed style foam divider with a removable, adjustable accessory tray on the lower level to hold one bow plus all of your arrows, a long target stabilizer, quiver and other accessory items. By removing the accessory tray, the case will accommodate two bows, one up to 46� and the other up to 44�. The Ultimate Single/Double Bow Case features four trigger latches with four reinforced padlock locations for a customer supplied lock, cushioned snap-down handles on three sides and recessed, in-line skate style wheels. Waterproof and dustproof.
Injection molded case has four SKB patented trigger latches, four reinforced padlock locations, cushioned snap down handles on three sides and recessed, in-line skate style wheels, to ensure that transporting your gear around the world is both worry and trouble free. The interior of the case features a custom foam insert and repositionable tie downs for secure fit and cushioning of your gear and a water jet cut foam arrow system that holds up to a dozen arrows.
Injection molded waterproof utility case is made of ultra high-strength polypropylene copolymer resin. Convoluted and EPS foam interior for cushioned protection. Resistant to corrosion and impact damage, trigger release latch system, comfortable snap-down rubber over-molded cushion grip handle. Four reinforced stainless steel padlock locations. Lifetime warrenty. Interior diamenisions 49 in L X 9 in W X 5 in D.
Single Rifle Case is a high-strength, polypropylene copolymer resin shell with a convoluted and EPS foam interior that accommodates a single rifle up to 49". Other features include waterproof and dust tight design, over-molded cushion grip handle, reinforced stainless steel padlock locations, automatic ambient pressure equalization valve, Unconditional Lifetime Warranty, 49"x9"x5", 16 lbs.
Injection molded waterproof utility case is made of ultra high-strength polypropylene copolymer resin. Convoluted and EPS foam interior for cushioned protection. Resistant to corrosion and impact damage, trigger release latch system, comfortable snap-down rubber over-molded cushion grip handle. Four reinforced stainless steel padlock locations. Lifetime warrenty. Interior diamenisions 49 in L X 9 in W X 5 in D.
Single Rifle Case is a high-strength, polypropylene copolymer resin shell with a convoluted and EPS foam interior that accommodates a single rifle up to 49". Other features include waterproof and dust tight design, over-molded cushion grip handle, reinforced stainless steel padlock locations, automatic ambient pressure equalization valve, Unconditional Lifetime Warranty, 49"x9"x5", 16 lbs.
Injection molded waterproof utility case is made of ultra high-strength polypropylene copolymer resin. Convoluted and EPS foam interior for cushioned protection. Resistant to corrosion and impact damage, trigger release latch system, comfortable snap-down rubber over-molded cushion grip handle. Four reinforced stainless steel padlock locations. Lifetime warrenty. Interior diamenisions 49 in L X 9 in W X 5 in D.
Lighter and 2.8x stronger than the competition’s cases, Watertight and dustproof, Meets Military Standards and manufactured to withstand the toughest conditions, Resistant to impact damage, UV, solvents, corrosion, and fungus, Lifetime Warranty, 100% Made in the USA and fully warranted for the life of the case to the original owner. Fits scoped rifles up to 49" long.
Custom Single Pistol Case is designed to fit a single pistol along with accessories. The high-density foam interior offers a custom fit cutout to fit various pistols with two accessory slot for additional gear. Other features include a completely watertight gasket seal, Automatic ambient pressure equalization valve, rubber over-molded cushion grip handle and two padlock locations. 12"x9"x4.5", 5 lbs.
Custom Single Pistol Case is designed to fit pistol along with accessories. The high-density foam interior offers a custom fit cutout to fit various pistols with an accessory slot for additional gear. Other features include a completely watertight gasket seal, Automatic ambient pressure equalization valve, rubber over-molded cushion grip handle and two padlock locations.
Injection molded watertight parallel limb bow case features a custom foam insert for secure positioning of your gear and padded protection. Includes a foam arrow system which holds up to a dozen arrows, wheels, reinforced padlock holes, and three cushioned carry handles.
Injection molded watertight parallel limb bow case features a custom foam insert for secure positioning of your gear and padded protection. Includes a foam arrow system which holds up to a dozen arrows, wheels, reinforced padlock holes, and three cushioned carry handles.
Injection molded watertight parallel limb bow case features a custom foam insert for secure positioning of your gear and padded protection. Includes a foam arrow system which holds up to a dozen arrows, wheels, reinforced padlock holes, and three cushioned carry handles.
Injection molded watertight parallel limb bow case features a custom foam insert for secure positioning of your gear and padded protection. Includes foam arrow system which holds up to a dozen arrows, wheels, reinforced padlock holes, and three cushioned carrying handles.
Injection molded watertight parallel limb bow case features a custom foam insert for secure positioning of your gear and padded protection. Includes a foam arrow system which holds up to a dozen arrows, wheels, reinforced padlock holes, and three cushioned carry handles.
The iSeries 3019-12 Mission Sub-1 Crossbow Case is an injection molded, watertight case featuring a custom cut high density foam to fit a Sub-1 Crossbow, quiver, and accessories, along with wheels and a tow handle for easy transport. Interior Dimensions: 30.00" L x 19.50" W x 12.00" D.
Injection Molded Mil-Standard Waterproof Cases are molded of ultra high-strength polypropylene copolymer resin, featuring a gasketed, water and dust tight, Features a molded-in hinge for added protection, trigger release latch system, comfortable, snap-down rubber over-molded cushion grip handle. Padlock holes. Lifetime warrenty. Inside diamenisions 12 in L X 8 in W X 3.25 in D.
Injection Molded Mil-Standard Waterproof Cases are molded of ultra high-strength polypropylene copolymer resin, featuring a gasketed, water and dust tight, Features a molded-in hinge for added protection, trigger release latch system, comfortable, snap-down rubber over-molded cushion grip handle. Padlock holes. Lifetime warrenty. Interior diamenisions 7.5 in L X 5 in W X 3.25 in D.
Injection Molded Mil-Standard Waterproof Cases are molded of ultra high-strength polypropylene copolymer resin, featuring a gasketed, water and dust tight, Features a molded-in hinge for added protection, trigger release latch system, comfortable, snap-down rubber over-molded cushion grip handle. Padlock holes. Lifetime warrenty. Inside diamenisions 8.5 in L X 6 in W X 3.75 in D.
Injection Molded Mil-Standard Waterproof Cases are molded of ultra high-strength polypropylene copolymer resin, featuring a gasketed, water and dust tight, Features a molded-in hinge for added protection, trigger release latch system, comfortable, snap-down rubber over-molded cushion grip handle. Padlock holes. Lifetime warrenty. Inside diamenisions 10.75 in L X 6.13 in W X 3.25 in D.
Double M4 / Short Rifle Case offers maximum protection for two rifles or M4 style short rifles up to 36" in length with two layers of 'bunk bed' storage. Other features include foam divider, waterproof and dust tight design, over-molded cushion grip handle, TSA key locking latches, molded-in hinge, in-line style wheels, ambient pressure equalization valve, Unconditional Lifetime Warranty, and $1500 Content Coverage. 36.5"x14.5"x5.5", 20 lbs.
Double Rifle Case interior cavity features a fabric lining with molded EPS lid and base liners for structural strength and rifle separation holding rifels up to 48" in length. Other features include rigid foam dividers, waterproof and dust tight design, snap-down over-molded cushion grip handle, TSA key locking latches, molded-in hinge, in-line style wheels, ambient pressure equalization valve, Unconditional Lifetime Warranty, and $1500 Content Coverage. 49"x13.5"x3.5", 25 lbs.
Lighter and 2.8x stronger than the competition’s cases, Watertight and dustproof, Meets Military Standards and manufactured to withstand the toughest conditions, Resistant to impact damage, UV, solvents, corrosion, and fungus, Lifetime Warranty, 100% Made in the USA and fully warranted for the life of the case to the original owner. Fits 2 take-down recurve risers and 2 sets of limbs, with storage for arrow quivers and stabilizers up to 38" long.
Injection molded watertight double bow case features a rigid foam bunk-bed system for secure storage of two parallel limb bows or a combination of a bow and a rifle. Includes inline skate wheels, reinforced padlock holes, and three cushioned carrying handles.
Injection molded watertight double bow case features a foam bunk-bed system with rigid dividers for secure storage of 2 parallel limb bows or a combination of a bow and rifle. Includes inline skate wheels, reinforced padlock holes, and three cushioned carrying handles.
Injection molded watertight double bow case features a rigid foam bunk-bed system for secure storage of 2 parallel limb bows or a combination of a bow and rifle. Includes inline skate wheels, reinforced padlock holes, and three cushioned carrying handles.
Injection molded watertight double bow case features a rigid foam bunk-bed system for secure storage of two parallel limb bows or a combination of a bow and a rifle. Includes inline skate wheels, reinforced padlock holes, and three cushioned carrying handles. Comes with a lifetime warranty and content coverage for gear damaged by an airline.
Injection molded watertight double bow case features a rigid foam bunk-bed system for secure storage of two parallel limb bows or a combination of a bow and a rifle. Includes inline skate wheels, reinforced padlock holes, and three cushioned carrying handles. Comes with a lifetime warranty and content coverage for gear damaged by an airline.
AR Rifle Case is an injection molded, watertight case offering pull-out foam holding a rifle up to 41" plus six additional accessory cavities. Other features include waterproof and dust tight design, snap-down rubber over-molded cushion grip handles, TSA key locking latches, Molded-in hinge, in-line style wheels, ambient pressure equalization valve, Unconditional Lifetime Warranty, and $1500 Content Coverage. 42.5"x14.5"x5.5", 21 lbs.
iSeries TenPoint Havoc Crossbow Case provides features and protection to confidently transport Havoc RS440 and Siege RS410 crossbows. This mil-standard waterproof case is molded from ultra-high-strength polypropylene copolymer resin, featuring a gasketed, water and dust tight, submersible design that resists corrosion and impact damage. Features include a molded-in-hinge, patented latch system, snap-down rubber over-molded cushion grip handle, automatic ambient pressure equalization valve, and in-line skate style wheels. This case is resistant to UV, solvents, corrosion, fungus, and impact damage.
The TenPoint Vengent and Viper Crossbow Case is molded from ultra-high strength polypropylene copolymer resin, material specified by the U.S. military for cases and containers. It features a gasketed, water and dust-tight submersible design resistant to UV, solvents, corrosion, fungus, and impact damage. The case features a continuous molded-in hinge with stainless steel pins, a patented "trigger release" latch system, and a comfortable, snap-down, rubber over-molded handles.
The TenPoint Vapor Crossbow Case is molded from ultra-high-strength polypropylene copolymer resin, material specified by the U.S. military for cases and containers. It features a gasketed, water and dust-tight submersible design resistant to UV, solvents, corrosion, fungus, and impact damage. The case features a continuous molded-in hinge with stainless steel pins, a patented "trigger release" latch system, and a comfortable, snap-down, rubber over-molded handles.
This case is designed specifically to fit the Tenpoint Nitro XRT and Nitro X crossbows. Features include watertight, dustproof, military-grade construction, cushion grip handles, ambient pressure equalization valve, and stainless steel padlock protector clips. 36"x13.5"x12" interior, 27.23 lbs.
This case is designed specifically to fit the Ravin R26 and R29 crossbows. Features include watertight, dustproof, military-grade construction, cushion grip handles, ambient pressure equalization valve, and stainless steel padlock protector clips. 30"x19.5"x12" interior, 33.81 lbs.
The 3i-3424-12BC iSeries Crossbow Case features a molded-in hinge, patented trigger release latch system, comfortable, snap-down rubber over-molded cushion grip handle, automatic ambient pressure equalization valve, resistance to UV, solvents, corrosion, fungus and impact damage, four in-line wheels for easy transport and cubed pick-and-pluck style foam which enables users to customize their interior to ensure a precise fit for most crossbows and gear. This case is molded of ultra-high-strength polypropylene copolymer resin, featuring a gasketed, water and dust tight, submersible design that is resistant to corrosion and impact damage. Interior Dimensions: 34.50" L x 24.50" W x 12.75" D.
SKB iSeries Large Black Bow Case. Water tight polypropylene copolymer resin hard case with gasket sealed lid and pressure equalizing valve. Padlock loops and handle with rubber overmold. Features a lined interior that fits bows up to 41.25" long and 16" wide. Has lid storage for quiver, arrows, and accessory boxes (Sold separately).
This hybrid bow case is constructed of a durable weather resistant 600 denier ballistic nylon exterior with a rigid foam interior. Features 3 exterior pockets for arrow case and other accessories. Holds 1 riser and 2 sets of limbs. Includes shoulder strap.
SKB Hybrid Soft Cases feature a rugged, weather resistant 600 Denier ballistic nylon exterior and a fully lined rigid foam interior that provides enough room for a bow with quiver attached, arrows, and accessories
The Hybrid Breakdown Shotgun Case combines the protection of rigid foam, layered with a weather resistant 600 Denier ballistic nylon shell. Other features include a plush lined EPS interior that accommodates barrels up to 33.75" and two external accessory pouches. 34"x9"x5.5" interior, 7 lbs.
This hybrid bow case is constructed of a durable weather resistant 600 denier ballistic nylon exterior with a rigid foam interior. Features 4 exterior pockets for arrow case and other accessories, hook and loop straps for secure positioning and a shoulder strap. Fits bows up to 40� long.
Made from rugged 600 denier ballistic nylon with a durable double zipper pull closure and padlock loops. Designed to fit wider bows. Features an external pouch for accessory storage and an adjustable padded shoulder strap for hands free transport.
The Hunter Series XL Bow Case is designed to accommodate wider style bows with the quiver attached at an affordable price point. Features a rigid shaped ABS shell with stylish embossing that actually adds structural support to the lid with an eight point interlocking stacking system. The Perfect-Match valance bending system provides a tight and secure fit to prevent dirt, dust and moisture from the interior of the case with lockable draw-bolt metal latches and a comfortable carrying handle. Features plush lined EPS inserts for maximum impact resistance and new state of the art water-jet cut polyethylene foam arrow system that will accommodate up to a dozen arrows.
The Hunter Series Bow Case is designed to accommodate most of the best selling bows on the market with the quiver attached at an affordable price point. Features a rigid shaped ABS shell with stylish embossing that actually adds structural support to the lid with an eight point interlocking stacking system. The Perfect-Match valance bending system provides a tight and secure fit to prevent dirt, dust and moisture from the interior of the case with lockable draw-bolt metal latches and a comfortable carrying handle. Features plush lined EPS inserts for maximum impact resistance and new state of the art water-jet cut polyethylene foam arrow system that will accommodate up to a dozen arrows.
Features a custom insert for secure positioning and cushioning of your gear. New state of the art water-jet cut foam arrow system that holds up to a dozen arrows is included. Interior Dimensions: 41.00" L x 15.50" W x 5.00"D.
Double Rifle Case is an affordable hardshell case with EPS lid and base inserts for additional structural integrity and durability. Other features include a Perfect Match Valance creating a perfect seal, beefy injection molded latches and rugged construction. 50"x13"x5" interior, 19 lbs.
Lighter and 2.8x stronger than the competition’s cases, Watertight and dustproof, Meets Military Standards and manufactured to withstand the toughest conditions, Resistant to impact damage, UV, solvents, corrosion, and fungus, Lifetime Warranty, 100% Made in the USA and fully warranted for the life of the case to the original owner. Layered foam interior measuring 7" x 2" 1"
Case features the Bowtech logo, built to military standards with trigger release latch sysytem and four reinforced padlock holes include stainless steel protector clips, cushioned snap down handles on three sides, in-line skate style wheels, transporting your gear around the world is both worry and trouble free. The interior features custom foam inserts for the bow, and quiver with accessory box compartments will hold upto four boxes (sold seperatly) with secure positioning and cushioning of your gear. New state of the art water-jet cut foam arrow system holds up to a dozen arrows.The iSeries injection molded waterproof cases are constructed of ultra high-strength polypropylene copolymer resin and feature a gasketed, waterproof and dustproof. Interior diamenisions 39.5 in L X 16.5 in W X 7 in D.
Provides rigid, padded bow protection in compartment with secure straps. Five convenient pockets for accessories in the bottom compartment with room above for clothes and other essentials. Comes with XL heavy duty wheels for easy movement. Lightweight at 13lbs. Built in black rail guards. Padded, reinforced handles and ID pocket. Interior diamenisions 42 in L X 20 in W X 13 in D.
Built to ATA 300 Category 1 specs, the ATA Short Double Rifle Case offers two layers of 'bunk bed' storage protecting two rifles up to 39" in length. Other features include foam divider, HDPE hardshell with weather protection O-ring seal, carry and tow handles, bumper protection hardware, built-in poly wheels, Unconditional Lifetime Warranty, and $1500 Content Coverage. 40"x9"x6", 19 lbs.
The SKB ATA Parallel Limb Double Bow Case features heavy duty field replaceable locking latches, spring-loaded end handle for comfortable towing and protection from damage, molded in bumper protection to maximize impact resistance and quiet glide heavy duty wheels for easy transport, secure "tie-down" loops for ATV transport are an added feature and stylish embossing that actually adds structural support to the lid. 50" x 15.5" x 6".
The SKB ATA Parallel Limb Double Bow Case features heavy duty field replaceable locking latches, spring-loaded end handle for comfortable towing and protection from damage, molded in bumper protection to maximize impact resistance and quiet glide heavy duty wheels for easy transport, secure "tie-down" loops for ATV transport are an added feature and stylish embossing that actually adds structural support to the lid. 41" x 15.5" x 6".
The SKB Arrow Case features an ABS molded shell, nickel plated buckle latches and heavy duty, high density foam arrow holders that hold arrows up to 33.5� long.
Constructed of durable 600 Denier Cross-dyed fabric, this case features accessory pockets inside and out, hidden backpack straps, a shoulder strap which converts into a bow sling, and a long exterior pocket that's perfect for an arrow box.