Cart is Empty
Cable guard dampener designed not to interfere with your sight window. Can be placed in front of the cable slide to act as cable guard stop.
|
Solid limb dampener created for slim limb compound and recurve bows. The base of the limb dampener is 15/16" and adheres by a strong double sided tape provided.
|
The four dot stopper is made of a super soft polymer that is very quiet and long lasting. Made to fit on all manufactures 3/8" cable guard rods. Uses a four dot system to align the string completely in the middle of the stopper to eliminate alignment problems with the string.
|
The four dot stopper is made of a supper soft polymer that is very quiet and long lasting. Made to fit on all manufacturers 3/8"string stop rods. Uses a four dot system to align the string completely in the middle of the stopper to eliminate alignment problems with the string.
|
The four dot stopper is made of a super soft polymer that is very quiet and long lasting. Made to fit on all manufactures 3/8" cable guard rods. Uses a four dot system to align the string completely in the middle of the stopper to eliminate alignment problems with the string.
|
All new softer polymer material with a higher tensile strength dampens vibration and noise. Slides over cable guard and acts as a cable slide stop.
|
The most complete kit. It has 2 universally sized split limb dampeners, a pair of stirrup dampeners, 4 of the heavy duty crossbow string silencers, and 1 bolt spring dampener. This kit comes in black and everything can be installed without a bow press except the string silencers. The stirrup dampeners go on easy if your stirrup has a screw to detach it from the crossbow, then you simply unscrew it and slide these dampeners on. The limb dampeners are universally sized to fit gaps between 3/8" up to 1 1/8" wide.
|
This kit contains a pair of split limb Monsterjax, four Crossbow Slipjax string silencers and one retention bolt dampener.
|
This kit contains a pair of solid limb Monsterjax, four Crossbow Slipjax string silencers and one retention bolt dampener.
|
This kit contains a pair of split limb Monsterjax, four Crossbow Slipjax string silencers and one retention bolt dampener.
|
Split Limb Dampeners install easily without the use of a bowpress. Dampeners fit limb gaps on split limb crossbows from 3/8" to 1 1/8" and lock into position with the provided screws. The retention spring dampener (included) easily slides over the tip of the sprint into position. Adhesives not necessary for installation.
|
Crossbow MacDaddy Sting Suppressors feature a soft polymer molded over the top of a durable inner stopper. Simply slide them over existing rods, no glue or adhesive needed. Fit 3/8� rods. This stopper is 2� long and has a 1� diameter face where the string comes in contact.
|
Crossbow Slipjax fit in between string strands. Dimples retain the silencer in the string. Thick string silencers made of durable polymer. Weigh 23 grains each. 4 pack.
|
Softer polymer material with a high tensile strength dampens limb vibration and noise up to 80 percent. Flexible arms touch against the bow limbs drawing vibration and noise away from the shot.
|
This two stage stopper uses a softer polymer bonded over a stiffer polymer to create a stopper that is more durable and better at dampening, and fits all 3/8in rod string suppression systems.
|
Magnum limb dampeners extend the life of your bow limbs. They have thick rubber pads that go in between the limbs for maximum vibration control. No bow press needed. Simply install with the provided screws.
|
Magnum limb dampeners extend the life of your bow limbs. They have thick rubber pads that go in between the limbs for maximum vibration control. No bow press needed. Simply install with the provided screws.
|
Fits on compound bows with 1/2" cut-out holes in the riser. They screw together and fit most machined aluminum risers. Comes with large rubber washers to cushion the grip and provide an extra measure of bow dampening.
|
Fits on compound bows with 1/2" cut-out holes in the riser. They screw together and fit most machined aluminum risers. Comes with large rubber washers to cushion the grip and provide an extra measure of bow dampening.
|
Dampeners can be installed on a stabilizer to reduce vibration. Fits stabilizers with 5/8� -1� outside diameter. 2/pk.
|
Dampeners can be installed on a stabilizer to reduce vibration. Fits stabilizers with 5/8� -1� outside diameter. 2 pk.
|
Dampeners can be installed on a stabilizer to reduce vibration. Fits stabilizers with 5/8� -1� outside diameter. 2 pk.
|
4-arm dampener helps dampen noise and vibration for your stabilizer. The only stabilizer module designed that has 4 arms with balls at the end for maximum stability and control. 5/16" x 24 thread, weights 2.25 ounces.
|
The solid limb MonsterJax features a patented design. The new monster jax works by utilizing 6 arms that vibrate at different frequencies to dampen noise and vibration. This version of monsterjax are made specifically for a crossbow. The base is reinforced for strength, and the dampener is even a different strength more suitable to the strong forces of a crossbow. Easy installation with self-adhesive tape already installed, simply pull off the blue backing. Placement: Try placing them about half-way between the riser and the tips of the limb for maximum effectiveness.
|
Limb silencer helps quiet bow noise and jump during the shot. New design features six vibration eating arms for even more repeatable accuracy.
|
Limb silencer helps quiet bow noise and jump during the shot. New design features six vibration eating arms for even more repeatable accuracy.
|
Limb silencer helps quiet bow noise and jump during the shot. New design features six vibration eating arms for even more repeatable accuracy.
|
Slides snuggly over any manufacture's crossbow bolt retention spring to dampen any twang or vibration noise that is produced when firing your crossbow. No glue or any type of adhesive needed. Won't interfere with bolt fletching or travel.
|
Limb dampeners designed for split limb bows. X-shaped dampener wedges snugly between the limbs without the use of screws or adhesives. 11/16� size fits Hoyt and newer BowTech with split limbs. 15/16� size fits bows with wider gaps such as Mathews, PSE, and Bear.
|
Limb dampeners designed for split limb bows. X-shaped dampener wedges snugly between the limbs without the use of screws or adhesives. 11/16� size fits Hoyt and newer BowTech with split limbs. 15/16� size fits bows with wider gaps such as Mathews, PSE, and Bear.
|
Limb dampeners designed for split limb bows. X-shaped dampener wedges snugly between the limbs without the use of screws or adhesives. 11/16� size fits Hoyt and newer BowTech with split limbs. 15/16� size fits bows with wider gaps such as Mathews, PSE, and Bear.
|
Limb dampeners designed for split limb bows. X-shaped dampener wedges snugly between the limbs without the use of screws or adhesives. 11/16” size fits Hoyt and newer BowTech with split limbs. 15/16” size fits bows with wider gaps such as Mathews, PSE, and Bear.
|
Limb dampeners designed for split limb bows. X-shaped dampener wedges snugly between the limbs without the use of screws or adhesives. 11/16� size fits Hoyt and newer BowTech with split limbs. 15/16� size fits bows with wider gaps such as Mathews, PSE, and Bear.
|
Revelations Crossbow Kit includes (2) Limb dampeners designed for split limb bows and (2) Stirrup dampeners. X-shaped dampener wedges snugly between the limbs without the use of screws or adhesives. 11/16� size fits Hoyt and newer BowTech with split limbs. 15/16� size fits bows with wider gaps such as Mathews, PSE, and Bear.
|
Revelations Crossbow Kit includes (2) Limb dampeners designed for split limb bows and (2) Stirrup dampeners. X-shaped dampener wedges snugly between the limbs without the use of screws or adhesives. 11/16� size fits Hoyt and newer BowTech with split limbs. 15/16� size fits bows with wider gaps such as Mathews, PSE, and Bear.
|
Revelations Crossbow Kit includes (2) Limb dampeners designed for split limb bows and (2) Stirrup dampeners. X-shaped dampener wedges snugly between the limbs without the use of screws or adhesives. 11/16� size fits Hoyt and newer BowTech with split limbs. 15/16� size fits bows with wider gaps such as Mathews, PSE, and Bear.
|
Installs in seconds and easily slips over the end of the stabilizer. Improves accuracy and reduces vibration. Fits stabilizers with 3/4� outside diameter.
|
These soft elastomeric dampeners stretch over your stabilizer to help reduce vibration.
|
Cable guard dampener designed not to interfere with your sight window. Can be placed in front of the cable slide to act as cable guard stop.
|
String silencer installs between the strands of the string to reduce string noise. Designed for durability, even in the fastest bows.
|
Strategically places weight on your bowstring to gain velocity. Can be used with or without string silencers. Eliminates the need for speed buttons. Silences while improving speed. Installs by slipping over the string(bow press required). Weigh 16 grains each. 4 per pack.
|
Soft polymer material dampens limb vibration and noise. Install easily with the provided screws without a bowpress.
|
Soft polymer material dampens limb vibration and noise. Install easily with the provided screws without a bowpress.
|
Can be used with or without string silencers. Eliminates the need for speed buttons. Silences while improving speed. Installs by slipping over the string(bow press required). Weigh 16 grains each. 4 per pack.
|
Can be used with or without string silencers. Eliminates the need for speed buttons. Silences while improving speed. Installs by slipping over the string(bow press required). Weigh 16 grains each. 4 per pack.
|
Can be used with or without string silencers. Eliminates the need for speed buttons. Silences while improving speed. Installs by slipping over the string(bow press required). Weigh 16 grains each. 4 per pack.
|
Super Slipjax are designed to slip in between the string strands for maximum dampening. Made of super strong polymer and withstand bows shooting up to 320 fps. Weigh 15 grains. 4 pack.
|
String dampener that can be installed on the string without the use of a bow press. Can be fastened with serving or included zip ties.
|
String dampener that can be installed on the string without the use of a bow press. Can be fastened with serving or included zip ties.
|
Quiets the bow by surrounding the string with dampening material. Requires a bow press for installation.
|
Quiets the bow by surrounding the string with dampening material. Requires a bow press for installation.
|
Ultrajax II string silencers reduce noise and vibration by surrounding the string with dampening material. Bow does not lose velocity. Testing shows a usual increase of 1-3 FPS. Weight: 19 grains.
|
Stabilizer features noise and vibration reducing material to quiet even the noisiest bow with a multi-tiered assembly. System includes five alternating x's to suck up bow vibration and dissipate them silently.
|